EGR Not Completing

mustangblk96 · September 15th, 2006, 09:35 PM

I have this problem with my 96 mustang gt.
I have replaced all parts that run off the EGR system and still the EGR does't clear... I have check to see if I had a leack somewhere in the exhaust system but didn't find any.
Is there something I am missing to check? If someone can guide me in the right dirrection that would be cool.. Thanks guys.....

jagstang96 · September 15th, 2006, 09:55 PM

if its still not clearing check the intake for carbon buildup mine had about an 1/8 of an inch of build up around the hole were the egr mounts up also check the pipe that connects to the rear of the egr it could bel stuffed up try using some carb cleaner and blow it out with some kind of pressure like an air hose to c if it will blow trough . thats some of the restrictions that I have had problems with.

mustangblk96 · September 15th, 2006, 10:10 PM

I will check to see if that will work. I will get back to you on that one. thanks alot man

mustangblk96 · September 19th, 2006, 05:19 PM

Checked the egr for build up and it was pretty nasty and also checked the pipe that connects to the egr and goes down to the manifold It was cloged up and got that cleared out and put back together and still nothing. I was like that should do it and it didn't. That sucks..
Anthting else i should check? Thanks for the help man..

mustangblk96 · September 20th, 2006, 05:54 PM

I have h-pipes on the ride and have mil elimnators on the back o2 sensors do you think if one back o2 is bad would not the egr system do what is being done.( EGR system not completting)? Just a thought i don't know..Someone has told me that maybe that could be a problem...Anyways don't know about that part....Thanks again

mustangblk96 · September 20th, 2006, 08:49 PM

Do you think that the egr pipe may still have some carbon build up in it that it's not functionig still?

Casper98GT · September 20th, 2006, 09:18 PM

what do you mean by not clearing ?

mustangblk96 · September 21st, 2006, 05:09 PM

All it says on the scanner that my egr system is not complete.
There is no code that comes up to trigger the check engine light....

Casper98GT · September 21st, 2006, 05:46 PM

You scanner says the system is not complete, as in the drive cycle hasnt been completed. Or as in the check engine light stays on ? If it stays on there is no code ?

mustangblk96 · September 22nd, 2006, 04:56 PM

Yea it just says that the egr system is not complete..No codes that come.
I was just woundering if it would efect my inspection when it's time to get it...Normally it would say all complet on everything...

Casper98GT · September 22nd, 2006, 07:09 PM

Do you have a handheld programmer on this car at all, to where you have bypassed the EGR ? I know some handhelds you can delete the EGR./

mustangblk96 · September 22nd, 2006, 10:56 PM

Not on this one....
That would be cool if it did....LOL

mustangblk96 · September 25th, 2006, 05:21 PM

Have a hand held scanner but it wont deleat the egr.

September 15th, 2006, 09:35 PM	#1
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	EGR Not Completing I have this problem with my 96 mustang gt. I have replaced all parts that run off the EGR system and still the EGR does't clear... I have check to see if I had a leack somewhere in the exhaust system but didn't find any. Is there something I am missing to check? If someone can guide me in the right dirrection that would be cool.. Thanks guys.....

September 15th, 2006, 09:55 PM	#2
jagstang96 Regular Join Date: Aug 2006 Posts: 167	egr valve if its still not clearing check the intake for carbon buildup mine had about an 1/8 of an inch of build up around the hole were the egr mounts up also check the pipe that connects to the rear of the egr it could bel stuffed up try using some carb cleaner and blow it out with some kind of pressure like an air hose to c if it will blow trough . thats some of the restrictions that I have had problems with.

Threads Similar to: EGR Not Completing
Thread	Thread Starter	Forum	Replies	Last Post
EGR Not Completing	mustangblk96	General Tech	4	September 19th, 2006 11:00 PM

September 15th, 2006, 10:10 PM	#3
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	I will check to see if that will work. I will get back to you on that one. thanks alot man

September 19th, 2006, 05:19 PM	#4
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	Checked the egr for build up and it was pretty nasty and also checked the pipe that connects to the egr and goes down to the manifold It was cloged up and got that cleared out and put back together and still nothing. I was like that should do it and it didn't. That sucks.. Anthting else i should check? Thanks for the help man..

September 20th, 2006, 05:54 PM	#5
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	I have h-pipes on the ride and have mil elimnators on the back o2 sensors do you think if one back o2 is bad would not the egr system do what is being done.( EGR system not completting)? Just a thought i don't know..Someone has told me that maybe that could be a problem...Anyways don't know about that part....Thanks again

September 20th, 2006, 08:49 PM	#6
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	Do you think that the egr pipe may still have some carbon build up in it that it's not functionig still?

September 21st, 2006, 05:09 PM	#8
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	All it says on the scanner that my egr system is not complete. There is no code that comes up to trigger the check engine light....

September 22nd, 2006, 04:56 PM	#10
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	Yea it just says that the egr system is not complete..No codes that come. I was just woundering if it would efect my inspection when it's time to get it...Normally it would say all complet on everything...

September 22nd, 2006, 10:56 PM	#12
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	Not on this one.... That would be cool if it did....LOL

September 25th, 2006, 05:21 PM	#13
mustangblk96 Newbie Join Date: Sep 2006 Location: Allen Texas Posts: 14	Have a hand held scanner but it wont deleat the egr.

All times are GMT -4. The time now is 11:17 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

EGR Not Completing

EGR Not Completing

egr valve