[slow02gt]

ok i have a 2002 gt order some custom grind crower cams like a stage 2 but i wanted them just a lil bit bigger, had my heads ported to the max to match the header and the typhoon intake. have 75mm tb and upper plenum, also had the intake ported and everything. what should i dyno at after they get put on and everything? anybody with heads and stage 2 cams let me know what they made to the wheel.. i wanna hit 300 to the wheel.......

[TheBusher]

You should make close to 300 rwhp. Hitech's Stage 2 made 288 rwhp and the guy had less then what you have. He did have slightly higher compression then you because he has a Non-PI engine with PI heads, so you will probably make 290ish rwhp assuming you have a really good tune.
https://www.hitechmotorsport.com/sto...194755ad0b56a3

[slow02gt]

ok what do yall think is the best head and cam and intake package for a gt?

[TheBusher]

Originally Posted by slow02gt ok what do yall think is the best head and cam and intake package for a gt?

IMHO Hi-Tech makes the best cams for modular Fords, with the exception of a good custom grind.

As far as Intake goes:
CAI = 1996-2004 MUSTANG GT JLT TRUE COLD AIR KIT 1996-2004 MUSTANG GT JLT TRUE COLD AIR Complete kit [CAI-FMG-9604] - $219.00 : Zen Cart!, The Art of E-commerce
Throttle body = Throttle Bodies
Plenum = Throttle Bodies
Intake manifold = (I don't have a lot of knowledge in this area, I'm sure someone else could help you out here)
Heads = Modular Mustang Racing or https://www.hitechmotorsport.com/sto...03878ab1661319