| Home | Register | FAQ | Members List | Calendar | Blogs | Garage | Gallery | Search | Today's Posts | Mark Forums Read |
| | |||||||||||
| ||||||||||||
|
|||||||
Discussing Cam Swap Compete: 5.4 GT in the Modular Mustangs Forum. Cams are installed and the car's running pretty good. It definitely needs tuned now, ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
April 22nd, 2008, 10:09 AM
|
#1 |
|
Regular
Join Date: Jul 2007
Posts: 63
|
Cam Swap Compete: 5.4 GT It definitely needs tuned now, but it still runs smooth. It seems to have a little bit of an idle problem, and it has a little trouble starting. It wasn't as bad as we were expecting. We had to use the engine hoist to lift the motor on one side so it was tilted in the engine bay. It was very tight, but were able to remove and reinstall the valve covers without actually pulling the engine. Took us about an hour to get one bolt out, though.  Once we figured out how to get to it, it wasn't that bad. If it was a 4.6L, I think we could have done everything in one afternoon.I drove it for about 150 miles and then changed the oil last night. Drove it to work this morning and its running awesome. One of the problems with the 5.4 SOHC stock is that it really dropped off after about 4500 rpm, well with the new cams it pulled hard up to about 5200 but i stopped. It felt like it would keep going  . We installed VT Stage 1 Cams.I order a UPR cold air intake and a C&L plenum and 75mm TB this morning and hope to have it installed next week. I will be getting it dyno tuned mid next month. Here's some videos.     
|
|
April 23rd, 2008, 12:24 PM
|
#2 |
|
Regular
1999 GT Black Coupe
Join Date: Mar 2007
Location: Oregon
Posts: 65
|
Nice work....watch the plastic intake for a crack under the hose clamp...mine broken few months back and I was too late to get the free swap out from Fords lawsuit. $700 later....
__________________
#33243 5 Speed w/ Trac-control |
|
April 23rd, 2008, 01:28 PM
|
#3 |
|
Enthusiast
2000 Mustang GT
Join Date: Jan 2007
Location: Virginia Beach
Posts: 828
|
That's GREAT...
I'm about to be in the process of a 5.4 swap my self. I'm a few parts short of a complete swap and i already have bolt-ons, exhuast, ported heads and cams...I don't want to get rid of the long tubes so im planning on modifying them to fit. Good luck.. I bet with some bolt-ons that thing would be one nasty beast.. You've caught my interest with this one...keep me updated...thanks.. 
|
|
April 26th, 2008, 10:14 PM
|
#4 |
|
Regular
2004 Mustang GT
Join Date: Oct 2007
Location: Orlando
Posts: 152
|
have any of you guys gotten past the exhaust issue? i'm looking to do the swap but i'm stumped on what i need to do with the exhaust (keeping the shorties)
__________________
2004 Mustang GT: Accufab 70MM TB, C&L Plenum, UPR CAI, Pro 5.0 Shifter, Flowmaster Catback, Pypes O/R X Pipe |
|
April 30th, 2008, 08:41 AM
|
#5 |
|
Regular
Join Date: Jul 2007
Posts: 63
|
CAI TB and Plenum Installed!
I was able to get the UPR CAI, Accufab 75mm TB and the C&L Plenum installed yesterday. Took it for a spin and it is really running good. I am installing the Dynomax Cat Back tonight and hope to have some videos up by tomorrow. Enjoy the eye candy
             
|
|
May 1st, 2008, 01:44 AM
|
#6 |
|
Regular
Join Date: Jul 2007
Posts: 63
|
How about a Video?
So here's the video after i finished up the install of the Dynomax Cat Back... its dark but its the sound that matters right ?
|
|
May 2nd, 2008, 08:16 PM
|
#7 |
|
Regular
1997 mustang gt
8.06 at 87mph 1/8th mile on a 50 shot
Join Date: Nov 2006
Location: clarksville TN
Posts: 238
|
nice i like alot. have you got it tunned yet and had it been on a dyno with the 5.4 in it. also what did you use for exhaust manifolds, or headers
__________________
97 gt with 2004 pi motor,acufab intake and 75 mm bbk cold air kit,bbk long tube headers, off road h pipe,2 chamber flow, 3:73, diablo chip with dyno tune 269rwhp 301rwtq |
|
May 2nd, 2008, 09:16 PM
|
#8 |
|
Enthusiast
06 GT with bolt ons
I sucked
Join Date: Oct 2006
Location: Cincinnati, Ohio
Posts: 970
|
Sounds nice, better than my 06!
__________________
Tony wrote "Blowers blow, turbos suck, and nitrous rules!!! lol " Borla cattless L/T's topped with Flowmasters , Roush short throw, JLT2 CAI w/ X-CAL2 from Brenspeed, Bullit 18X9 and 18X10 deep dish. |
|
May 6th, 2008, 12:12 PM
|
#9 |
|
Newbie
Join Date: Apr 2008
Posts: 3
|
Do you guys have before and after time slips or dyno #s? I wanted to know the improvement the 5.4 offers over the 4.6, besides the extra torque. The swap is something Im interested in doing when my 4.6 kicks the bucket.
__________________
97 GT Conv, 5 speed, PI swapped, bolt ons. |
|
May 6th, 2008, 05:19 PM
|
#10 |
|
Regular
Join Date: Jul 2007
Posts: 63
|
Well i don't have a dyno slip before the swap. I am getting it dynotuned next weekend so i will have one after the swap
Had it at the track once before the swap and ran a 15.2 something.... completely horriable. I spun the tires off the line 
|
|
May 7th, 2008, 11:03 AM
|
#11 |
|
Regular
1997 mustang gt
8.06 at 87mph 1/8th mile on a 50 shot
Join Date: Nov 2006
Location: clarksville TN
Posts: 238
|
sweet keep us posted
__________________
97 gt with 2004 pi motor,acufab intake and 75 mm bbk cold air kit,bbk long tube headers, off road h pipe,2 chamber flow, 3:73, diablo chip with dyno tune 269rwhp 301rwtq |
|
May 7th, 2008, 11:23 AM
|
#12 |
|
Regular
Join Date: Jul 2007
Posts: 63
|
|
|
May 7th, 2008, 05:07 PM
|
#13 |
|
Editor
Join Date: Sep 2006
Posts: 825
|
nice man! sounds really good
|
|
May 7th, 2008, 06:44 PM
|
#14 |
|
I Post Entirely Way Too Much
1996 Mustang GT
14.217@98.89 MPH at 5800 FT no spray
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 6,565
|
going to be starting something really similar soon. I think i am going 5.4 but maybe that i will go 4.6 with aluminum block.
__________________
 If you are not willing to stand behind our troops, please feel free to go stand in front of them! If "drifting" were really racing, they'd have a track for it"
|
 |
| Thread Tools | |
|
|
Threads Similar to: Cam Swap Compete: 5.4 GT
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1995 351 to swap or not to swap.& how to? | Jeffery9508 | 94-95 | 7 | January 9th, 2008 12:50 AM |
| Can't decide, engine swap or PI swap? A few questions... | k3vin | 96-98 | 24 | September 5th, 2007 06:48 PM |
| Which one is easier??a rear end swap or engine swap? | Bies08 | V6 Mustangs | 32 | April 8th, 2007 07:15 PM |
| PI Head Swap and Transmission Swap | jEEd | 96-98 | 6 | January 6th, 2007 02:37 AM |
| 275.6 HP PI Swap | tlgrant | 96-98 | 16 | December 15th, 2006 07:16 PM |
