Found A Cobra For Sale Need Help

sn-95aac · November 6th, 2006, 12:51 PM

I FOUND A 96 MYSTIC COBRA FOR SALE. THE CAR IS REALLY CLEAN BUT I NOTICED WHEN THE OWNER CRANKED IT UP THEIR WAS A SCREECHING AND GRINDING NOISE COMING FROM THE TRANNY. THE CLUTCH HAS BEEN REPLACED RECENTLY AND ALSO THE WHOLE CAR VIBRATES PRETTY BAD WHEN GETTING OFF OF 1ST AND 2ND. THEY PROBABLY DIDN'T RESURFACE THE FLY WHEEL. WHAT DO YOU GUYS THINK?

96greenGT · November 14th, 2006, 09:44 PM

was the noise all the time or with the clutch pressed or released? could be a bad throw out bearing ! if pressed and the noise goes away or sounds different, its a bad throw out bearing. i had mine fail on me on a christmas eve a few years back and replaced it in the drive way with minimal tools on a cold, wet rocky ground.
the vibration, well, if you feel it in the pedal while pushing the clutch in a bit rolling, would give you a pulsation feeling in the pedal. unless it has some bad internals... sounds like input shaft possibly.

November 6th, 2006, 12:51 PM	#1
sn-95aac Regular Join Date: Oct 2006 Posts: 101	Found A Cobra For Sale Need Help I FOUND A 96 MYSTIC COBRA FOR SALE. THE CAR IS REALLY CLEAN BUT I NOTICED WHEN THE OWNER CRANKED IT UP THEIR WAS A SCREECHING AND GRINDING NOISE COMING FROM THE TRANNY. THE CLUTCH HAS BEEN REPLACED RECENTLY AND ALSO THE WHOLE CAR VIBRATES PRETTY BAD WHEN GETTING OFF OF 1ST AND 2ND. THEY PROBABLY DIDN'T RESURFACE THE FLY WHEEL. WHAT DO YOU GUYS THINK? __________________ 95 TURBOCHARGED COBRA 87 BLOW-THRU FOX

Threads Similar to: Found A Cobra For Sale Need Help
Thread	Thread Starter	Forum	Replies	Last Post
2003 Cobra For Sale	spray175	For Sale	3	July 31st, 2007 09:21 PM
Here Goes Nothin... Cobra for Sale!	Corn_fed_98Cobra	96-98	10	July 25th, 2007 04:46 PM
2001 Cobra for sale	HMUSN	For Sale	0	May 16th, 2007 07:41 PM
look at this 1997 cobra for sale	k2boarder3187	96-98	8	April 15th, 2007 09:52 PM
FS: 95 cobra r rims For sale!!!	Rantheman	For Sale	20	August 3rd, 2006 11:22 PM

November 14th, 2006, 09:44 PM	#2
96greenGT Newbie Join Date: Oct 2006 Posts: 29	was the noise all the time or with the clutch pressed or released? could be a bad throw out bearing ! if pressed and the noise goes away or sounds different, its a bad throw out bearing. i had mine fail on me on a christmas eve a few years back and replaced it in the drive way with minimal tools on a cold, wet rocky ground. the vibration, well, if you feel it in the pedal while pushing the clutch in a bit rolling, would give you a pulsation feeling in the pedal. unless it has some bad internals... sounds like input shaft possibly.

All times are GMT -4. The time now is 05:08 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.