[mousaleeni]

Nice! Question, is it impossible to swap the door panels? If I recall, you are using the Fox panels?

[McMustang5.0]

Dude, you need a cool spoiler on that bad boy and it would be epic! (not that it isn't already!)

Thats pretty much the sickest build ever! I'm a senior in H.S. to but dude you've got mad skills!

I see the next Chip foose?!?! only awesomer!

[Andy92coupe]

That looks awesome. I bought my 2001 gt donor car 2 days ago. it is a 5 speed car and im putting dash, motor, tranny in my 92 coupe. this forum gives me plenty of motivation. im planning on taking the motor to a shop soon to get cams and a few more mods before installing into my coupe. The more posts and pics on this forum the better. thanks

[nick wright]

hey man i'm 17 and still in high school and i also live in tennessee i live in a tiny town call lawrenceburg and i've been thinking about putting a 4.6 in my 87 coupe execpt i'm wanting a 4.6 4v out of a cobra or navigator and a 5 speed in my car then sometime in the future i'm going to put a either a prochger D1 on it or a twin turbo setup how much exhaust clearance do u have is it a tight fit? or is there plenty of room i don't know much about the 4.6 i've just started looking into them do u know how much a stock 4.6 4v modular motor internals can handle i've heard that they came with forged pistons i know the blocks can handle 1000+hp thats why i'm getting rid of my 5.0 no stock 5.0 block can handle 1000+hp hek they can barely hold up to 500hp i've personaly seen them split at just a little over 500 with a main girdle and valley girdle thats why i'm going to a 4.6 but they are extermly expensive to build

[fox4.6]

Originally Posted by 92Coupe I know this is an old post but I'm looking for some help. Since Fox4.6 did the same swap I'm about to attempt I was hoping to get some assistance. I'm using a 92 coupe with a 2002 GT as my donor. It's an automatic also and I was wondering if you had to move the transmission cross member? Any pointers or things to look out for? I'm hoping to use the abs, traction control, power steering and a/c. I really don't know if I'm going to use the air bags or not though. Did you retain all of these functions? Thanks for any help you can give me it's greatly appreciated.

The way I did mine was to cut out the trans mounts off the 2000, bolt them ontot the transmission, jack it up and into place, and weld the mounts in. Not as bad as it sounds because it fits fretty good. Yes, every function works except the air bags because I didn't hook them up.

[fox4.6]

Hello everyone. Sorry I have been so long replying to everything but I entered college this fall and moved to Cookeville, Tennessee, so I haven't had much time to post. In the next few days I will try to get everyone replied to and get an update on here. To everyone thinking about doing a swap like this, Best Of Luck!! It will be hard work. I can't say whether or not it is worth it because everyone looks at things differently, but It Was Definetly Worth It To Me!nIf anyone needs help I will do my best to help people out. My best advice is to go slow and do it right. Good luck to all and God Bless.

[andrews4691]

have you tried 1979 fox body door handles in they sit at the bottom of the door all parts should work. also 78-79 fox body t-birds fairmonts zephers, and 79 capri if i remember right all handles a the bottom of the door. Curis

[Crafthell]

I too am swapping a 4.6 2v into my 93 mustang lx... i just had a 92 grand marquise given to me so i wanna take that motor and make it happen.. But i need to know what wiring harness i could use? since the motor is the same as 96-98? Mustang GT could i use that harness and computer? or is there a kit i could buy?.. This too is going to be automatic.. What driveshaft did u use?

[interceptor999]

I am also doing a 4.6 swap and I ALSO am swapping it out of a panther 1999 Ford Police Interceptor, But I think the one I'm helping build is going to be a manual trans.

Btw FIX YOUR PICS! I see NOTHING!

Pix or it didn't happen.

[kyle2002stang!]

i cant see the pictures, but judging by the comments it must be pretty badass!

[mustang_mike]

Originally Posted by kyleD.31 i cant see the pictures, but judging by the comments it must be pretty badass!

me eitherr suckss i wanna check this hog out lol

[mustang_mike]

i see now awesome job man !!

[Av8tor]

Sounds like an awesome swap, but the pics arent working for me

[86fox]

would love to see the pics. anyone know how i can see them?

[fox4.6]

[fox4.6]

Hello everyone, sorry it has been so long since I have been online. I am currently a junior at tennessee tech university majoring in ag engineering. I have come a long ways on this project since I started, which was 4 years ago nearly and I can hardly believe it was that long. The car is up and running and everything works and I drove it nearly every day over the summer. Since the photos I posted I have added a wing off a 93 convertible, which sets it off nicely. Now for what everyone wants to know, it ill get up and go pretty good. It is geared extremely high(stock for a 2000), so the low end is not that good, but still enough to leave pos marks for about 100 feet(I stepped them off). This car does better from 60-120 than from 0-60. I am wanting to put a set of 3.83 rear gears in it, which I believe will make it a real neck snapper. Thanks for everyone's positive feedbacks, I'll try to update more in the next few days, and if you have any questions feel free to ask.

[32vFox]

i have a few questions.. howd u bypass the PATS off of the 2000? or did u just rewire evrything onto the fox?
did u use the stock k member off the fox or did u use the k member off the edge?
and last question...the hydrobooster... did u use the new edge one orrrrr??

[200440th]

Pics pic pics :d

[Uberstang1]

Nice swap man don't see it everyday, I'd change out the wheels for some reason they don't look right must be the offset.

[Vind03gt]

Wow man. Nice ride. When I read the description I had my doubts, but after seeing the pics I really like it. Looks really sleeper like.