My 4.6 Fox body

fox4.6 · June 23rd, 2008, 01:44 PM

Check it out. I am kindly a new member here so let me tell you a little about myself. My name is Matt. I am 16 nearly 17 and i live in a little ol town called celina TN. I started my mustang project about one year ago, and i nearly have it done. I could drive it right now. I did a 4.6 to fox body swap. I took the entire suspension, motor, drivetrain, and interior out of a 2000 gt and put it in a 93 coupe. I could write a whole book about it so check out the pictures, tell me what you think, give me any suggestions you have, and feel free to ask questions.

beckerb · June 23rd, 2008, 01:48 PM

How about some pictures ?

1FastFox · June 23rd, 2008, 01:50 PM

Post the pictures here ( for thsoe who dont have a myspace act )...

-- Like me --

fox4.6 · June 23rd, 2008, 01:57 PM

I'm working on pics. I'm a newbie and it took me a min to figure out how. I will get them up asap.

fox4.6 · June 23rd, 2008, 02:02 PM

Here ya go i will try to get some better ones on later sorry about the delay. I'm a newb and experience is something you don't have until after you need it.

mustangmanic · June 23rd, 2008, 05:04 PM

Thats awsome bro!

Arctic Fox · June 23rd, 2008, 05:42 PM

Sweet! Was that 4-banger before?

fox4.6 · June 23rd, 2008, 07:02 PM

Yes, it was a 4 banger, but i saved it from its miserable life and stuck the ol 4.6 in it.
It is not done. I still have quite a bit of small stuff to do, but with a set of hood pins it is ready to hit the road right now. It has been a very interesting experience to get it to this point. I would definetly do it again. Feel free to ask me any questions about it you have.

My 4.6 Fox body-mustangdoneedited-023.jpg

My 4.6 Fox body-mustangdoneedited-019.jpg

My 4.6 Fox body-mustangdoneedited-017.jpg

ReverendDexter · June 23rd, 2008, 07:48 PM

Just two: why the automatic, and do you need the cowl-induction hood to clear the motor? Oh, I guess three: when's it getting lowering springs?

fox4.6 · June 23rd, 2008, 08:53 PM

1. I used the automatic because it was what we had. 2 I have the cowl on there for looks. The motor would clear a stock hood, but barely. 3 I am getting lowering springs if i ever get the money and time to change them. Right now i am about ready to be done working on it for a while and just drive it.

93lx306dev · June 23rd, 2008, 11:49 PM

was there alot of fabrication to put that dash in there? cause i want to do that this winter why it is in storage.....

fox4.6 · June 24th, 2008, 11:58 AM

Yeah. The dash was the worst part. We had to put it in and out of the car about 10 times.

HMUSN · June 24th, 2008, 12:17 PM

got a write up by chance on the dash? I like it.

fox4.6 · June 24th, 2008, 04:45 PM

2000 Dash in Fox body

yojoe600 · June 24th, 2008, 04:50 PM

that is a great looking job on the interior now that you have that i think more people will try this swap and a write up will help

futureMACH1racer · June 24th, 2008, 07:21 PM

Very nice bro, very nice.

94v6blkndred · June 25th, 2008, 09:21 PM

thats awesome...my friend i go to school with did the same motor swap...shits sick

HorsepoweR · June 25th, 2008, 10:25 PM

Thats sick man...Awesome as hell!

bigmike83 · June 25th, 2008, 11:06 PM

can we get a wiring write up please.
thanks
mike

fox4.6 · June 25th, 2008, 11:14 PM

The wiring was actually pretty simple. We took the wiring off the 2000 car and swapped all of it over to the 93 car in the exact same locations. We had to make a couple of bolt holes but other than that it swapped over fine.

June 23rd, 2008, 01:44 PM	#1
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	My 4.6 Fox body Check it out. I am kindly a new member here so let me tell you a little about myself. My name is Matt. I am 16 nearly 17 and i live in a little ol town called celina TN. I started my mustang project about one year ago, and i nearly have it done. I could drive it right now. I did a 4.6 to fox body swap. I took the entire suspension, motor, drivetrain, and interior out of a 2000 gt and put it in a 93 coupe. I could write a whole book about it so check out the pictures, tell me what you think, give me any suggestions you have, and feel free to ask questions. Last edited by fox4.6; June 23rd, 2008 at 01:50 PM.

June 23rd, 2008, 01:48 PM	#2
beckerb Regular 2004 Mach 1 -Pro Charger Join Date: May 2008 Location: North Carolina Posts: 70 iTrader: 0 reviews	How about some pictures ? __________________ 2007 Dodge SRT-8 Superbee 2007 Hemi Quad Cab 4X4 2004 Ford MACH I Mustang, Pro-Charger 535 RWHP 2002 Viper SRT-10 575RWHP, 1985 Mustang GT 1992 Stealth RT TT 633.9 AWHP 1992 Stealth RT

June 23rd, 2008, 01:50 PM	#3
1FastFox Skirt Chasing Philanderer Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 8,977 iTrader: 4 reviews	Post the pictures here ( for thsoe who dont have a myspace act )... -- Like me -- __________________ Might want to consider writing down what is said above, it will help you at some point or another in your life!

June 23rd, 2008, 05:04 PM	#6
mustangmanic MM Fanatic 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,108 iTrader: 2 reviews	Thats awsome bro! __________________

June 23rd, 2008, 07:48 PM	#9
ReverendDexter Priest of the Car Gods Clapped-out '90 GT 'vert ~5.5 seconds off TTOD :( Join Date: Jan 2007 Location: Rohnert Park, CA Posts: 13,233 iTrader: 0 reviews	Just two: why the automatic, and do you need the cowl-induction hood to clear the motor? Oh, I guess three: when's it getting lowering springs? __________________ O o /¯/______________________ \|BLAAAAAAAAAAAAAAAAAAAAAAAAARGH!!! \_\ Buy my Bronco, special deal for MM folks

June 23rd, 2008, 01:57 PM	#4
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	I'm working on pics. I'm a newbie and it took me a min to figure out how. I will get them up asap.

June 23rd, 2008, 02:02 PM	#5
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	Here ya go i will try to get some better ones on later sorry about the delay. I'm a newb and experience is something you don't have until after you need it.

June 23rd, 2008, 07:02 PM	#8
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	Yes, it was a 4 banger, but i saved it from its miserable life and stuck the ol 4.6 in it. It is not done. I still have quite a bit of small stuff to do, but with a set of hood pins it is ready to hit the road right now. It has been a very interesting experience to get it to this point. I would definetly do it again. Feel free to ask me any questions about it you have.

June 23rd, 2008, 08:53 PM	#10
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	1. I used the automatic because it was what we had. 2 I have the cowl on there for looks. The motor would clear a stock hood, but barely. 3 I am getting lowering springs if i ever get the money and time to change them. Right now i am about ready to be done working on it for a while and just drive it.

June 23rd, 2008, 11:49 PM	#11
93lx306dev Regular 1993 ford mustang lx 302 13.2 @ 104mph Join Date: Oct 2007 Posts: 173 iTrader: 0 reviews	was there alot of fabrication to put that dash in there? cause i want to do that this winter why it is in storage..... __________________ FORD = FOUND ON ROAD DOMINATING www.myspace.com/stangdevin

June 24th, 2008, 11:58 AM	#12
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	Yeah. The dash was the worst part. We had to put it in and out of the car about 10 times.

June 24th, 2008, 12:17 PM	#13
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	got a write up by chance on the dash? I like it. __________________

June 24th, 2008, 04:45 PM	#14
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	2000 Dash in Fox body

June 24th, 2008, 07:21 PM	#16
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,901 iTrader: 0 reviews	Very nice bro, very nice. __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

June 25th, 2008, 09:21 PM	#17
94v6blkndred Hardcore Enthusiast 02 Turboed Saleen Clone faster than my v6 Join Date: Mar 2007 Location: Houston, TX Posts: 1,552 iTrader: 0 reviews	thats awesome...my friend i go to school with did the same motor swap...shits sick __________________ 94v6.CAI,Exhaust,3:73s-needs rear end rebuild 02GT/Saleen.built motor,62mm turbo 412hp/446tq @10psi,stock TB and intake

June 25th, 2008, 10:25 PM	#18
HorsepoweR Enthusiast 99 SVT Cobra N/A Yet Join Date: Jul 2007 Location: McHenry, iLLinois Posts: 546 iTrader: 1 reviews	Thats sick man...Awesome as hell! __________________ Mods iN Garage.:.919 of 4040.:.Born on 3/29/99 Found On Road Dominating

June 25th, 2008, 11:06 PM	#19
bigmike83 Regular 1997 mustang gt 8.06 at 87mph 1/8th mile on a 50 shot Join Date: Nov 2006 Location: clarksville TN Posts: 284 iTrader: 0 reviews	can we get a wiring write up please. thanks mike __________________ 97 gt with 2004 pi motor,acufab intake and 75 mm bbk cold air kit,bbk long tube headers, off road h pipe,2 chamber flow, 3:73, diablo chip with dyno tune 269rwhp 301rwtq 5.4 SOHC FOR SALE pm me for details

June 25th, 2008, 11:14 PM	#20
fox4.6 Regular 1993/2000 Mustang GT Yet to be determined Join Date: Sep 2007 Location: Celina TN Posts: 59 iTrader: 0 reviews	The wiring was actually pretty simple. We took the wiring off the 2000 car and swapped all of it over to the 93 car in the exact same locations. We had to make a couple of bolt holes but other than that it swapped over fine.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/modular-mustangs/77112-my-4-6-fox-body.html
Posted By	For	Type	Date
99-04 dash in a fox body how to do it? \| Mustang Forums at StangNet	This thread	Refback	December 4th, 2011 12:51 PM
5.4 in a Fox Body	This thread	Refback	September 28th, 2010 09:06 PM
99-04 dash in a fox body how to do it? - Mustang Forums at StangNet	This thread	Refback	July 24th, 2009 09:43 PM
MySpace.com - External Link Alert	This thread	Refback	May 13th, 2009 07:38 AM
99-04 dash in a fox body how to do it? - Mustang Forums at StangNet	This thread	Pingback	January 30th, 2009 11:02 PM
My 4.6 Fox body	This thread	Refback	June 26th, 2008 07:33 PM

Threads Similar to: My 4.6 Fox body
Thread	Thread Starter	Forum	Replies	Last Post
Looking to get a Fox-body.....	nitrorustlerpro15	5.0 Mustangs	39	June 22nd, 2008 12:36 PM
fox body 5.0 in 94-95	WarriorXonE	5.0 Mustangs	16	January 13th, 2008 02:17 PM
The Fox Body	Danderson	5.0 Mustangs	54	November 14th, 2007 12:33 AM
Fox Body	Brenda	The Clubhouse	30	September 10th, 2007 07:27 PM
will a 94' to 98' body style rear end fit under a fox body	frankenstein	5.0 Mustangs	3	July 13th, 2006 10:53 PM

All times are GMT -4. The time now is 06:58 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.