New Guy And Need Mustang Guys Advice, Come Comment Guys!

redneckstone · September 26th, 2006, 12:40 AM

OK first off I am here here and want to say HI..I am not new to forums tho, so i wont be that stupid newb lol...I am THE TOP poster and senoir member at ranger-forums.com. I have owned a few rangers. looking at a mustang to have fun with tho. thats where i need your help! I have been reading around and like what i see nice site guys!

ok i will get on with it now lol...

here is cell phone pics i took earlier of a mustang, 1996 GT wanting $4000 obo has 116000 on it..stored winters eibock springs, flowmasters, 4.10 and no chip so the millage is acully higher then it should be, short throw, newer trans 5 speed, clean interor black leather. i think thats it, i was running late for class and didnt have time to ask about the motor or anything else i have his # tho...

question is does this seem ok. how are the 4.6L over 100000? i mean it isnt hard for me to rebuild a motor i can do it in a weekend. but any advice on this car would be nice thanks guys...

Also to show I am a motor head. here is my XLT(silver truck) and my recently sold toy the splash(orange/red), Notice the wheels guys

drgnracin72 · September 26th, 2006, 07:52 AM

welcome to the site. were glad to have ya around. the mod motors are fine over 100,000 miles as long as they were takin care of. looks like a good lookin car, but look a little deeper, get a carfax and make sure you go over everything really well. come stop by and sign the member's map. again were glad to have ya and ill cya on the boards

ChrisJ · September 26th, 2006, 08:03 AM

Yeah the 4.6's are fine...Just depends on how the mileadge was put on them...

For that year a set of PI heads would be perfect...If you get the car let me know I will have a pi swap heads up for sale in about 4 months...

I would get a carfax no matter what...

Your only going to see about 200rwhp from the car...

What do you mean about the chip?

That does not seem to be a bad price at all for the car...

Best of lukc and welcome to the site...

orangeRcode · September 26th, 2006, 01:43 PM

Welcome to MM.

turp · September 26th, 2006, 01:45 PM

Welcome.

99mustang232 · September 26th, 2006, 02:29 PM

welcome to moddedmustangs, invite some friends!

Bish · September 26th, 2006, 03:40 PM

Welcome to MM!!

mdvaldosta · September 26th, 2006, 03:42 PM

Welcome to MM dude, diggin the bullitt wheels on the Ranger

The 4.6's aren't exactly known for their longevity, though they can last a long time with good maintenance. It's a good looking Mustang, certainly worth $4k in my opinion.

L33T · September 26th, 2006, 05:44 PM

How old is the guy selling it?
I bet he beat on it pretty good, that's what guys are 'sposed to do with a GT.
+1 carfax

If you can rebuild in a weekend why worry about the 100k motor, just move into something else right away?

Welcome to MM and I dig the wheels on that Ranger man. Nice touch.

redneckstone · September 26th, 2006, 06:10 PM

Originally Posted by L33T

How old is the guy selling it?
I bet he beat on it pretty good, that's what guys are 'sposed to do with a GT.
+1 carfax

If you can rebuild in a weekend why worry about the 100k motor, just move into something else right away?

Welcome to MM and I dig the wheels on that Ranger man. Nice touch.

Late 20's ish i wouldnt doupt he hasnt full throttled it hell i mean i would when i got it lol..who wouldnt. I am asking because i would like to somewhat enjoy the car before i have to rip into the motor. i mean hell from what i have been reading for the past few hours on here about the NPI motors is that there pretty much junk. i would look for a newer 99+ PI motor or even a like 03 cobra motor before i would rebuild this thing now. good thing i have a family friend that owns a junk yard.

and thats for all the welcome guys. kinda sad that truck is now sold and gone thats probly why i am so ichy to buy a new project vehical the splash was my project it was a junk yard dog basically...fixed her up...

yes same truck...

Dennis-96GT · October 4th, 2006, 12:52 PM

wow i got screwed i paid 6500 for my completley stock 96 gt lol with 120,000 on it i think im gona go pout now lol

ckthecerealkiller · October 4th, 2006, 07:02 PM

That is a good deal, don't worry about everyone saying that the NPI motors are junk....... That is total BS, they may not be as quick as a PI motor but I prefer the body style and they go for so much cheaper cause they are thought of as "old."

But anyway I have a 97 GT with about 135,000 miles and it doesn't even tick. I paid 4600 though and it is stock with black cloth interior. I'd pay for it in a heartbeat.

September 26th, 2006, 12:40 AM	#1
redneckstone Newbie Join Date: Sep 2006 Posts: 8	New Guy And Need Mustang Guys Advice, Come Comment Guys! OK first off I am here here and want to say HI..I am not new to forums tho, so i wont be that stupid newb lol...I am THE TOP poster and senoir member at ranger-forums.com. I have owned a few rangers. looking at a mustang to have fun with tho. thats where i need your help! I have been reading around and like what i see nice site guys! ok i will get on with it now lol... here is cell phone pics i took earlier of a mustang, 1996 GT wanting $4000 obo has 116000 on it..stored winters eibock springs, flowmasters, 4.10 and no chip so the millage is acully higher then it should be, short throw, newer trans 5 speed, clean interor black leather. i think thats it, i was running late for class and didnt have time to ask about the motor or anything else i have his # tho... question is does this seem ok. how are the 4.6L over 100000? i mean it isnt hard for me to rebuild a motor i can do it in a weekend. but any advice on this car would be nice thanks guys... Also to show I am a motor head. here is my XLT(silver truck) and my recently sold toy the splash(orange/red), Notice the wheels guys

September 26th, 2006, 08:03 AM	#3
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,716	Yeah the 4.6's are fine...Just depends on how the mileadge was put on them... For that year a set of PI heads would be perfect...If you get the car let me know I will have a pi swap heads up for sale in about 4 months... I would get a carfax no matter what... Your only going to see about 200rwhp from the car... What do you mean about the chip? That does not seem to be a bad price at all for the car... Best of lukc and welcome to the site... __________________ My Junk www.myspace.com/cjobe

September 26th, 2006, 01:43 PM	#4
orangeRcode Hardcore Enthusiast 12.37@110.89 Join Date: May 2006 Location: Mustang/Yukon, OK Posts: 1,778	Welcome to MM. __________________ http://www.moddedmustangs.com/forums/image-apic687.jpg

September 26th, 2006, 01:45 PM	#5
turp Moderator 1989 MUSTANG LX 5.0 16.17@86.21(bone stock on street tires) Join Date: Aug 2005 Location: Virginia Beach, VA Posts: 2,893	Welcome. __________________ SUPPORT YOUR LOCAL HOOKERS....HUG A TOW TRUCK DRIVER! Donate to lxhatch@gmail.com

September 26th, 2006, 02:29 PM	#6
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,717	welcome to moddedmustangs, invite some friends! __________________ ...even fire and single cammin

September 26th, 2006, 03:40 PM	#7
Bish Enthusiast Join Date: Jul 2006 Posts: 769	Welcome to MM!! __________________ Bish http://i25.photobucket.com/albums/c5...ForumSig-1.jpg

September 26th, 2006, 03:42 PM	#8
mdvaldosta Maintenance Man 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,928	Welcome to MM dude, diggin the bullitt wheels on the Ranger The 4.6's aren't exactly known for their longevity, though they can last a long time with good maintenance. It's a good looking Mustang, certainly worth $4k in my opinion.

September 26th, 2006, 05:44 PM	#9
L33T Enthusiast Join Date: Dec 2005 Location: Newport News, VA Posts: 732	How old is the guy selling it? I bet he beat on it pretty good, that's what guys are 'sposed to do with a GT. +1 carfax If you can rebuild in a weekend why worry about the 100k motor, just move into something else right away? Welcome to MM and I dig the wheels on that Ranger man. Nice touch.

October 4th, 2006, 12:52 PM	#11
Dennis-96GT Enthusiast 1996 Mustang GT 11h47m32s Join Date: Sep 2006 Location: ozark mo Posts: 611	wow i got screwed i paid 6500 for my completley stock 96 gt lol with 120,000 on it i think im gona go pout now lol __________________ Red Mustang Society: Founder Member of the I don't like my shit centerd and want it back the way it was dammit! club POLITICS THE MOST ACURTE USE OF A WORD POLI=MANY TICS=BLOOD SUCKING CREATURES

October 4th, 2006, 07:02 PM	#12
ckthecerealkiller Enthusiast Join Date: Oct 2005 Location: Greeley Colorado with high rate of living an low wages baby! Posts: 935	That is a good deal, don't worry about everyone saying that the NPI motors are junk....... That is total BS, they may not be as quick as a PI motor but I prefer the body style and they go for so much cheaper cause they are thought of as "old." But anyway I have a 97 GT with about 135,000 miles and it doesn't even tick. I paid 4600 though and it is stock with black cloth interior. I'd pay for it in a heartbeat.

Threads Similar to: New Guy And Need Mustang Guys Advice, Come Comment Guys!
Thread	Thread Starter	Forum	Replies	Last Post
hey guys! new here and need advice!	Monster stang 97	96-98	25	October 14th, 2007 04:37 PM
Some advice please guys...	MSTGGT00	All Other Vehicles	7	February 6th, 2007 10:42 PM
any mustang guys in Az. ?	95 GT ragtop	5.0 Mustangs	0	November 27th, 2006 02:00 PM
Man atleast your guys mustang doesnt look like this.	fightrice	The Clubhouse	12	May 14th, 2006 12:41 AM
mustang guys in houston?	kbstang	The Clubhouse	2	March 21st, 2006 01:18 PM

All times are GMT -4. The time now is 07:23 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.