Beware Extreme Dimensions bumpers

Chance · March 28th, 2009, 10:34 AM

Extreme Dimensions is the reported maker of a variety of aftermarket bumpers widely available from a variety of sites. Buyer Beware. My experience has been terrible with this company. Their product is made overseas and is of inferrior quality. Mine came with a quarter size hole where the mold did not take and other spots where the urithane was so thin it warped and buckled during the baking procedure. It had hundreds of dimples across the face and contained an excessive amount of release agent. Unfortunately we did not discover the extent of problems we were about to face until after the prep precess began. When we contacted the maker it took them over 2 weeks to reply and had the nerve to say "Sorry for the problems you are having, this time we will make an exception and apologize. Have a nice day." That IS paraphrased but was the gist of it. It cost me nearly $800 to have this bumper prepped and painted over and above the cost of the part plus shipping. They finally offered to replace the part but by then it was way too late. My advice would be to not to buy any part manufactured by Extreme Dimensions.

vistabluestang05 · March 31st, 2009, 03:35 PM

wow that is a A+ company......

Chance · March 31st, 2009, 07:45 PM

Originally Posted by vistabluestang05

wow that is a A+ company......

I don't know how you give them that rating but don't believe it. Telling me this time they would make an exception and apologize? Give me a break. There are too many additional details to list here but basically they told me to go F myself.

FluffyTheRhino · March 31st, 2009, 08:21 PM

I believe he was just being sarcastic in his assessment.

Chance · March 31st, 2009, 08:57 PM

Originally Posted by FluffyTheRhino

I believe he was just being sarcastic in his assessment.

Oh, too bad.

vistabluestang05 · April 2nd, 2009, 12:06 AM

^^^^yea i was.... that company sucks ass dude

Chance · April 2nd, 2009, 12:35 AM

Originally Posted by vistabluestang05

^^^^yea i was.... that company sucks ass dude

Ok so just make sure you spread the word to any forum you belong to. I for one don't want them ripping off any other Mustang owners or anyone else for that matter.

Chance

Mattman · May 14th, 2009, 06:43 AM

Thanks for the heads up man! My friend ordered a shogun body kit from them for a CRX and it fit so poorly that he molded in the entire body kit

March 28th, 2009, 10:34 AM	#1
Chance Newbie 2006 GT CONVERTABLE Join Date: Mar 2009 Location: Broomfield Colorado Posts: 23	Beware Extreme Dimensions bumpers Extreme Dimensions is the reported maker of a variety of aftermarket bumpers widely available from a variety of sites. Buyer Beware. My experience has been terrible with this company. Their product is made overseas and is of inferrior quality. Mine came with a quarter size hole where the mold did not take and other spots where the urithane was so thin it warped and buckled during the baking procedure. It had hundreds of dimples across the face and contained an excessive amount of release agent. Unfortunately we did not discover the extent of problems we were about to face until after the prep precess began. When we contacted the maker it took them over 2 weeks to reply and had the nerve to say "Sorry for the problems you are having, this time we will make an exception and apologize. Have a nice day." That IS paraphrased but was the gist of it. It cost me nearly $800 to have this bumper prepped and painted over and above the cost of the part plus shipping. They finally offered to replace the part but by then it was way too late. My advice would be to not to buy any part manufactured by Extreme Dimensions.

March 31st, 2009, 03:35 PM	#2
vistabluestang05 Regular 2005 Mustang GT Join Date: Dec 2008 Location: Delaware/Marlyand Posts: 98	wow that is a A+ company...... __________________ 05 GT, C&L Racer intake, Steeda underdrive pullys, bassani catted x, slp loudmouth, 4.10, hurst short throw, Bama Race tune, CHE LCA, Comp stage II cams, CMCV deletes

April 2nd, 2009, 12:06 AM	#6
vistabluestang05 Regular 2005 Mustang GT Join Date: Dec 2008 Location: Delaware/Marlyand Posts: 98	^^^^yea i was.... that company sucks ass dude __________________ 05 GT, C&L Racer intake, Steeda underdrive pullys, bassani catted x, slp loudmouth, 4.10, hurst short throw, Bama Race tune, CHE LCA, Comp stage II cams, CMCV deletes

Threads Similar to: Beware Extreme Dimensions bumpers
Thread	Thread Starter	Forum	Replies	Last Post
Head unit dimensions	Archy88	Electronics	2	March 11th, 2009 10:36 PM
Tire dimensions?	mineralmustang05	2005+	2	February 3rd, 2008 11:40 PM
Does Anyone Know The Dimensions Of A 06 GT Throttle Body Spacer	Ataylor	2005+	28	November 20th, 2007 08:37 AM
chassis-body dimensions	lemon	99-04	0	September 7th, 2006 09:06 PM
'01, '02, '03, '04 Mustang Trunk Dimensions	rocko1290	V6 Mustangs	14	August 27th, 2006 01:53 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

All times are GMT -4. The time now is 03:20 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

Beware Extreme Dimensions bumpers

Beware Extreme Dimensions bumpers

So spread the word.