[Juggalo_X]

Originally Posted by dburklen bump ok so how about for people like me who are car stupid who would definatley break something with this do they offer tunes you can get made for your car or is this pretty much done in short bus terms lol

you do the tunes your self but all you got ot do is shoot Sniper a line give them your ride info and they will email yah back with the settings they recommend. but seriously its dead simple. I was up and going in a matter of 20 min and i have never touched a tuner before. And of course you always have MM to ask the question as well lots of smart people here. and im pretty familiar with the software now so u can always PM me.

[Juggalo_X]

Comparison chard for features. As i stated before the Sniper package is the Cheapest around for the software and flasher bundle that offers full user controllability for flashing and making tunes.... you DO NOT have to pay some one to make custom tunes for you!

[G.T. Rags]

does anyone know if you can use this device on multpile cars?

[Juggalo_X]

Originally Posted by 96GTRagTop does anyone know if you can use this device on multpile cars?

Yes you can you can use it on @ cars Out of the box but the # is unlimited if you choose to Purchase More Bullets For the tuner so if u have 6 ford vehicles you can tune all 6

[G.T. Rags]

what do u mean more bullets for the tuner?

[Juggalo_X]

Originally Posted by 96GTRagTop what do u mean more bullets for the tuner?

Bullettes basically allow you to tune an extra vehicle. the package comes with 2. if you wish to tune a third car then you have to purchase another bullet to do so. or you will have to re flash the stock pcm to one of your cars which will free up one of the original 2 bullet the package came with.

[El_Cangri]

by curiosity how this bullet work? i know what it does but u buy it then what?

[Juggalo_X]

Originally Posted by El_Cangri by curiosity how this bullet work? i know what it does but u buy it then what?

You use the sniper bullet utility put in your unlocking code into it and it unlocks a new vin on your interface.

[geoffav]

Originally Posted by Juggalo_X Originally Posted by 96GTRagTop does anyone know if you can use this device on multpile cars? Yes you can you can use it on @ cars Out of the box but the # is unlimited if you choose to Purchase More Bullets For the tuner so if u have 6 ford vehicles you can tune all 6

I agree with the above and tune 3 with mine.

It's long but I will add a post I made on another thread, I just picked up the 3rd car so it is not mentioned. It currently has a SCT chip but it will be Sniper tuned in the next few weeks. The new car is a 2003 Cobra with a KB Blower.

Post below with my results, the post was to a thread that had every positive comment about Sniper being called spam from a vendor (I'm not a vendor):

Wow, I'm an end user of Special Forces and Commando and this is kind of a strange thread. I don't know how many posts I have on here but the number is low. There was not much real info above about results so let me give you some input.

I spend most of my time on Mach1, hot rod, and turbocharger related sites because my current project is a 35 Chevy Coupe former east coast Modified oval track car. It will be powered by a DOHC Ford with a C4 and have 8 individual TB's to simulate injection of that era but will be computer controlled.

The Sniper products are used on my two Mustangs. First I have a 2004 Mach1 with a herd of bolt-ons that I first tuned with a Predator (did not like the datalogging reliability), switched to the Xcal2 which had datalogging I liked but limited end user adjustability, now I use the Sniper Special Forces on both of my Mustangs.

I plan to datalog both using Recon when it's available but currently us a locked Xcal2 I bought cheap and make use of the Innovate WB/DL32 to get a full picture of how each is performing.

Obviously the Special Forces does everything the bolt-on guy would need but my other Mustang goes a bit further. It's a Twin Turbo 2002 GT that has a nearly stock motor at the moment. I have a built motor almost ready for install. It is all forged with 8.5 cr, cams intended for turbos, and will displace 5.2L. The car is ready for the motor with a TKO600, built IRS with a 3.27 gear, and Cobra tank with dual cobra pumps. The induction system includes a P&P Bullitt intake and uses 42# injectors at the moment.

If I was not upgrading the motor, the SF tune would be fine. Because we play with new parts continuously on the GT, I decided to upgrade to Commando. I have used several of the standalones in hot rods and Cobra replicas (Electromotive, Redline, and SDS) so I'm accustomed to their associated software. I have some experience with the PRP (which I like) by hanging out with some shop owners. Commando does everything the PRP does and I'm not the least bit disappointed. I'm early in the process and frankly have not used a Commando tweaked tune in the GT yet but I'm refining what I want in the initial tune with the built motor.

Results = Mach1 with the initial SF tune runs great with the AF flat at 12.1 thru the rpm range. It has the EGR removed, o/r exhaust, gear, TC turned off, and different size tires in addition to the ton of bolt-ons. I did 1 tune that took less than 1 hour from when I opened the Sniper box. I never had a code, it runs great, and didn't even need the first mod. The car has not been back on the dyno, I care more about how it does on the fly. It runs 12.88@109 previous best was 12.93@108.

Results = The TT GT runs much better than before on the chip from a dyno tune. Strange thing is it gave me a code the second run cycle after the tune. I reinstalled the chip and it went away but went back to running crappy. As it turned out we had an IAT issue that was somehow not showing up with the chip. The car had several issues with the chip that were gone with the SF tune. It had a rough idle, bucking on decel, erratic A/F, and never was smooth enough for cruise control. All of those issues disappeared and the A/F was nearly level at 11.8 - 12.3, I did one mod which included a global spark and fuel adjustment and all is well. It now produces 480rwhp 512rwtq on 6psi. Keep in mind the motor had the CR raised to 10.5 and the cams installed are not meant for any power adder, the built motor will get 9 psi from the beginning.

I know this is a long post but I've been seeing threads on numerous sites that have folks making comments on the various tuners but with no experience using them. I have used them and have included the results. I don't work for any shop, vendor, or manufacturer and have tons of posts on several other sites. I'm not here that often so if you have questions email would be best.

Geoff

[2002BLGT]

If anybody has any other questions about Sniper Products / email me at dirtydirtyracing@yahoo

[Juggalo_X]

Originally Posted by 2002BLGT If anybody has any other questions about Sniper Products / email me at dirtydirtyracing@yahoo

This guy is a licensed Sniper Re-Distributor I can vouch for him guys. He is working with snipers pro package the Commando software which i will be moving up to soon as i get the Sniper A/F Monitor :wink so i will be on that band wagon soon as well. Just wanted to thank you guys on behalf of Sniper, Chris has told me there have been many Guys here who have got the sniper package. Hope you all enjoy and me as well as the @ gentleman who has posted before me (the post above this one) Are here if you have any questions.

[2002BLGT]

Originally Posted by Juggalo_X Originally Posted by 2002BLGT If anybody has any other questions about Sniper Products / email me at dirtydirtyracing@yahoo This guy is a licensed Sniper Re-Distributor I can vouch for him guys. He is working with snipers pro package the Commando software which i will be moving up to soon as i get the Sniper A/F Monitor :wink so i will be on that band wagon soon as well. Just wanted to thank you guys on behalf of Sniper, Chris has told me there have been many Guys here who have got the sniper package. Hope you all enjoy and me as well as the @ gentleman who has posted before me (the post above this one) Are here if you have any questions.

Thanks I look forward to getting some emails about the Sniper Products , and the guys here can check out my website as well

[Juggalo_X]

Originally Posted by 2002BLGT Originally Posted by Juggalo_X Originally Posted by 2002BLGT If anybody has any other questions about Sniper Products / email me at dirtydirtyracing@yahoo This guy is a licensed Sniper Re-Distributor I can vouch for him guys. He is working with snipers pro package the Commando software which i will be moving up to soon as i get the Sniper A/F Monitor :wink so i will be on that band wagon soon as well. Just wanted to thank you guys on behalf of Sniper, Chris has told me there have been many Guys here who have got the sniper package. Hope you all enjoy and me as well as the @ gentleman who has posted before me (the post above this one) Are here if you have any questions. Thanks I look forward to getting some emails about the Sniper Products , and the guys here can check out my website as well

good read on the history of sniper and how they even made SCT what they are now :wink y'all don't beleive me Sniper is THE ORIGINAL. Very good read. http://dirtydirtyracing.com

[Juggalo_X]

here is a demo Video i made me me going through the sniper software to write a tune. shows you all the options that are available to my car at least Available for download compresses to about 650k or here is a stream link http://www.youtube.com/watch?v=WiQHoa6zQ8c but the download is better cuz u can read the setting in the program.

[blakeasaurusrex]

Sniper is excellent I own one and I've known the people who developed it for over 6 years now. They are the greatest people to know, they will help you with ANYTHING and always have the time to answer any question. They are about 15 mins from me down the road and i can get information for anyone or any business if anyone wants it.

I'd recommend it to anyone over anything else.

[GTNorm]

I live near sniper tunes and have had them dyno my car there. Patrick did mine and was a really cool guy to work with...he took the time to show me what he was changing and tried different things and made good reccomendations what to do next. I was impressed how quick it flashed the computer, no more than 10 or 20 seconds I'd say. My dodge diesel diablo predator takes every bit of 8 minutes to change programs.

[Juggalo_X]

Recon Data logger is now officially released so any one who has purchased an interface get in contact with chris @ sales@snipertuning.com and he will advise you as to how you can get your free Sniper recon upgrade. every one with an interface is eligible and any new buyers get it with the interface for free.

[Juggalo_X]

Bump

[Juggalo_X]

bump

[mutabi]

Thanks for your private PM reply Juggalo_X.

Alrighty, I really like the idea of the sniper tuner. Me and a buddy are going halves on it so we can tune our two mustangs (he has a mach1 the b$#%@!d).

We also have some other friends with mustangs. The price for an extra bullet is somewhere between $200 and $250 which allows you to add another car. Allows someone to tune their car fully, without spending $400 on a handheld. But can we do better?

I found this link: http://www.precisionperformancetunin...et_p/bu200.htm

Its a bullet for $150. Juggalo_X is this the bullet that we would need? $150 is a whole lot better than $200 or $250.

Anyone have an even better price somewhere?