ash tray switch plate

ZoomZoomMFer · October 17th, 2008, 05:52 PM

here are a few pics of my progress... still needs a little trimming, but it fits pretty well...

still dont know what switches to put in it...

and am probably gonna have it powder-coated, so it wont get scratched..
but if it ends up looking pretty good, ill probably make a few to sell as well

95opal · October 17th, 2008, 06:14 PM

Nice work 98SilverStang, I did the same thing. Mounted my nitrous purge button there, although this winter I will be moving the rest of my nitrous switches into the ashtray. That means I get to make a new one yeah.

Not a good pic but here it is.

ZoomZoomMFer · October 17th, 2008, 06:20 PM

i did mine with like 1/16" aluminum.

thats probably gonna be where i put the purge and heater switch at.

opal... looks amazing once again

95opal · October 17th, 2008, 06:30 PM

Originally Posted by 98SilverStang

i did mine with like 1/16" aluminum.

thats probably gonna be where i put the purge and heater switch at.

opal... looks amazing once again

Yeah I used the same thing, just painted it and cleared. This time I think I will do something a little different, just not set in stone yet, but with winter coming I will have some time to finalize a plan as Most of the interior will be pulled for a little custom work. I was thinking on the lines of a brushed aluminum finish IDK. Get some pics of the finished product when its installed as Im quit interested to see.

ZoomZoomMFer · October 17th, 2008, 06:51 PM

you got it man... havent decided on a color for powder coat yet..

i think im gonna put all the nitrous switched in that...heater, arm, and purge

will any switches work? or are there certain kinds.

acmillr · October 17th, 2008, 06:58 PM

Put a master switch, a heater switch, and an arming switch. That should wrap it up.

ZoomZoomMFer · October 17th, 2008, 07:03 PM

would i need a purge button?

they can be any switches right?
i can get them from autozone?

acmillr · October 17th, 2008, 07:04 PM

Autoone is good. I personally don't see a reason to run a purge for most uses, but that is up to you.

ZoomZoomMFer · October 17th, 2008, 08:02 PM

ok now i got three switches and just have to get a button for purge..

rk_2000_Z/28 · October 17th, 2008, 09:22 PM

What's that for?

rk_2000_Z/28 · October 17th, 2008, 09:24 PM

Originally Posted by 98SilverStang

would i need a purge button?

they can be any switches right?
i can get them from autozone?

you dont have to have a purge unless you are looking for real consistant track times. For just playing on the street or screwing around you are fine without one.

ZoomZoomMFer · October 17th, 2008, 09:31 PM

but purge is so awesome...lol

rk_2000_Z/28 · October 17th, 2008, 09:45 PM

Originally Posted by 98SilverStang

but purge is so awesome...lol

I know. There were so many times in my SS that I wish I had it just to fuck with people. But that's a real quick way to waste the dope.

ZoomZoomMFer · October 17th, 2008, 10:12 PM

true that... heres a quick pic of it with the switches.. mind you this will be powdercoated.. probably black

TheUNZippee! · October 18th, 2008, 12:30 PM

Looking good man.

06GTMustang89 · October 18th, 2008, 02:47 PM

looking real good i just helped my buddy last night hook up his zex kit in his 03 GT....we tested it out and he got a little shook up cuz we were sideways in each gear..no traction at all....

October 17th, 2008, 05:52 PM	#1
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	ash tray switch plate here are a few pics of my progress... still needs a little trimming, but it fits pretty well... still dont know what switches to put in it... and am probably gonna have it powder-coated, so it wont get scratched.. but if it ends up looking pretty good, ill probably make a few to sell as well __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 06:14 PM	#2
95opal Hardcore Enthusiast 95 opalfrost gt Join Date: Nov 2006 Location: Connecticut Posts: 1,470 iTrader: 0 reviews	Nice work 98SilverStang, I did the same thing. Mounted my nitrous purge button there, although this winter I will be moving the rest of my nitrous switches into the ashtray. That means I get to make a new one yeah. Not a good pic but here it is. __________________ 5.0 magazines 94-04 performance mustangs feature car! Fall 2010

October 17th, 2008, 06:20 PM	#3
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	i did mine with like 1/16" aluminum. thats probably gonna be where i put the purge and heater switch at. opal... looks amazing once again __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 06:51 PM	#5
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	you got it man... havent decided on a color for powder coat yet.. i think im gonna put all the nitrous switched in that...heater, arm, and purge will any switches work? or are there certain kinds. __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 06:58 PM	#6
acmillr MM's Mad Scientist Slow Fella Join Date: Jul 2006 Location: Tupelo, MS Posts: 5,120 iTrader: 2 reviews	Put a master switch, a heater switch, and an arming switch. That should wrap it up. __________________

October 17th, 2008, 07:03 PM	#7
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	would i need a purge button? they can be any switches right? i can get them from autozone? __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 07:04 PM	#8
acmillr MM's Mad Scientist Slow Fella Join Date: Jul 2006 Location: Tupelo, MS Posts: 5,120 iTrader: 2 reviews	Autoone is good. I personally don't see a reason to run a purge for most uses, but that is up to you. __________________

October 17th, 2008, 08:02 PM	#9
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	ok now i got three switches and just have to get a button for purge.. __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 09:22 PM	#10
rk_2000_Z/28 Forever in our hearts travis_afx 2003 SVT Cobra Join Date: Apr 2007 Location: Enid, OK Posts: 4,186 iTrader: 0 reviews	What's that for? __________________ 03 Cobra-Slow 02 SS, 00 Z/28-Gone Rest In Peace Travis Billings

October 17th, 2008, 09:31 PM	#12
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	but purge is so awesome...lol __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 17th, 2008, 10:12 PM	#14
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	true that... heres a quick pic of it with the switches.. mind you this will be powdercoated.. probably black __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

October 18th, 2008, 12:30 PM	#15
TheUNZippee! Moderator Join Date: Jan 2007 Location: Canada Posts: 61,816 Blog Entries: 1 iTrader: 0 reviews	Looking good man. __________________

October 18th, 2008, 02:47 PM	#16
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	looking real good i just helped my buddy last night hook up his zex kit in his 03 GT....we tested it out and he got a little shook up cuz we were sideways in each gear..no traction at all.... __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: ash tray switch plate
Thread	Thread Starter	Forum	Replies	Last Post
ash tray switch plate	ZoomZoomMFer	The Clubhouse	2	October 17th, 2008 04:09 PM
ash tray switch panel...	1FastFox	5.0 Mustangs	8	May 16th, 2008 05:17 PM
how do i get the headlight switch, high beam switch, emergency switch etc out?	91cobra5.0	5.0 Mustangs	0	March 19th, 2008 10:39 PM
Windage Tray	poisonstallion95gt	94-95	3	November 17th, 2007 02:09 AM
Windage Tray	1stimeford	99-04	3	May 19th, 2007 05:14 AM

All times are GMT -4. The time now is 06:14 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.