Procharger Questions

Molitor · June 25th, 2009, 10:55 AM

I bought a Procharger, P1SC with intercooler, for my 2004 Mustang Mach 1. It has the 4.6L V8 DOHC, with this Procharger I understood that it was a bolt on kit and it works with no other side upgrades to make it work. I know it will work better with a tune but is that required for my car to run properly. I plan on getting it tuned next year after my Iraq tour. I plan to install the Procharger on my two week leave back to the states and was wondering if there were any other things I need to get so I can just install and have it working in a day or so. Some people (like 2-3) said I WILL need a different Mass Air Flow Sensor and that my stock one will not work because it will “peg” out. Also that I may need a different type of spark plugs. If I do get a new one of those then I will mostly likely NEED a tune right away. I only have a short time back home before I need to come back so if you could please tell me what installing this in tales in what other parts I may need so I can have them ordered before I get home that would be amazing, thanks guys…. I need any help I can get.....

dblzroracin · June 26th, 2009, 09:24 AM

You will need a tune after the procharger install so I would find a good tuner preferably one with a dyno & talk with them before buying anything else to see what they reccomend for their tunes. Some use different brands of programers and MAf sensors & so forth. You may need to upgrade the injectors & fuel pump also.

03_StangGuy · June 26th, 2009, 10:27 AM

If you run the stock pulley your MAF will be fine. The stock MAF is good to about 400hp. You will need new injectors but you should get some with your kit. Anytime you adust the air or fuel going into your car as much as you be you NEED a tune. If you dont tune it your engine WILL blow up.

Molitor · June 27th, 2009, 01:01 AM

yeah thats what I found out, the kit I bout didnt have a ECM tunner\reprogramer, so thats all I need to buy as for parts, the kit has everything else, Then I'll in install everything, trailer to a Dyno place and have it tuned with a new MFA on it too.

~C~ · July 27th, 2009, 10:34 AM

Fuel pump 255L min
Plugs (one degree cooler)
MAF (90mm min)
Injectors (42lb ideal)

Bene · July 31st, 2009, 01:59 PM

what if you use a Maf.ia from Diablosport? How does that work?

~C~ · August 3rd, 2009, 12:00 PM

I think they will work fine. Heard of a lot of guys using a Mafia. I think they peg out at like 5500 rpms or something. I bought the SCT 2600 to be sure. It was pricey, but piece of mind on that side of the house is worth it imo.

June 25th, 2009, 10:55 AM	#1
Molitor Enthusiast 2004 Mustang Mach 1 1994 Dodge Ram 5.9L 4WD 2010 IQ Shift 600 Join Date: Oct 2008 Location: Winona, Minnesota Posts: 796	Procharger Questions I bought a Procharger, P1SC with intercooler, for my 2004 Mustang Mach 1. It has the 4.6L V8 DOHC, with this Procharger I understood that it was a bolt on kit and it works with no other side upgrades to make it work. I know it will work better with a tune but is that required for my car to run properly. I plan on getting it tuned next year after my Iraq tour. I plan to install the Procharger on my two week leave back to the states and was wondering if there were any other things I need to get so I can just install and have it working in a day or so. Some people (like 2-3) said I WILL need a different Mass Air Flow Sensor and that my stock one will not work because it will “peg” out. Also that I may need a different type of spark plugs. If I do get a new one of those then I will mostly likely NEED a tune right away. I only have a short time back home before I need to come back so if you could please tell me what installing this in tales in what other parts I may need so I can have them ordered before I get home that would be amazing, thanks guys…. I need any help I can get..... __________________ http://www.moddedmustangs.com/forums...ml#post2574219 ^PLAY AND WIN!^ Military Crew MM Sapper Squad Zombie Killing Club Member #4 Black Stang Crew Member #5

June 26th, 2009, 09:24 AM	#2
dblzroracin Regular Join Date: Aug 2005 Location: Memphis, TN Posts: 102	You will need a tune after the procharger install so I would find a good tuner preferably one with a dyno & talk with them before buying anything else to see what they reccomend for their tunes. Some use different brands of programers and MAf sensors & so forth. You may need to upgrade the injectors & fuel pump also. __________________ www.bbandtracing.com

June 27th, 2009, 01:01 AM	#4
Molitor Enthusiast 2004 Mustang Mach 1 1994 Dodge Ram 5.9L 4WD 2010 IQ Shift 600 Join Date: Oct 2008 Location: Winona, Minnesota Posts: 796	yeah thats what I found out, the kit I bout didnt have a ECM tunner\reprogramer, so thats all I need to buy as for parts, the kit has everything else, Then I'll in install everything, trailer to a Dyno place and have it tuned with a new MFA on it too. __________________ http://www.moddedmustangs.com/forums...ml#post2574219 ^PLAY AND WIN!^ Military Crew MM Sapper Squad Zombie Killing Club Member #4 Black Stang Crew Member #5

July 27th, 2009, 10:34 AM	#5
~C~ ~C~, The Other White Meat! Y2K YellowJacket GT ~TBD~ Join Date: Jun 2008 Location: West side B-More Posts: 1,710	Fuel pump 255L min Plugs (one degree cooler) MAF (90mm min) Injectors (42lb ideal) __________________ BLOWN Bumblebeast! 370 rwhp / 381 ft lbs ~Tuned by JJ at WMS "Like the blind man says......We shall see...."

August 3rd, 2009, 12:00 PM	#7
~C~ ~C~, The Other White Meat! Y2K YellowJacket GT ~TBD~ Join Date: Jun 2008 Location: West side B-More Posts: 1,710	I think they will work fine. Heard of a lot of guys using a Mafia. I think they peg out at like 5500 rpms or something. I bought the SCT 2600 to be sure. It was pricey, but piece of mind on that side of the house is worth it imo. __________________ BLOWN Bumblebeast! 370 rwhp / 381 ft lbs ~Tuned by JJ at WMS "Like the blind man says......We shall see...."

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 31st, 2009, 01:59 PM	#6
Bene Newbie 2004 Mach 1 Join Date: Jan 2009 Posts: 13	what if you use a Maf.ia from Diablosport? How does that work?

Threads Similar to: Procharger Questions
Thread	Thread Starter	Forum	Replies	Last Post
Procharger Install Questions	dcook_14	99-04	48	July 1st, 2009 07:29 PM
Procharger Install Questions	dcook_14	99-04	7	June 18th, 2009 12:37 PM
Procharger questions	retro_stang	4.0L 2005+	4	April 8th, 2009 07:21 PM
Procharger Questions	MATT02GT	99-04	12	September 27th, 2007 10:36 PM
Procharger Questions	hawks05	99-04	5	March 6th, 2007 11:26 PM

All times are GMT -4. The time now is 02:26 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2010, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.