2v support how much power?

So_calpsycho · October 7th, 2009, 04:30 AM

anyone tested or experienced with Procharger? or how much you can get with a 10 psi on a 2v?

03SuperchargedGT · October 17th, 2009, 12:00 AM

honestly there will never be a solid answer to that question. some people have ran over 400rwhp and survived for ages and some people have ran under that and have there car blow up rather quickly. Its all gonna depend on the tune, how hard you push the car on a daily basis, and of course a little bit of luck. for the most part i think you will have better luck if you stay between the 350-380rwhp on stock internals

mustanginky · October 17th, 2009, 12:38 AM

i'm hitting 368 hp on 7 lbs. 10 lbs would likely put me around 400 or so.

SWEET2KSTANG · October 17th, 2009, 02:46 AM

10psi is doable. these motors will go 400rwhp+ but it comes down to set up, tune, etc. do everything right, and these motors will take quiet a bit and be trouble free.

Trick Tuners · October 17th, 2009, 11:13 AM

I'm getting close to 20K mi with 9psi on the stock guts.

~C~ · October 19th, 2009, 03:57 PM

Originally Posted by 03SuperchargedGT

honestly there will never be a solid answer to that question. some people have ran over 400rwhp and survived for ages and some people have ran under that and have there car blow up rather quickly. Its all gonna depend on the tune, how hard you push the car on a daily basis, and of course a little bit of luck. for the most part i think you will have better luck if you stay between the 350-380rwhp on stock internals

I slid right in there!

Originally Posted by mustanginky

i'm hitting 368 hp on 7 lbs. 10 lbs would likely put me around 400 or so.

Yep, im hitting just above that on about 6-8. I would like to get to 400 on 10lbs. I want to swap pulleys and retune for my mid pipe and see where im at.

blackedoutaddition · October 21st, 2009, 06:17 PM

when my car was tuned it was making 7psi 418hp 404tq
makes bout 10psi now but have yet to get back on the dyno

~C~ · November 11th, 2009, 08:50 AM

You're cammed though.

October 7th, 2009, 04:30 AM	#1
So_calpsycho Regular 2001 GT BULLITT Join Date: Apr 2008 Location: Orange County (Lake Forest) Posts: 131	2v support how much power? anyone tested or experienced with Procharger? or how much you can get with a 10 psi on a 2v?

October 17th, 2009, 12:00 AM	#2
03SuperchargedGT Enthusiast 2003 Mustang GT Join Date: Jul 2008 Location: Vancouver,BC Posts: 707	honestly there will never be a solid answer to that question. some people have ran over 400rwhp and survived for ages and some people have ran under that and have there car blow up rather quickly. Its all gonna depend on the tune, how hard you push the car on a daily basis, and of course a little bit of luck. for the most part i think you will have better luck if you stay between the 350-380rwhp on stock internals __________________ 2003 Mustang GT See Garage for mod list....360RWHP, 360RWTQ

October 17th, 2009, 12:38 AM	#3
mustanginky Enthusiast 2000 gt Join Date: Feb 2009 Location: La grange, KY Posts: 963	i'm hitting 368 hp on 7 lbs. 10 lbs would likely put me around 400 or so. __________________ Procharged 2000 5 Speed BAB GT, 7.3 lbs, 368 hp, 406 rwtq. HARDCORE CREW

October 17th, 2009, 02:46 AM	#4
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 Join Date: Oct 2006 Location: N.W. AR Posts: 8,987	10psi is doable. these motors will go 400rwhp+ but it comes down to set up, tune, etc. do everything right, and these motors will take quiet a bit and be trouble free. __________________ right now, she is a jackstand warrior if the car was a horse, i would shoot it!!! project warhorse under construction

October 17th, 2009, 11:13 AM	#5
Trick Tuners Hardcore Enthusiast KB'd GT Join Date: Nov 2006 Location: San Diego Posts: 2,436	I'm getting close to 20K mi with 9psi on the stock guts. __________________ SCT Tuning, JLT intakes, Aeroforce OBDII gauges and PLX wideband products @ Trick Tuners My forums Xcal3 SF with preloaded tunes and free custom tunes for life for $379 shipped. Custom tunes based on actual data is extra.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

October 21st, 2009, 06:17 PM	#7
blackedoutaddition Regular 2004 GT 11.68@122 Join Date: Apr 2009 Location: MA Posts: 65	when my car was tuned it was making 7psi 418hp 404tq makes bout 10psi now but have yet to get back on the dyno

November 11th, 2009, 08:50 AM	#8
~C~ ~C~, The Other White Meat! Y2K YellowJacket GT ~TBD~ Join Date: Jun 2008 Location: West side B-More Posts: 1,601	You're cammed though. __________________ BLOWN Bumblebeast! 370 rwhp / 381 ft lbs ~Tuned by JJ at WMS "Like the blind man says......We shall see...."

Threads Similar to: 2v support how much power?
Thread	Thread Starter	Forum	Replies	Last Post
Need Some Serious Support	beefmobile	The Clubhouse	200	June 9th, 2009 01:56 AM
Please Support One Of Our Own	e3sean	The Clubhouse	16	September 22nd, 2008 12:35 AM
Thanks MM for the support once again	Youngin	The Clubhouse	14	September 19th, 2008 01:30 AM
no support....	minigunner7point62	V6 Mustangs	14	August 27th, 2008 12:55 AM
I need support and laughter.. :(	El_Cangri	The Clubhouse	26	March 13th, 2008 01:57 AM

All times are GMT -4. The time now is 12:04 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.