Want to do a turbo build need some info

xtremes10 · October 30th, 2009, 07:06 PM

Hey guys, I am getting ready to get rid of my drag truck for something a little more wild. I want to build a streetable turbo/twin turbo 10.5 car. I want it to be a 99-01 cobra body, and well the end goal is to push over 1000rwhp. I have the transmission covered. So my question is, what block should I go with? Should I go with twins or single? What heads? Crank and pistons?

I'm not much of a FI guy as of yet, still learning that end of it. I am budgeting $10-15,000 for the motor build alone, so I want to make sure that will hold out for what I want to do. I'm open to suggestions.

uedlose · November 9th, 2009, 07:54 PM

What engine are you gone with a Mod motor or a push rod engine? its doable with either. as far as twins or a single whats the rule book say for the class you want to run? A lot of the heads up class around here don't allow twins and even some of the singles are size limited

October 30th, 2009, 07:06 PM	#1
xtremes10 Enthusiast 2008 Shelby GT500 12.20@122 Join Date: Apr 2009 Location: Butler, PA Posts: 542	Want to do a turbo build need some info Hey guys, I am getting ready to get rid of my drag truck for something a little more wild. I want to build a streetable turbo/twin turbo 10.5 car. I want it to be a 99-01 cobra body, and well the end goal is to push over 1000rwhp. I have the transmission covered. So my question is, what block should I go with? Should I go with twins or single? What heads? Crank and pistons? I'm not much of a FI guy as of yet, still learning that end of it. I am budgeting $10-15,000 for the motor build alone, so I want to make sure that will hold out for what I want to do. I'm open to suggestions. __________________ MM Cobra Club #27 MMCC's Most Hated 2008 Shelby Cobra- FRPP CAI, Bassani Race Axle-backs, BMR LCA's, Eibach Pro Kit, BMR Adjustable panhard bar Metco 2.6" Pulley, OR X pipe, 18" CCW SP550's Hellion Twin Turbo build in the works

November 9th, 2009, 07:54 PM	#2
uedlose Regular 89 Mustang Join Date: Oct 2008 Location: Middle Way WV Posts: 91	What engine are you gone with a Mod motor or a push rod engine? its doable with either. as far as twins or a single whats the rule book say for the class you want to run? A lot of the heads up class around here don't allow twins and even some of the singles are size limited __________________ just another ten sec. Mustang turbo baby just outside the nines... still only 306 CID

Threads Similar to: Want to do a turbo build need some info
Thread	Thread Starter	Forum	Replies	Last Post
Turbo info plz	Texas01GT	99-04	28	May 11th, 2009 09:51 PM
My turbo build	98 cobra	4V / SVT	5	June 16th, 2008 01:19 AM
pics and info about my build	Iownastang	The Clubhouse	2	February 10th, 2008 09:16 PM
Turbo Info	707Stang	V6 Mustangs	33	November 12th, 2007 02:11 AM
i need some info on v6 and turbo	ryans69mustang	V6 Mustangs	1	March 28th, 2007 02:02 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

All times are GMT -4. The time now is 08:50 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.