FS: Kenne Bell 2.1L IC s/c kit

bbk03gt24 · August 11th, 2009, 10:16 AM

For those of you that remember my last post, I have finally come to the conclusion that I am most definitely selling my Kenne Bell 2.1L IC supercharger kit. I am more than sorry for not being more attentive to anyone that sent me an inquiry over it (overall, I think that there were a few that I talked to about it), but I had literally just started a new job, which to say the least has been very demanding—more so that I expected anyway—and I also have been dealing with some pretty f’d up personal issues. Nevertheless, I’m now ready to sell it and I wanted to let everyone know that it is on the market. For details, read the following:

I’m looking to get $3,750 for the whole kit + shipping (of no more than $150 [in other words, if it costs $50 bucks to ship then shipping will be $50]). Before everyone starts to freak out though, that price includes the following:

1. Billet BIG BORE Twin Screw 2.1L Supercharger
2. Hi-Flo Inlet Manifolds
3. Billet Bypass Valve Assembly
4. Bar and Plate Intercooler ("Intercooled" kit only)
5. HD Heat Exchanger ("Intercooled" kit only)
6. Intercooler Pump ("Intercooled" kit only)
7. Water Fill Reservoir ("Intercooled" kit only)
8. Re-calibrated Mono-chip
9. 36lb Injectors
10. BOOST-A-PUMP™
11. Fuel Rails ('96-'00)--NOT INCLUDED SINCE MY CAR WAS AN '03
12. 160° Calibrated Thermostat
13. 90mm MAF
14. JLT Ram Air Intake (BLACK)
15. BBK 75mm Throttle Body
16. Phantom Electric Fuel Pressure gauge, boost gauge, and a triple pillar gauge pod

The 90mm maf, jlt rai, bbk tb, and gauges and gauge pod are all included just as stated. If you do not want the intake or throttle body, I will reduce the price to $3,600 + shipping. If you do want the intake & tb tho, you'll be getting both of them for $150--the intake only has 1500 miles on it & the tb has more, but is in superb condition. I truly feel like that’s a pretty fair price (those of you who want to take on the arbitrary role(s) please chime in and let me know if you agree) since it is everything you need—with the exception of a custom tune—to get your car blown. The Mono-chip with my 422 rwhp/425 rwtq settings will be included with the kit, but if I were you, I would most definitely get the chip tuned to fit your car specifically. In addition, everything listed has 1,500 miles total use on it.

As of today, everything is still on my car; however, at the end of this week, everything will be taken off and ready to be shipped out by the beginning of next week. Since its all still on the car, the pics that I have taken thus far consist of it being on my car:

For all of you that are interested, pm me or shoot me an e-mail at benjaminkimrey@yahoo.com. Also, I posted it here to ask those of you who are not interested whether this is a reasonable price for everything listed—I most definitely feel like it is, but I would like to hear other opinions as well. I will have a vid of it on the car up before everything gets taken off on thursday so keep a close watch...

(I originally posted this in the wrong section... sorry mods!)

03gtfirered · August 11th, 2009, 03:02 PM

damn i would def jump on this but unfortunately i am in school. good luck with sale. i think its a good price.

bbk03gt24 · August 11th, 2009, 07:11 PM

i forgot to mention that i bought this kit from ModularPowerhouse in Cartersville, GA. Don't quote me 100% on this, but I think that if you were to have this installed there, you would actually get the same warranty that I am currently under from their shop.

GreyWarrior07 · August 11th, 2009, 09:18 PM

you should sell it to me next summer

bbk03gt24 · August 11th, 2009, 09:58 PM

Originally Posted by 03gtfirered

damn i would def jump on this but unfortunately i am in school. good luck with sale. i think its a good price.

hey that's what student loans are for man lol

ChrisJ · August 12th, 2009, 06:48 PM

If I didnt have my vortech I would be on this...

Tim will also burn tunes for his kits for $250...Not sure about the warranty part though...

1tufgt · August 12th, 2009, 06:58 PM

Damn that's one hell of a deal............

bbk03gt24 · August 12th, 2009, 07:38 PM

Originally Posted by ChrisJ

If I didnt have my vortech I would be on this...

Tim will also burn tunes for his kits for $250...Not sure about the warranty part though...

that's prob what I was thinkin about... i had heard that you got some type of special deal or somethin if you bought a kit from them--even if it was used.

Originally Posted by 1tufgt

Damn that's one hell of a deal............

& thanks for the feedback man... hopefully somebody that's lookin for one will think so soon as well lol

bbk03gt24 · August 14th, 2009, 02:18 PM

thought that I might post the vid of it here for all of you who are interested...

YouTube - Kenne Bell 2.1L

LAWNDART02 · August 14th, 2009, 03:38 PM

PM/d

bbk03gt24 · August 14th, 2009, 10:00 PM

Originally Posted by LAWNDART02

PM/d

I got it & I just replied to it as well

tmoney78 · August 15th, 2009, 11:26 AM

Hi,
do you know if theat would fit a 98 mustang Gt 4.6 auto?
i'm in the market for a blower.
thanks

hollagraphik · August 15th, 2009, 01:05 PM

pm sent.

FX4DTUF · August 15th, 2009, 01:11 PM

this would be sick on my truck

hmmmmm

MSGT281 · August 16th, 2009, 05:21 PM

Been looking for a used KB for months. Have a built 283 with head and cams begging for a twin screw. Would like to talk more about this kit. Praying this thing is still for sale.

bbk03gt24 · August 16th, 2009, 08:23 PM

Originally Posted by tmoney78

Hi,
do you know if theat would fit a 98 mustang Gt 4.6 auto?
i'm in the market for a blower.
thanks

I don't think so, but i'm not 100% sure... i looked on kenne bell's web site & it says that the kit that i bought is for 99-04s... you might be able to make it work tho... for those of you that know if this is true or not, please chime in...

Originally Posted by MSGT281

Been looking for a used KB for months. Have a built 283 with head and cams begging for a twin screw. Would like to talk more about this kit. Praying this thing is still for sale.

i got your email & replied to it...

MSGT281 · August 16th, 2009, 08:41 PM

Originally Posted by bbk03gt24

I don't think so, but i'm not 100% sure... i looked on kenne bell's web site & it says that the kit that i bought is for 99-04s... you might be able to make it work tho... for those of you that know if this is true or not, please chime in...

i got your email & replied to it...

PM Sent..

BakerFX4 · August 17th, 2009, 12:58 AM

edit...

Dolbs4082 · August 17th, 2009, 04:01 PM

Dang dude, i really really really wish i could buy this, i just finished up a complete engine build, just begging for this kind of set up! im hoping that this winter i can sit down and order one. your price is amazing, from what i've been seeing, most go for a little more then this with prolly just a little bit less stuff. haha.

bbk03gt24 · August 17th, 2009, 08:37 PM

dont tell me stuff like that man lol... ur going to make me reconsider my asking price lol

August 11th, 2009, 10:16 AM	#1
bbk03gt24 Regular iTrader: 1 / 100% 2003 Mustang GT Join Date: Jul 2008 Location: Winston-Salem, NC Posts: 188	FS: Kenne Bell 2.1L IC s/c kit For those of you that remember my last post, I have finally come to the conclusion that I am most definitely selling my Kenne Bell 2.1L IC supercharger kit. I am more than sorry for not being more attentive to anyone that sent me an inquiry over it (overall, I think that there were a few that I talked to about it), but I had literally just started a new job, which to say the least has been very demanding—more so that I expected anyway—and I also have been dealing with some pretty f’d up personal issues. Nevertheless, I’m now ready to sell it and I wanted to let everyone know that it is on the market. For details, read the following: I’m looking to get $3,750 for the whole kit + shipping (of no more than $150 [in other words, if it costs $50 bucks to ship then shipping will be $50]). Before everyone starts to freak out though, that price includes the following: 1. Billet BIG BORE Twin Screw 2.1L Supercharger 2. Hi-Flo Inlet Manifolds 3. Billet Bypass Valve Assembly 4. Bar and Plate Intercooler ("Intercooled" kit only) 5. HD Heat Exchanger ("Intercooled" kit only) 6. Intercooler Pump ("Intercooled" kit only) 7. Water Fill Reservoir ("Intercooled" kit only) 8. Re-calibrated Mono-chip 9. 36lb Injectors 10. BOOST-A-PUMP™ 11. Fuel Rails ('96-'00)--NOT INCLUDED SINCE MY CAR WAS AN '03 12. 160° Calibrated Thermostat 13. 90mm MAF 14. JLT Ram Air Intake (BLACK) 15. BBK 75mm Throttle Body 16. Phantom Electric Fuel Pressure gauge, boost gauge, and a triple pillar gauge pod The 90mm maf, jlt rai, bbk tb, and gauges and gauge pod are all included just as stated. If you do not want the intake or throttle body, I will reduce the price to $3,600 + shipping. If you do want the intake & tb tho, you'll be getting both of them for $150--the intake only has 1500 miles on it & the tb has more, but is in superb condition. I truly feel like that’s a pretty fair price (those of you who want to take on the arbitrary role(s) please chime in and let me know if you agree) since it is everything you need—with the exception of a custom tune—to get your car blown. The Mono-chip with my 422 rwhp/425 rwtq settings will be included with the kit, but if I were you, I would most definitely get the chip tuned to fit your car specifically. In addition, everything listed has 1,500 miles total use on it. As of today, everything is still on my car; however, at the end of this week, everything will be taken off and ready to be shipped out by the beginning of next week. Since its all still on the car, the pics that I have taken thus far consist of it being on my car: For all of you that are interested, pm me or shoot me an e-mail at benjaminkimrey@yahoo.com. Also, I posted it here to ask those of you who are not interested whether this is a reasonable price for everything listed—I most definitely feel like it is, but I would like to hear other opinions as well. I will have a vid of it on the car up before everything gets taken off on thursday so keep a close watch... (I originally posted this in the wrong section... sorry mods!) __________________ Kenne Bell 2.1L JLT CAI 90mm MAF BBK 75mm TB Stock Internals, Stock Headers SLP X-pipe (w/ cats) SLP LM1 Cat-Backs 3.73s 422 rwhp, 425 rwtq (Tuned by Tim @ MPH) Last edited by bbk03gt24 : August 11th, 2009 at 07:05 PM.

August 11th, 2009, 07:11 PM	#3
bbk03gt24 Regular iTrader: 1 / 100% 2003 Mustang GT Join Date: Jul 2008 Location: Winston-Salem, NC Posts: 188	i forgot to mention that i bought this kit from ModularPowerhouse in Cartersville, GA. Don't quote me 100% on this, but I think that if you were to have this installed there, you would actually get the same warranty that I am currently under from their shop. __________________ Kenne Bell 2.1L JLT CAI 90mm MAF BBK 75mm TB Stock Internals, Stock Headers SLP X-pipe (w/ cats) SLP LM1 Cat-Backs 3.73s 422 rwhp, 425 rwtq (Tuned by Tim @ MPH)

August 11th, 2009, 09:18 PM	#4
GreyWarrior07 Regular iTrader: 0 / 0% 2001 Mustang GT 13.8 Join Date: Aug 2008 Location: North Branch Posts: 224	you should sell it to me next summer __________________ Bassani Hi Flow Catted X pipe K/N Cold Air Intake Dynomax Cat Back Spec 2 Clutch

August 12th, 2009, 06:48 PM	#6
ChrisJ "Slow Ass Car" iTrader: 8 / 100% 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Louisville, Kentucky Posts: 19,714	If I didnt have my vortech I would be on this... Tim will also burn tunes for his kits for $250...Not sure about the warranty part though... __________________ www.myspace.com/cjobe

August 14th, 2009, 03:38 PM	#10
LAWNDART02 Regular iTrader: 0 / 0% 02 GT Join Date: Aug 2008 Location: Detroit Posts: 92	PM/d __________________ 02 2v 5sp

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 12th, 2009, 06:58 PM	#7
1tufgt Regular iTrader: 0 / 0% Join Date: Mar 2009 Location: Louisville, KY Posts: 275	Damn that's one hell of a deal............

August 15th, 2009, 11:26 AM	#12
tmoney78 Regular iTrader: 0 / 0% 1998 Mustang Gt 4.6 v8 Join Date: May 2009 Location: Virginia Posts: 113	Hi, do you know if theat would fit a 98 mustang Gt 4.6 auto? i'm in the market for a blower. thanks __________________ 4.6 custom Plenum ported K&N Air Intake 75mm throttle Body Bassani X pipes 40's Flowmaster 18" Axis Blck and Chrome

August 15th, 2009, 01:05 PM	#13
hollagraphik Regular iTrader: 0 / 0% 2004 Mustang GT Shake ñ Bake! Join Date: Mar 2009 Location: Chuck County FTW! Posts: 108	pm sent. __________________ 40th anniversary GT - MGW, K&N Intake, MAC Prochamber, Bassani Catback, March UDP, Mach 1 grille delete, 6k HIDs

August 15th, 2009, 01:11 PM	#14
FX4DTUF MM's Ford Truck Guy iTrader: 0 / 0% 2004 F-150 heritage does a nice burnout Join Date: Feb 2008 Location: Stafford, VA Posts: 1,283	this would be sick on my truck hmmmmm __________________ JAKE'S PIITB CREW MEMBER#3 HARDCORE CREW MM Truck Crew (Founder) MM Mach 1 Crew (Founder)

August 16th, 2009, 05:21 PM	#15
MSGT281 Newbie iTrader: 0 / 0% 2000 Mustang GT Join Date: Aug 2009 Location: San Jose, CA Posts: 5	Been looking for a used KB for months. Have a built 283 with head and cams begging for a twin screw. Would like to talk more about this kit. Praying this thing is still for sale. Last edited by MSGT281 : August 16th, 2009 at 05:24 PM.

August 17th, 2009, 12:58 AM	#18
BakerFX4 I Post Entirely Way Too Much iTrader: 7 / 100% Join Date: Dec 2007 Location: Louisiana Posts: 5,430	.... edit... __________________

August 17th, 2009, 04:01 PM	#19
Dolbs4082 Hardcore Enthusiast iTrader: 0 / 0% 2001 mustang steeda gt 13.4 Join Date: Dec 2008 Location: kansas Posts: 1,189	Dang dude, i really really really wish i could buy this, i just finished up a complete engine build, just begging for this kind of set up! im hoping that this winter i can sit down and order one. your price is amazing, from what i've been seeing, most go for a little more then this with prolly just a little bit less stuff. haha. __________________ 324.2 rwhp and 350.2 tq, on a conservative tune. Time for BOOOOOOST!!

August 17th, 2009, 08:37 PM	#20
bbk03gt24 Regular iTrader: 1 / 100% 2003 Mustang GT Join Date: Jul 2008 Location: Winston-Salem, NC Posts: 188	dont tell me stuff like that man lol... ur going to make me reconsider my asking price lol __________________ Kenne Bell 2.1L JLT CAI 90mm MAF BBK 75mm TB Stock Internals, Stock Headers SLP X-pipe (w/ cats) SLP LM1 Cat-Backs 3.73s 422 rwhp, 425 rwtq (Tuned by Tim @ MPH)

Threads Similar to: FS: Kenne Bell 2.1L IC s/c kit
Thread	Thread Starter	Forum	Replies	Last Post
Price on Kenne Bell Kit?	90Stang	4V / SVT	4	March 29th, 2009 02:57 AM
Kenne Bell Supercharger Kit	mmvi	Power Adders	7	December 5th, 2008 10:09 AM
Kenne Bell Tuner Kit (2.6L Currently) For 99-04 GT.	prodrifterx	Power Adders	3	February 22nd, 2008 10:34 PM

All times are GMT -4. The time now is 05:31 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.