96-98 Cobra Parts/ Vortech Setup

Blown96Mystic · January 30th, 2008, 10:21 PM

Up for sale is my previous setup. I just bought a Stage 3 HPTT kit and the vortech and supporting mods must go.

The only things needed besides what i have for sale are injectors, and a bypass/recirculation valve. I will throw in a powerpipe that is not a AFM one, but worked very well. Its not the prettiest thing, but it will get the job done.

The headunit has around 8K on it and the Aftercooler has less than 4k. It has always had a mixture of water wetter in it and it is exceptionally clean. Everything is in great condition and can be seen at my house or I can bring it to the corner.
Prices are listed, but offers will be highly considered.
If both the headunit and aftercooler are bought by the same person, I'll throw in the FMU, Inline pump, Aeromotive Regulator, and a Bypass or Blowoff Valve.

Headunit, bracket, custom stainless steel braided oil feed and drain lines, idlers, 13psi pulley and belt. -1800 OBO

Aftercooler, hoses, Heat Exchanger, pump with relay, and Polished Canton Water/Ice Reservoir -1500 OBO

8 Rib pulley kit, every pulley is new in box besides the Alt. pulley. Comes with Vortech spacers, idlers, and 1 new and 1 used 8 rib belt. -300 OBO

Turbo XS Type H-RFL billet blowoff valve with new s/s flange-100

Vortech FMU with S/S lines. I believe its a 8:1 step up ratio. -130

Aeromotive rail mounted regulator- 75

BBK Longtube Headers- 250

PRO-M 90mm MAF and Filter-150

[b]PICS[/B]
Here are some pics of the Custom Oil Lines...
http://i80.photobucket.com/albums/j1...3/PICT0327.jpg
http://i80.photobucket.com/albums/j1...3/PICT0328.jpg
http://i80.photobucket.com/albums/j1...3/PICT0326.jpg

Pics of the Headunit Installed on the Car.
http://i80.photobucket.com/albums/j1...3/PICT0318.jpg
http://i80.photobucket.com/albums/j1...3/PICT0320.jpg

Pics of the Pro-M 90mm Lightning Mass Air and Pro-M Filter
http://i80.photobucket.com/albums/j1...3/PICT0323.jpg

Pics of the Aftercooler and Reservoir, As you can see it is Immaculate inside and out!!!
http://i80.photobucket.com/albums/j1...3/PICT0321.jpg
http://i80.photobucket.com/albums/j1...3/PICT0316.jpg
http://i80.photobucket.com/albums/j1...3/PICT0314.jpg
http://i80.photobucket.com/albums/j1...3/PICT0313.jpg
http://i80.photobucket.com/albums/j1...3/PICT0312.jpg
http://i80.photobucket.com/albums/j1...3/PICT0311.jpg

Blown96Mystic · January 31st, 2008, 08:29 PM

Anyone interested? I have great feedback on Corral.net, SVTP...ect.

Blown96Mystic · February 6th, 2008, 10:36 PM

TTT 3K for everything minus 8 rib setup

97Cobra · February 7th, 2008, 01:33 AM

is everything included to have a complete install?

Blown96Mystic · February 7th, 2008, 10:43 PM

Yes it is. All you need to do is bend your A/C lines and get some hose to hook up the bypass valve. I have a Aluminum Bosch bypass for a much easier install than the Turbo XS one.

97Cobra · February 8th, 2008, 01:33 AM

hmmm was the 13lbs you ran safe on your engine? I know the safe spot is supposed to be at 8-10 for our cars...

Blown96Mystic · February 8th, 2008, 05:52 AM

I have ran as high as 18 on the dyno. I have a completely built motor.

97Cobra · February 8th, 2008, 06:05 AM

not all of us can be sooo lucky... lol

Blown96Mystic · February 9th, 2008, 06:38 PM

Anyone interested?

kennyGT · February 11th, 2008, 10:14 PM

bump for fellow FS member lol

car was fast with this set-up

Blown96Mystic · February 12th, 2008, 12:06 PM

Thanks Kenny. Yes car made 540WHP on 15psi.

Blown96Mystic · February 20th, 2008, 12:09 PM

TTT

96Snaker · February 20th, 2008, 08:10 PM

Out of curiosity, where are you located, Blown96?

Blown96Mystic · February 20th, 2008, 09:51 PM

Orlando, FL

January 30th, 2008, 10:21 PM	#1
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	96-98 Cobra Parts/ Vortech Setup Up for sale is my previous setup. I just bought a Stage 3 HPTT kit and the vortech and supporting mods must go. The only things needed besides what i have for sale are injectors, and a bypass/recirculation valve. I will throw in a powerpipe that is not a AFM one, but worked very well. Its not the prettiest thing, but it will get the job done. The headunit has around 8K on it and the Aftercooler has less than 4k. It has always had a mixture of water wetter in it and it is exceptionally clean. Everything is in great condition and can be seen at my house or I can bring it to the corner. Prices are listed, but offers will be highly considered. If both the headunit and aftercooler are bought by the same person, I'll throw in the FMU, Inline pump, Aeromotive Regulator, and a Bypass or Blowoff Valve. Headunit, bracket, custom stainless steel braided oil feed and drain lines, idlers, 13psi pulley and belt. -1800 OBO Aftercooler, hoses, Heat Exchanger, pump with relay, and Polished Canton Water/Ice Reservoir -1500 OBO 8 Rib pulley kit, every pulley is new in box besides the Alt. pulley. Comes with Vortech spacers, idlers, and 1 new and 1 used 8 rib belt. -300 OBO Turbo XS Type H-RFL billet blowoff valve with new s/s flange-100 Vortech FMU with S/S lines. I believe its a 8:1 step up ratio. -130 Aeromotive rail mounted regulator- 75 BBK Longtube Headers- 250 PRO-M 90mm MAF and Filter-150 [b]PICS[/B] Here are some pics of the Custom Oil Lines... http://i80.photobucket.com/albums/j1...3/PICT0327.jpg http://i80.photobucket.com/albums/j1...3/PICT0328.jpg http://i80.photobucket.com/albums/j1...3/PICT0326.jpg Pics of the Headunit Installed on the Car. http://i80.photobucket.com/albums/j1...3/PICT0318.jpg http://i80.photobucket.com/albums/j1...3/PICT0320.jpg Pics of the Pro-M 90mm Lightning Mass Air and Pro-M Filter http://i80.photobucket.com/albums/j1...3/PICT0323.jpg Pics of the Aftercooler and Reservoir, As you can see it is Immaculate inside and out!!! http://i80.photobucket.com/albums/j1...3/PICT0321.jpg http://i80.photobucket.com/albums/j1...3/PICT0316.jpg http://i80.photobucket.com/albums/j1...3/PICT0314.jpg http://i80.photobucket.com/albums/j1...3/PICT0313.jpg http://i80.photobucket.com/albums/j1...3/PICT0312.jpg http://i80.photobucket.com/albums/j1...3/PICT0311.jpg

February 7th, 2008, 01:33 AM	#4
97Cobra I Post Entirely Way Too Much iTrader: 1 / 100% 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Colorado Springs Posts: 6,561	is everything included to have a complete install? __________________ Modifications and pics in my Garage... Reps Appreciated!

February 8th, 2008, 01:33 AM	#6
97Cobra I Post Entirely Way Too Much iTrader: 1 / 100% 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Colorado Springs Posts: 6,561	hmmm was the 13lbs you ran safe on your engine? I know the safe spot is supposed to be at 8-10 for our cars... __________________ Modifications and pics in my Garage... Reps Appreciated!

February 8th, 2008, 06:05 AM	#8
97Cobra I Post Entirely Way Too Much iTrader: 1 / 100% 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Colorado Springs Posts: 6,561	not all of us can be sooo lucky... lol __________________ Modifications and pics in my Garage... Reps Appreciated!

February 11th, 2008, 10:14 PM	#10
kennyGT Enthusiast iTrader: 0 / 0% 2001 mustang GT 12.90@109.07 Join Date: May 2007 Location: Kissimmee, florida Posts: 700	bump for fellow FS member lol car was fast with this set-up __________________ 88 LX automatic-non stroked 302 with iron heads 01 GT manual-h-pipe bullets dumped-125shot 97 GT automatic-SOLD

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

January 31st, 2008, 08:29 PM	#2
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	Anyone interested? I have great feedback on Corral.net, SVTP...ect.

February 6th, 2008, 10:36 PM	#3
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	TTT 3K for everything minus 8 rib setup

February 7th, 2008, 10:43 PM	#5
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	Yes it is. All you need to do is bend your A/C lines and get some hose to hook up the bypass valve. I have a Aluminum Bosch bypass for a much easier install than the Turbo XS one.

February 8th, 2008, 05:52 AM	#7
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	I have ran as high as 18 on the dyno. I have a completely built motor.

February 9th, 2008, 06:38 PM	#9
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	Anyone interested?

February 12th, 2008, 12:06 PM	#11
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	Thanks Kenny. Yes car made 540WHP on 15psi.

February 20th, 2008, 12:09 PM	#12
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	TTT

February 20th, 2008, 09:51 PM	#14
Blown96Mystic Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 25	Orlando, FL

Threads Similar to: 96-98 Cobra Parts/ Vortech Setup
Thread	Thread Starter	Forum	Replies	Last Post
cobra expansion tank setup	zincsvtcobra	4V / SVT	7	February 3rd, 2008 10:29 PM
setup for 2003 cobra	2oo3c0bra	Exhaust	6	August 9th, 2007 09:58 PM
Cobra and other 4.6 parts fs	sleepinggt	For Sale	2	June 4th, 2007 04:06 PM
Cobra parts	sctravis77	Want to Buy	0	October 31st, 2006 04:35 AM
looking for some stock 96-99 cobra parts	daleboeski	Want to Buy	0	July 25th, 2006 04:02 PM

All times are GMT -4. The time now is 08:02 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2010, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.