Stiegemier Stage 3 Ported Eaton 03/04 Cobra

speedybolt · March 9th, 2008, 03:42 PM

I purchased a used ported Eaton for my cobra that I never installed. I now have a whipple so I need to sell this. I bought it used and this is a quote form the guy I bout it from " it has been a while but from what I can remember the guy that had it before me had 10k on it then got it ported and I bought it from him at that point then I think I put 8k on it while it was ported give or take some miles."

This also had a 2.8" interchangalbe upper on it.

Asking 575 shipped plus paypal 3% or M/O, cashiers check

Please email me at speeddemon1995@yahoo.com for a quicker response.

Thanks,
Billy

speedybolt · March 10th, 2008, 05:47 PM

I also have some pics of this blower. You can email me and I will get them to you.

Here is some information about the port job form Stiegemiers website;
Stage I-Inlet side port matched, exit side enlarged--$295.00 30+HP
Stage II-Inlet side port matched, internal radiusing, polished, exit side enlarged.--$395.00 40+HP
Stage III-Welded case, Inlet side Max ported and polished, exit side enlarged.--$495.00 50+HP
Stage IV-Welded case, Inlet side Max ported and polished, exit side enlarged-New Design that addresses Torque Loss -We are seeing 15+ rwhp peak Torque gain along with a top end Torque increase equal to the HP gain--$495.00 55+HP 15+Peak TQ

KingChronic · March 10th, 2008, 05:56 PM

damn this is a good deal

speedybolt · March 11th, 2008, 09:43 AM

Originally Posted by KingChronic

damn this is a good deal

Thanks, I paid alot more thatn that for it for sure. I just need to get rid of it now that I have my whipple!!!!

speedybolt · March 12th, 2008, 05:11 PM

I would also consider trading for 2- 17x10.5 Black Fr500's w/ drag radials with plenty of tread left on them.

speedybolt · March 13th, 2008, 03:10 PM

Ttt

ECUSVT31 · March 14th, 2008, 12:30 PM

awesome deal, too bad i only have a 99 cobra

speedybolt · March 14th, 2008, 01:17 PM

It's a good start to a conversion!!!

speedybolt · March 16th, 2008, 11:26 AM

Bump

speedybolt · March 19th, 2008, 06:38 PM

Ttt

speedybolt · March 25th, 2008, 01:19 PM

Ttt

speedybolt · March 31st, 2008, 04:34 PM

Bump

CobraKid90 · April 4th, 2008, 06:45 PM

were u from man?

March 9th, 2008, 03:42 PM	#1
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Stiegemier Stage 3 Ported Eaton 03/04 Cobra I purchased a used ported Eaton for my cobra that I never installed. I now have a whipple so I need to sell this. I bought it used and this is a quote form the guy I bout it from " it has been a while but from what I can remember the guy that had it before me had 10k on it then got it ported and I bought it from him at that point then I think I put 8k on it while it was ported give or take some miles." This also had a 2.8" interchangalbe upper on it. Asking 575 shipped plus paypal 3% or M/O, cashiers check Please email me at speeddemon1995@yahoo.com for a quicker response. Thanks, Billy __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 10th, 2008, 05:47 PM	#2
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	I also have some pics of this blower. You can email me and I will get them to you. Here is some information about the port job form Stiegemiers website; Stage I-Inlet side port matched, exit side enlarged--$295.00 30+HP Stage II-Inlet side port matched, internal radiusing, polished, exit side enlarged.--$395.00 40+HP Stage III-Welded case, Inlet side Max ported and polished, exit side enlarged.--$495.00 50+HP Stage IV-Welded case, Inlet side Max ported and polished, exit side enlarged-New Design that addresses Torque Loss -We are seeing 15+ rwhp peak Torque gain along with a top end Torque increase equal to the HP gain--$495.00 55+HP 15+Peak TQ __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID Last edited by speedybolt : March 10th, 2008 at 05:50 PM.

March 10th, 2008, 05:56 PM	#3
KingChronic Hardcore Enthusiast iTrader: 0 / 0% 04 Whipple Cobra Fuckin Fast Join Date: Dec 2007 Location: Alexandria, VA Posts: 2,430	damn this is a good deal __________________ 04 Torch Red Cobra #456 of 3768 born on 11/21/03

March 12th, 2008, 05:11 PM	#5
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	I would also consider trading for 2- 17x10.5 Black Fr500's w/ drag radials with plenty of tread left on them. __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 13th, 2008, 03:10 PM	#6
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Ttt __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 14th, 2008, 12:30 PM	#7
ECUSVT31 Regular iTrader: 0 / 0% 1999 SVT Cobra Join Date: Dec 2007 Location: North Carolina Posts: 390	awesome deal, too bad i only have a 99 cobra __________________

March 14th, 2008, 01:17 PM	#8
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	It's a good start to a conversion!!! __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 16th, 2008, 11:26 AM	#9
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Bump __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 19th, 2008, 06:38 PM	#10
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Ttt __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 25th, 2008, 01:19 PM	#11
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Ttt __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

March 31st, 2008, 04:34 PM	#12
speedybolt Newbie iTrader: 0 / 0% Join Date: Nov 2007 Posts: 30	Bump __________________ 68W10 Combat Medic YOU CAN'T FIX STUPID

April 4th, 2008, 06:45 PM	#13
CobraKid90 Newbie iTrader: 0 / 0% Join Date: Mar 2008 Posts: 25	were u from man?

Threads Similar to: Stiegemier Stage 3 Ported Eaton 03/04 Cobra
Thread	Thread Starter	Forum	Replies	Last Post
03-04 Cobra Eaton Supercharger on your 2V	White99stang	99-04	73	June 14th, 2008 10:51 PM
Ported Stage II PI Heads	andres0286	Engine	14	March 14th, 2008 06:35 PM
what kind of power to expect ported heads/stage 2 cams	Bigb2000GT	2005+	3	February 17th, 2008 11:57 AM
'88 Ford 302 w/ 03 Cobra ported heads	ztrane	5.0 Mustangs	17	March 20th, 2007 11:12 PM

All times are GMT -4. The time now is 10:13 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.