8 rib pulley

BrokePerformance · December 28th, 2006, 08:04 PM

Quick question... On a supercharged car 2003 mustang GT (vortech) if u wana run a 8 rib pulley(on the charger) would you have to change the rest of the pullies to match it. I would think soo but just wana make sure. Thanks in advance

BrokePerformance · December 28th, 2006, 08:37 PM

Ok i found out ita a 8 rib kit and its kinda pricy....

pimpdout98gt · April 1st, 2008, 10:11 PM

you dont ezactly have to convert all the other pullies to 8 rib but you run the risk of the belt sliding a rib possibly

diablostang · April 3rd, 2008, 06:13 PM

Yes, you have to convert all the pullies to 8 rib in order to run a proper 8 rib setup. You'll also need some spacers to move the supercharger and idler brackets back away from the engine a little to allow for the extra space the 8 rib kits take up.

The 8 rib kits will run in the ballpark of $600 + $500 install average.

Green Hornet · April 3rd, 2008, 06:35 PM

just get the stock pullies off a expiditon, or a naviagator.....same thing, but are 8 rib. thats what i did a while ago...i think i payed arround 350 for everything..i also have a water pump pully 8 rib if interested

December 28th, 2006, 08:04 PM	#1
BrokePerformance Regular Join Date: Dec 2006 Posts: 50	8 rib pulley Quick question... On a supercharged car 2003 mustang GT (vortech) if u wana run a 8 rib pulley(on the charger) would you have to change the rest of the pullies to match it. I would think soo but just wana make sure. Thanks in advance

April 3rd, 2008, 06:13 PM	#4
diablostang April 08 ROTM Join Date: Mar 2008 Posts: 31	Yes, you have to convert all the pullies to 8 rib in order to run a proper 8 rib setup. You'll also need some spacers to move the supercharger and idler brackets back away from the engine a little to allow for the extra space the 8 rib kits take up. The 8 rib kits will run in the ballpark of $600 + $500 install average. __________________ '96 Cobra, Griggs GR-40 full suspension. Built engine + blower

April 3rd, 2008, 06:35 PM	#5
Green Hornet Regular Join Date: Nov 2006 Location: Algonquin IL Posts: 198	just get the stock pullies off a expiditon, or a naviagator.....same thing, but are 8 rib. thats what i did a while ago...i think i payed arround 350 for everything..i also have a water pump pully 8 rib if interested __________________ SPECIAL THANKS TO: www.afterburninc.com www.dynotunemp.com http://www.per-race-engines.com [/color][/url]

Threads Similar to: 8 rib pulley
Thread	Thread Starter	Forum	Replies	Last Post
new pulley	chozen1	2005+	7	August 8th, 2007 12:06 PM
ud pulley	miles miles	V6 Mustangs	12	May 21st, 2007 09:48 AM
ud pulley	mmvi	V6 Mustangs	4	May 2nd, 2007 12:35 PM
UD pulley is on	ByPopularDemand	V6 Mustangs	8	April 12th, 2007 04:19 PM
What Is This Pulley?	chadderkdawg	5.0 Mustangs	13	October 6th, 2006 12:50 AM

December 28th, 2006, 08:37 PM	#2
BrokePerformance Regular Join Date: Dec 2006 Posts: 50	Ok i found out ita a 8 rib kit and its kinda pricy....

April 1st, 2008, 10:11 PM	#3
pimpdout98gt Regular 1998 Ford Mustang GT Join Date: Apr 2008 Location: Clarksville, TN. Posts: 76	you dont ezactly have to convert all the other pullies to 8 rib but you run the risk of the belt sliding a rib possibly

All times are GMT -4. The time now is 08:42 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.