Engine specs 2002 GT

bittydrew · January 20th, 2007, 05:51 PM

I was wondering my engine specs by ford like how much compression what kind of block and so fourth. Does anyone know an email address I can find the infromation out on?

StangAddiction · January 20th, 2007, 07:15 PM

alright....here's the specs..:

4.6L Cast Iron V8
3.552(bore)x5.543(stroke)
SOHC 2v/cyl
260hp@5200rpm
302lb-ft@4000rpm
9.4:1 compression

anything else you need to know?

Drgnracin72 · January 20th, 2007, 07:45 PM

good man stangaddiction, hit it right on the head

bittydrew · January 20th, 2007, 08:39 PM

Just wondering about it thanks don't know about the cast iron block mine looks like its aluminum . Maybe I'm wrong .

Drgnracin72 · January 20th, 2007, 08:55 PM

if youve got a 02 gt its iron, its strong as hell too

bittydrew · January 20th, 2007, 09:03 PM

How much hp can I get out of it stock? Without blowing up the motor.
and how much can you move the rpms up till they blow. Thinking about a cam install first to improve the breathing part. And with putting a new tb on one should you have a tune I know I probably want a tune after I but a cam into it
Just want to try to get as many hp out of it right now N/A .
The motor only has 41k on it .

Invictus · January 21st, 2007, 08:04 PM

you're good until about 400 HP to the wheels anything more and i'd start beefin up the bottom end a bit.

mdvaldosta · January 21st, 2007, 08:16 PM

I made 412 to the wheels for about 2 years. Rev limiter set to 6k and and I shifted off it quite regularly. NA you won't get past 300 rwhp without cams / heads or a poweradder. I know a guy that's got a cammed / ported head setup on the stock bottom end and has been running it hard to 6800 rpm's for at least a year. As the power comes up the revs have to go down until you've got forged rods / pistons.

StangAddiction · January 23rd, 2007, 07:19 PM

your stock internals will hold up to 450hp i believe, but i wouldn't push it to that limit..

ChrisJ · January 24th, 2007, 03:06 AM

400/400

You can get away with up to 420rwhp from what i have seen but 400/400 is safe and still fun...

sleepinggt · January 26th, 2007, 09:15 PM

there's a guy that post on modulardepot that has run his at around 500 rwhp on the stock shortblock for 20,000+ miles, the tune is golden though

January 20th, 2007, 05:51 PM	#1
bittydrew Newbie 2002,Mustang GT Join Date: Nov 2006 Location: Lincoln, Nebraska Posts: 15	Engine specs 2002 GT I was wondering my engine specs by ford like how much compression what kind of block and so fourth. Does anyone know an email address I can find the infromation out on?

January 20th, 2007, 07:45 PM	#3
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,345	good man stangaddiction, hit it right on the head __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

January 20th, 2007, 08:55 PM	#5
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,345	if youve got a 02 gt its iron, its strong as hell too __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

January 24th, 2007, 03:06 AM	#10
ChrisJ MuchCoolerThanGTsetGO 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 16,281	400/400 You can get away with up to 420rwhp from what i have seen but 400/400 is safe and still fun... __________________ My Junk www.myspace.com/cjobe

Threads Similar to: Engine specs 2002 GT
Thread	Thread Starter	Forum	Replies	Last Post
V6 Engine Specs	turp	V6 Mustangs	48	May 6th, 2008 11:52 PM
2002 GT VERT / 2003/04 MACH 1 Engine Swap	JBasco20	Modular Mustangs	4	September 24th, 2007 06:41 PM
Stock engine specs	hubba076	99-04	2	August 17th, 2007 06:36 PM
factory engine specs on 87 5.0?	marks87gt	Engine	2	June 12th, 2007 08:00 AM
Will a 2002 Gt Engine Directly Replace a 2000GT engine?	Bigb2000GT	99-04	7	April 22nd, 2007 06:09 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

January 20th, 2007, 07:15 PM	#2
StangAddiction Enthusiast 2000 Mustang GT Join Date: Jan 2007 Location: Virginia Beach Posts: 961	alright....here's the specs..: 4.6L Cast Iron V8 3.552(bore)x5.543(stroke) SOHC 2v/cyl 260hp@5200rpm 302lb-ft@4000rpm 9.4:1 compression anything else you need to know?

January 20th, 2007, 08:39 PM	#4
bittydrew Newbie 2002,Mustang GT Join Date: Nov 2006 Location: Lincoln, Nebraska Posts: 15	Just wondering about it thanks don't know about the cast iron block mine looks like its aluminum . Maybe I'm wrong .

January 20th, 2007, 09:03 PM	#6
bittydrew Newbie 2002,Mustang GT Join Date: Nov 2006 Location: Lincoln, Nebraska Posts: 15	How much hp can I get out of it stock? Without blowing up the motor. and how much can you move the rpms up till they blow. Thinking about a cam install first to improve the breathing part. And with putting a new tb on one should you have a tune I know I probably want a tune after I but a cam into it Just want to try to get as many hp out of it right now N/A . The motor only has 41k on it .

January 21st, 2007, 08:04 PM	#7
Invictus Hardcore Enthusiast 1999 Mustang Join Date: Jul 2006 Posts: 1,311	you're good until about 400 HP to the wheels anything more and i'd start beefin up the bottom end a bit.

January 21st, 2007, 08:16 PM	#8
mdvaldosta Maintenance Man 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,943	I made 412 to the wheels for about 2 years. Rev limiter set to 6k and and I shifted off it quite regularly. NA you won't get past 300 rwhp without cams / heads or a poweradder. I know a guy that's got a cammed / ported head setup on the stock bottom end and has been running it hard to 6800 rpm's for at least a year. As the power comes up the revs have to go down until you've got forged rods / pistons.

January 23rd, 2007, 07:19 PM	#9
StangAddiction Enthusiast 2000 Mustang GT Join Date: Jan 2007 Location: Virginia Beach Posts: 961	your stock internals will hold up to 450hp i believe, but i wouldn't push it to that limit..

January 26th, 2007, 09:15 PM	#11
sleepinggt Regular Join Date: Dec 2006 Posts: 96	there's a guy that post on modulardepot that has run his at around 500 rwhp on the stock shortblock for 20,000+ miles, the tune is golden though

All times are GMT -4. The time now is 12:36 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.