[rchauvin]

I need a link where i can find supercharger kits for a 04 mach 1.

i would also like to know what i can do to increase horsepower besides a supercharger. i have already installed a steeda cold air intake but thats it as far as increasing horsepower.

thanks

[orangeRcode]

Long tubes and o/r mid pipe will really wake up your Mach. PHP intake spacer is a nice mod for around $100. Gears will help make it quicker but won't add any power. Sticky tires will get your short time down but be careful on stock axles. Good luck and happy modding.

[97Cobra]

Welcome to MM! did you check Vortech? or Procharger? i know theres a bunch out there.

[03 R Code]

I'm pretty sure Ken Bell makes a supercharger for the Mach 1's, I think. I ordered a PHP spacer yesterday from a guy that makes them on the registry. $98 shipped isn't a bad price at all. most people report 5-8 rwhp gains and even more torque. Like orange said, gears, longtubes, stickies and axles are all great mods. I'll be getting some new axles and a new carrier from him soon!

Let us know how things go with your new mods.

[matrixpuba]

vortech, paxton, procharger, kenne bell are all good blowers. i am partial to prochargers myself. every stang i ever had and will have a procharger on it

[rchauvin]

I will check out the php you guys are talking about.

Also can you guys paste me links where i can buy stuff to mod my car it can be anything from horsepower adders or just something that looks good on the mach 1's.

So for what I have done to my car is this,

1. Steeda High Velocity Cold Air Kit - Mach 1

2. MRT H-Pipe

3. 2004 Saleen tires and rims

4. racing spark plugs.

5. royal purple oil

If you guys can think of anything else I can do please let me know. Thanks

[rchauvin]

ok i cant seem to find the website that sells the pho spacers for the mach1?

[raceruler03]

go with the kenne bell. My best friend has an 04 mach one with a forged block and the compression lowered to 8:5:1 and he is looking into a kenne bell, with the heads and cams he just ordered it will put down around 600 or more to the tires.

[pa.ulB]

put a new exaust system in it, gears, intake spacer, performance chip and that should keep you busy for a little bit + i would go w/ a kenne bell supercharger

[pa.ulB]

but prochargers are very nice too

[rchauvin]

Can anyone tell me what website has the spacers?

[rchauvin]

also can anyone suggest a good tuner and once I get the tuner what specifications do I put it at?

[03 R Code]

Go to www.mach1registry.com and register a name in there forums. A lot of great people there that know a lot of specifics about our cars. I just registered there myself a few weeks ago. Look for a guy named Roy, that's his screen name on the site, and send him a PM about the spacers. He sells them and will let you know how much, how to pay, address and all that good shit.

You should get a dyno tune from a pro, like a speed shop with a great reputation. I've noticed that most shops now adays like to use the SCT chips, not to be confused with superchips tuning, completely different company. Depending on where you are from, you could probably find someone on this site, or the registry that can tell you of a tuner in your local area that will do a good job.

Good luck!

[rchauvin]

Thanks R Code I will try that