Trying to locate a specific 6 pin ford maf

HMUSN · May 5th, 2008, 08:39 PM

ya know what.. lol I was wrong.. I just looked up the thread on when I bought it and it turns out is was an 80mm off of an 01 Cobra.. my bad

HMUSN · May 5th, 2008, 08:40 PM

Originally Posted by ChrisJ

So your using the IAT on the MAF?

no mine is not integrated. I drilled a hole in my JLT for the iat

popsicle · May 5th, 2008, 10:42 PM

so 01 cobra? what engine size?

itschristorres8 · May 5th, 2008, 11:23 PM

if this is for a v6 go to ford ask for an 01-04 MAF harness

the 01-04 use a 6pin harness which the MAF as a built in IAT in it. unlike the 99-00

HMUSN · May 6th, 2008, 10:10 AM

Originally Posted by popsicle

so 01 cobra? what engine size?

my car is a GT but the maf I bought and tuned for is off an 01 Cobra. the 01 Cobra has a 4.6L DOHC

ChrisJ · May 6th, 2008, 10:26 AM

Originally Posted by HMUSN

no mine is not integrated. I drilled a hole in my JLT for the iat

I know that but 02-04 are integrated...Just have to take outside gray wires off and put them on a 03 lightning IAT...

popsicle · May 6th, 2008, 09:08 PM

so i'm looking for 01 cobra maf correct. with the iat NOT integrated. i don't need that as the bmw already has an iat on a seperate plug.

ChrisJ · May 6th, 2008, 09:10 PM

Originally Posted by popsicle

so i'm looking for 01 cobra maf correct. with the iat NOT integrated. i don't need that as the bmw already has an iat on a seperate plug.

The 01+ lightning maf has an external IAT as well...

May 5th, 2008, 11:23 PM	#24
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,493	if this is for a v6 go to ford ask for an 01-04 MAF harness the 01-04 use a 6pin harness which the MAF as a built in IAT in it. unlike the 99-00 __________________ TMA Turbo's Race kit ported heads and intakes-CRT performance- www.crtperformance.webs.com !! reground 216/216 camshaft .580-.600 springs- RPM 5.8psi goal-340-360rwhp boost control-10psi or under goal-400rwhp!! yeah on a v6

Threads Similar to: Trying to locate a specific 6 pin ford maf
Thread	Thread Starter	Forum	Replies	Last Post
Ford Lightning MAF Harness To Use On A Fox	vfast	For Sale	2	November 18th, 2007 08:58 AM
Ford Racing Hood Latch & Pin Kit	gills99stang	99-04	69	August 1st, 2007 04:37 AM
Best website to locate used parts ANYWHERE CANADA OR US!	Juggalo_X	The Clubhouse	0	June 6th, 2007 10:09 AM
Where Can I Locate This (Canister Vent Solenoid)	gforceman	96-98	0	October 20th, 2006 07:32 PM
are 4 pin vs 5 pin relays the same	OTreborO	5.0 Mustangs	3	August 21st, 2006 01:24 AM

May 5th, 2008, 10:42 PM	#23
popsicle Newbie Join Date: May 2008 Posts: 11	so 01 cobra? what engine size?

May 6th, 2008, 09:08 PM	#27
popsicle Newbie Join Date: May 2008 Posts: 11	so i'm looking for 01 cobra maf correct. with the iat NOT integrated. i don't need that as the bmw already has an iat on a seperate plug.

All times are GMT -4. The time now is 07:57 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.