Trying to locate a specific 6 pin ford maf

popsicle · May 4th, 2008, 07:36 PM

hey guys. i'm trying to locate a specific maf. i have a turbo bmw, the company that offered the tune on my car for my custom setup uses a certain ford 6 pin maf( part numbers erased

). pretty much i'm suspecting it's from one of the big 80mm mafs. it's got the following numbers on it 2499464, EABCDF, and underneath on the silver face of the sensor is 122 5 0457. i'm sure the company erased the relevant info so that you can't just replace the sensor element but rather have to purchase a new maf from them for $$.

it looks very much like this except it's 6 pin. i'm speculating since my car is obd2 it may be from a ford lightning.

popsicle · May 4th, 2008, 07:37 PM

oh and my maf doesn't say ford on it either. in place of FORD it says >PBT-GF30<
thanks again guys.

HMUSN · May 4th, 2008, 07:50 PM

it's a bosch MAF.

HMUSN · May 4th, 2008, 07:53 PM

you should step up to an SCT Maf

popsicle · May 4th, 2008, 08:22 PM

i would but i need to find the exact match for what my tune is for. also there's some scaling factors that prevent me from just choosing any other maf.

ChrisJ · May 4th, 2008, 08:27 PM

This is what google told me...

2000 E430 MAF question. - MBWorld.org Forums

ChrisJ · May 4th, 2008, 08:29 PM

Another
Interesting results for MAF from GermanStar.net - MBWorld.org Forums

popsicle · May 4th, 2008, 08:51 PM

HMUSN:
i'm seaching for bosche maf. but they don't look like the one i pictured. do you know what car they are specific to? thanks for the help thus far.

ChrisJ · May 4th, 2008, 08:57 PM

The MAF you have the picture of looks like a Lightning MAF...

HMUSN · May 4th, 2008, 08:58 PM

it's off a 2003 Lightning

ChrisJ · May 4th, 2008, 09:01 PM

Originally Posted by HMUSN

it's off a 2003 Lightning

Which is

90mm 2001-04 F-150 Lightning Mass Air Meter

Heres the part numbers for the MAFs...

80mm = XL3F-12B579-AA
90mm = 1L3Z-12B579-AA (might be 1L3Z-12B5579AA)

popsicle · May 4th, 2008, 09:32 PM

well the one in the picture is the 80mm off a obd2 SHO. and mine looks exactly like that. on the sensor element(part that is in the intake tract has the following inscription...>pet-[gf+p]35<
you guys are awesome. i'm heavily researching as well on my end.

HMUSN · May 4th, 2008, 09:34 PM

"pet-[gf+p]35<" will be car specific.. so that's no help.
SHO ftw .. lol I had one.

It's off an L. I garuntee it.

popsicle · May 4th, 2008, 09:43 PM

so i should be looking for 2003 ford lightning eh? i just did my calculations. my charge pipes are 3" so i'm assuming i should be looking for an 80mm maf. funny because mine looks exactly as the one i posted in the pic above except it's EABCDF

HMUSN · May 4th, 2008, 09:44 PM

as a side note... maf's can be tuned so as long as the pin count is correct your good..
but yes.. look for one off of an L.

popsicle · May 4th, 2008, 11:11 PM

haha still working on the research. well it's going well. i have found an exact picture of what my sensor looks like

this is off a 3.8 v6 ford winstar.
my maf pipe is 80mm or 3" so i think we are getting closer. i still need to find the exact piec and i'm not sure if i will be able to with my part numbers crossed out. the ford lightning maf is definitely different. and notice this one doesn't say ford on the sensor element.

popsicle · May 5th, 2008, 08:27 PM

anyone?

ChrisJ · May 5th, 2008, 08:29 PM

It could be just a MAF that was bought from AutoZone or another auto store...Not all of them have the Ford on them...

HMUSN · May 5th, 2008, 08:30 PM

I'll go take a look at my maf in the morning and grab a part number just to be sure..
I know mine is an 80mm off an L

ChrisJ · May 5th, 2008, 08:37 PM

So your using the IAT on the MAF?

May 4th, 2008, 07:36 PM	#1
popsicle Newbie Join Date: May 2008 Posts: 11	Trying to locate a specific 6 pin ford maf hey guys. i'm trying to locate a specific maf. i have a turbo bmw, the company that offered the tune on my car for my custom setup uses a certain ford 6 pin maf( part numbers erased). pretty much i'm suspecting it's from one of the big 80mm mafs. it's got the following numbers on it 2499464, EABCDF, and underneath on the silver face of the sensor is 122 5 0457. i'm sure the company erased the relevant info so that you can't just replace the sensor element but rather have to purchase a new maf from them for $$. it looks very much like this except it's 6 pin. i'm speculating since my car is obd2 it may be from a ford lightning.

May 4th, 2008, 08:27 PM	#6
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,845	This is what google told me... 2000 E430 MAF question. - MBWorld.org Forums __________________ My Junk www.myspace.com/cjobe

May 4th, 2008, 08:29 PM	#7
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,845	Another Interesting results for MAF from GermanStar.net - MBWorld.org Forums __________________ My Junk www.myspace.com/cjobe

May 4th, 2008, 08:57 PM	#9
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,845	The MAF you have the picture of looks like a Lightning MAF... __________________ My Junk www.myspace.com/cjobe

May 5th, 2008, 08:29 PM	#18
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,845	It could be just a MAF that was bought from AutoZone or another auto store...Not all of them have the Ford on them... __________________ My Junk www.myspace.com/cjobe

May 4th, 2008, 07:37 PM	#2
popsicle Newbie Join Date: May 2008 Posts: 11	oh and my maf doesn't say ford on it either. in place of FORD it says >PBT-GF30< thanks again guys.

May 4th, 2008, 08:22 PM	#5
popsicle Newbie Join Date: May 2008 Posts: 11	i would but i need to find the exact match for what my tune is for. also there's some scaling factors that prevent me from just choosing any other maf.

May 4th, 2008, 08:51 PM	#8
popsicle Newbie Join Date: May 2008 Posts: 11	HMUSN: i'm seaching for bosche maf. but they don't look like the one i pictured. do you know what car they are specific to? thanks for the help thus far.

May 4th, 2008, 09:32 PM	#12
popsicle Newbie Join Date: May 2008 Posts: 11	well the one in the picture is the 80mm off a obd2 SHO. and mine looks exactly like that. on the sensor element(part that is in the intake tract has the following inscription...>pet-[gf+p]35< you guys are awesome. i'm heavily researching as well on my end.

May 4th, 2008, 09:43 PM	#14
popsicle Newbie Join Date: May 2008 Posts: 11	so i should be looking for 2003 ford lightning eh? i just did my calculations. my charge pipes are 3" so i'm assuming i should be looking for an 80mm maf. funny because mine looks exactly as the one i posted in the pic above except it's EABCDF

May 4th, 2008, 11:11 PM	#16
popsicle Newbie Join Date: May 2008 Posts: 11	haha still working on the research. well it's going well. i have found an exact picture of what my sensor looks like this is off a 3.8 v6 ford winstar. my maf pipe is 80mm or 3" so i think we are getting closer. i still need to find the exact piec and i'm not sure if i will be able to with my part numbers crossed out. the ford lightning maf is definitely different. and notice this one doesn't say ford on the sensor element.

May 5th, 2008, 08:27 PM	#17
popsicle Newbie Join Date: May 2008 Posts: 11	anyone?

May 5th, 2008, 08:37 PM	#20
ChrisJ MM Ninjas! 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Williamsburg, Virginia Posts: 14,845	So your using the IAT on the MAF? __________________ My Junk www.myspace.com/cjobe

Threads Similar to: Trying to locate a specific 6 pin ford maf
Thread	Thread Starter	Forum	Replies	Last Post
Ford Lightning MAF Harness To Use On A Fox	vfast	For Sale	2	November 18th, 2007 08:58 AM
Ford Racing Hood Latch & Pin Kit	gills99stang	99-04	69	August 1st, 2007 04:37 AM
Best website to locate used parts ANYWHERE CANADA OR US!	Juggalo_X	The Clubhouse	0	June 6th, 2007 10:09 AM
Where Can I Locate This (Canister Vent Solenoid)	gforceman	96-98	0	October 20th, 2006 07:32 PM
are 4 pin vs 5 pin relays the same	OTreborO	5.0 Mustangs	3	August 21st, 2006 01:24 AM

All times are GMT -4. The time now is 11:41 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.