MustangMatt96GT's 1996 Mustang GT 25.3 SFI build

MustangMatt96GT · September 3rd, 2011, 06:35 PM

351W street car, in my 1996 Mustang GT. Car has been 10.40s@ 127 mph here at this altitude.

New goal, 9.50's at this altitude while still being able to street drive it. Car has a blower bolted on now. Just do not have a Blow through carb yet, or a fuel system to support it.

here is a start up video.

Novi 2000 efi renegade setup - YouTube

The rest of the parts to finish will be ordered tuesday, and hopefully some dyno time towards the end of this month. Healthy little street car!!

BWAL · September 3rd, 2011, 06:40 PM

first

lol @ your mom's hair

MustangMatt96GT · September 3rd, 2011, 06:53 PM

Some new swag too... Both related to X275 racing class... what im building the car towards now.

futureMACH1racer · September 3rd, 2011, 07:23 PM

Sweet! I will take one of those shirts in size 2XL..

JTs03v6 · September 3rd, 2011, 07:38 PM

Sweet build! What ci motor and whats done to the top end? you gonna keep the spray with the blower?

Nitrous is just so damn hard on a motor,lol.

nm, saw your garage. Theys say bitrous and blower cams are very similar, so you should be close with the one you got.

MustangMatt96GT · September 3rd, 2011, 07:58 PM

360 cubic inches. Has a nitrous cam in it, going to use it intally cause it's close enough in overlap for a blower cam. Eventually will put in my own custom grind.

Nitrous plate is going to be foresale. I'll be on E85 and carbed so I'm hoping to keep the IATs down with those two facts. But if not a small nitrous hit will be Used as an intercooler.

MustangMatt96GT · September 3rd, 2011, 10:26 PM

MustangMatt96GT · September 7th, 2011, 12:23 AM

All the fuel parts have been ordered, other than the carb! Should be getting close!!! Also should NEVER have to put a new system in the car.

-8 Feed line, -10 Return line, Aeromotive boost reference regulator 13202, MagnaFuel 4303 pump ( 2000 hp EFI pump). I will get the pressure down from the pump using the bypass regulator...

Should be interesting!

NO_PI_NO_POWER · September 7th, 2011, 12:52 AM

Beast.

G.T. Rags · September 7th, 2011, 12:57 AM

damn matt......

i could have bought a shit ton of hookers with the money you've put into that car over the last 5 years...

MustangMatt96GT · September 7th, 2011, 01:00 AM

Originally Posted by G.T. Rags

damn matt......

i could have bought a shit ton of hookers with the money you've put into that car over the last 5 years...

I mean so could have I, but I really only have one passion in life... And that is to honestly go fast and build the car that im going fast in. I know it sounds corny. But I went skydiving this summer.... ZERO adreneline rush for me, but every time I start up my car and know that it can run 135 MPH plus in a quarter mile, i get a funny feeling inside. And every time I stage the car my adrelene sky rockets...

There is nothing that can replace the car I have and what I have learned in this car.

G.T. Rags · September 7th, 2011, 01:03 AM

you obviously haven't spent a night in bwals bedroom....

MustangMatt96GT · September 7th, 2011, 10:07 PM

Radiator, BOV has been ordered now too!

MustangMatt96GT · September 8th, 2011, 08:22 PM

Sure doesn't Look like the total I spent on these bad boys... But here is all the lines and fittings for the fuel system!

CSU carb was ordered today. Prolly take 2-3 weeks for that to show up though. Just a matter of waiting for all the parts to show up now. Everything but a datalogger and a Radiator Fan setup has been ordered.

The BeCool Radiator will be here tuesday. Procharger Red BOV might be here tomorrow. The carb hat and spacer has a possibility too.

I want the carb hat and the spacer here so I can cut my hood the way I need to to make it fit.

roosgt! · September 8th, 2011, 09:36 PM

Loving the car Matt, it's gonna be a beast when done.
And if you think about it I helped pay for those part's lol.

MustangMatt96GT · September 8th, 2011, 10:00 PM

Originally Posted by roosgt

Loving the car Matt, it's gonna be a beast when done.
And if you think about it I helped pay for those part's lol.

You can think of it that way haha, but realistically you paid for about half my blower setup!

roosgt! · September 8th, 2011, 10:52 PM

Well im happy I could contribute some of my money for a good cause lol.

JakeM · September 9th, 2011, 12:20 AM

Good looking build. Keep us posted!

MustangMatt96GT · September 9th, 2011, 10:07 AM

Don't worry haha I will update as parts show up and go on.

35thredproject · September 9th, 2011, 11:23 AM

Originally Posted by MustangMatt96GT

I mean so could have I, but I really only have one passion in life... And that is to honestly go fast and build the car that im going fast in. I know it sounds corny. But I went skydiving this summer.... ZERO adreneline rush for me, but every time I start up my car and know that it can run 135 MPH plus in a quarter mile, i get a funny feeling inside. And every time I stage the car my adrelene sky rockets...

There is nothing that can replace the car I have and what I have learned in this car.

This is what it's all about. In highschool everyone went to drink and party, I went to work or to drive my car with the crew in town. When the only thing you can think about is ur car.. I know the feeling!! SWEET build though, awesome man. 351 Cleveland

. Appreciate putting the pics up, no reason to hide builds like this in the closet!

September 3rd, 2011, 06:53 PM	#3
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	Some new swag too... Both related to X275 racing class... what im building the car towards now. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

September 3rd, 2011, 07:23 PM	#4
futureMACH1racer I.D.G.A.F. 2009 John Deere 9670 Join Date: Sep 2007 Location: United States of America Posts: 11,347 iTrader: 0 reviews	Sweet! I will take one of those shirts in size 2XL.. __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

September 3rd, 2011, 07:38 PM	#5
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Sweet build! What ci motor and whats done to the top end? you gonna keep the spray with the blower? Nitrous is just so damn hard on a motor,lol. nm, saw your garage. Theys say bitrous and blower cams are very similar, so you should be close with the one you got. __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

September 3rd, 2011, 07:58 PM	#6
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	360 cubic inches. Has a nitrous cam in it, going to use it intally cause it's close enough in overlap for a blower cam. Eventually will put in my own custom grind. Nitrous plate is going to be foresale. I'll be on E85 and carbed so I'm hoping to keep the IATs down with those two facts. But if not a small nitrous hit will be Used as an intercooler. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

September 3rd, 2011, 10:26 PM	#7
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	__________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

September 3rd, 2011, 06:40 PM	#2
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,662 Blog Entries: 2 iTrader: 4 reviews	first lol @ your mom's hair

September 7th, 2011, 12:23 AM	#8
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	All the fuel parts have been ordered, other than the carb! Should be getting close!!! Also should NEVER have to put a new system in the car. -8 Feed line, -10 Return line, Aeromotive boost reference regulator 13202, MagnaFuel 4303 pump ( 2000 hp EFI pump). I will get the pressure down from the pump using the bypass regulator... Should be interesting! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

September 7th, 2011, 12:52 AM	#9
NO_PI_NO_POWER Granny Shifter 1997 Mustang GT 12.297@113.47 Join Date: Jul 2008 Location: Greeley, CO Posts: 752 iTrader: 0 reviews	Beast. __________________ 1997 GT 2.6L Kenne Bell Build Thread 1989 LX

September 7th, 2011, 10:07 PM	#13
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	Radiator, BOV has been ordered now too! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

September 8th, 2011, 08:22 PM	#14
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	Sure doesn't Look like the total I spent on these bad boys... But here is all the lines and fittings for the fuel system! CSU carb was ordered today. Prolly take 2-3 weeks for that to show up though. Just a matter of waiting for all the parts to show up now. Everything but a datalogger and a Radiator Fan setup has been ordered. The BeCool Radiator will be here tuesday. Procharger Red BOV might be here tomorrow. The carb hat and spacer has a possibility too. I want the carb hat and the spacer here so I can cut my hood the way I need to to make it fit. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars Last edited by MustangMatt96GT; September 8th, 2011 at 09:59 PM.

September 8th, 2011, 09:36 PM	#15
roosgt! MM Official Sammich Maker 1999 mustang gt n/a Join Date: Jan 2009 Location: Vancouver, British Columbia Posts: 4,121 iTrader: 3 reviews	Loving the car Matt, it's gonna be a beast when done. And if you think about it I helped pay for those part's lol. __________________ KASE Racing 72 Chevell 500hp 74 Comet 500+hp and spray 99 Mustang GT bolt on's and 93 tune 85 Notch 520ci BBF

September 8th, 2011, 10:52 PM	#17
roosgt! MM Official Sammich Maker 1999 mustang gt n/a Join Date: Jan 2009 Location: Vancouver, British Columbia Posts: 4,121 iTrader: 3 reviews	Well im happy I could contribute some of my money for a good cause lol. __________________ KASE Racing 72 Chevell 500hp 74 Comet 500+hp and spray 99 Mustang GT bolt on's and 93 tune 85 Notch 520ci BBF

September 9th, 2011, 10:07 AM	#19
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,692 iTrader: 3 reviews	Don't worry haha I will update as parts show up and go on. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: MustangMatt96GT's 1996 Mustang GT 25.3 SFI build
Thread	Thread Starter	Forum	Replies	Last Post
FOUND: MustangMatt96GT's Christmas Tree	TheUNZippee!	The Clubhouse	15	December 3rd, 2011 05:54 PM
s197 racecar build... need help	streetcav	2005 - 2010	11	August 17th, 2011 06:58 AM
New Racecar (Pics)	04mustang232	The Clubhouse	5	October 19th, 2010 05:43 PM
racecar hits *	C MY 4D	The Clubhouse	10	August 17th, 2009 01:24 AM
next upgrade for my '90 gt racecar?	kbeefy	5.0 Mustangs	3	August 13th, 2007 08:37 PM

All times are GMT -4. The time now is 11:59 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.