[SON1C]

REPS to everyone who helps/offers input in this thread.

2003 GT 4.6l Build

Picked it up 1/9/12

Modifications installed before purchase..

FRPP 4.10's installed @ CJ Pony Parts
4x 18x9 Black Gloss Saleens wrapped in Sumitomos 245/45 front, 275/40 rear
SLP LM1 Catback Exhaust Bolt On
JLT Cold Air Intake
Diablo Sport Tuner W/Speedo Recalibration
Mach 1 Grill Delete
Cobra Shorty Antenna
Brakes Hawk pads and cross/drilled rotors with new calipers (fronts oem style) within last year.
Steeda UD Pullies

Morning after I picked it up -> 1/10/12

Mileage driving it home 1/9/12

Engine Bay before purchase

Interior 1/10/12 (Two Tone Graphite w/ Interior Upgrade Package)

Mileage 1/10/12


Came with stock Mach 460 audio

Bumped to dd on 2.4.12

[SON1C]

2001 3.8l Build

47xxx Miles
100% Stock
Two Tone Tan Parchment Cloth Interior

Sitting on the Ford Dealer Lot May 2009



First mod.. Bumper Inserts Gloss Black from AM (Look as good as they did 3 years ago when I installed them)



Black Fuel Door from AM (Stack Racing) (Paint bubbled within 2 years poor quality imo)



Xenon Hoodscoop painted Gloss black (from American Muscle) and Black Bullits 17x9 x4 +black acorn lugs from AM wrapped in goodyear eagle gts 245/45



8 Inch Shorty antenna from AM September 2010 (also pickedup smoked black housings off of amazon shipped for 90 sometime between 2009-2010

Also had the tint redone to va legal

2011

Got more into detailing and started off with some OTC products

Pickedup an SCT Tuner w/ bama Tunes from AM


Mach 1 Chin and Grille







Mac O/R H -> Custom Catback Thrush Chambered 2.5" 3.5" Magnaflow slant cut tips (not the best video, was warm out and had exhaust leaks)



11/11


12/11 Restored wiper arms (Before/After)


12/11 Plastidipped spare set of wheels i pickedup off CL and wrapped them in wtfcrunch's tires I bought from him







How the Pony sat 1/12 (67xxx)



Starting 11/12 began demodding and progress can be seen in 1/12 picture demodding was 80% complete with only audio needing to be pulled and stock exhaust reinstalled.

Middle of January installed frakenstein stock exhaust


that was before it was finished, had a turn down tip tucked right up under the bumper cover for a nice clean look.

Noticed rust on chrome lug nuts while I was removing Plastidip


1/26/12 listed vehicle on Craigslist with these sale pictures









1/31/12 ...within a week, she sold.
Departure Picture

[SON1C]

This right now is the plan most likely for long term exhaust -> would just be swapping stock midpipe to mac pro

2000 Mustang Gt 0-60 SLP LM1, Mac Pro Chamber, AFE CAI, Fly by, HD - YouTube

2000 Mustang Gt 0-60 SLP LM1, Mac Pro Chamber, AFE CAI, Fly by, HD - YouTube

mac pro ^

this is with stock midpipe

2000 Mustang GT Fly-Bys SLP Loudmouth 1 Exhaust - YouTube

2000 Mustang GT Fly-Bys SLP Loudmouth 1 Exhaust - YouTube

[SON1C]

A big thanks to for great products, prices, and customer service.


Thanks to WWW.MoneyCrate.NET

[SON1C]

[B's04gt]

[SON1C]

Originally Posted by B's04gt

its been under construction, will finish tomorrow once im out of class before i head to work.

[Green_6er]

i kind of like the painted bullits better than the black and chrome ones

[mustangmike!]

so whats up w/ the blue GT ?

[SON1C]

Originally Posted by Green_6er i kind of like the painted bullits better than the black and chrome ones

Originally Posted by mustangmike! so whats up w/ the blue GT ?

@green lol yeah me too, i think its partially because theyre very played out and its just nice to have something different, i think they all black w/ chrome lugs and centercaps just look more sinister

@mike About to update that post, just picked it up.

[ChrisJ]

Originally Posted by mustangmike! so whats up w/ the blue GT ?

Agreed

[SON1C]

silver piece i guess bezel? around the hvac headunit center piece, is that stock or was that painted?

Also are stock pedals the dark plastic or could they sort of look like chrome billet pieces? theyre chrome with holes in them iirc

[ChrisJ]

Thats a IUP...

IUP - Interior Upgrade Package...

The bezels and pedals are all part of it...

[SON1C]

Originally Posted by ChrisJ Thats a IUP... IUP - Interior Upgrade Package... The bezels and pedals are all part of it...

what all is included in the IUP, the bezels, pedals, anything else?

[ChrisJ]

Originally Posted by SteeD43 what all is included in the IUP, the bezels, pedals, anything else?

Should be pedals, shifter bezel, dash thingy and the adjustable headrest...

[SON1C]

Exterior mod list.. i'm thinking a flat black theme

add mach 1 chin
flat black decklid panel
maybe flat black bumper inserts
possibly paint saleens flatblack (i'd really like to add a SB ring/lip around them)
a lot of TLC on detailing the car
maybe do the black billet fuel door? i dont think theyres a flat black one so might get and repaint, i dont really like the way stock fuel doors look painted the chrome pieces in the billet aftermarket are what make those to me.
One of the exhaust tips needs to be adjusted possibly switch to a different tip, dont really care for these
tint... 5%..or 20%.. TBD
Possibly smoke headlights (not too dark)
Delete spoiler if not paint it flat black
Paint calipers red..or maybe sb or black
if fortunate enough to come across an 03 cobra bumper..
paint tire lettering?
rear louvers

[SlowSix]

did you buy this car in PA? There is one on corral that looked almost exactly like this that I was going to look at if they totaled my car.

[SON1C]

Originally Posted by 01SilverSixer did you buy this car in PA? There is one on corral that looked almost exactly like this that I was going to look at if they totaled my car.

yeah i did and yeah thats the one lol

[Nito2v]

I love the method you used for plasti-dipping your wheels (I may do this if I can find stock bullitts). The GT looks great, good luck with it.

[SON1C]

Originally Posted by Ur Panic I love the method you used for plasti-dipping your wheels (I may do this if I can find stock bullitts). The GT looks great, good luck with it.

thanks yeah if you're doing it outdoors i would definitely recommend the cards theyre perfect size for low wind resistance and solid enough to stay in place, thanks again, whats the status with yours last i read you had plans of SCing it?