[itschristorres8]

ok generally i dont like doing this to a person that is running there own small time business or side job like me for making extra $$$ but i have to

I've bought 2 of his parts. one a ported upper intake the second a ported lower intake
the upper i wanted ported to 65mm....he says its 65,mm but its 65mm in like 1 spot. and the runners were volcano'd
by that i mean the very VERY top maybe 1/4 tops 1/2 of and inch from the opening its ported to match the gasket but the 1/4 or 1/2 inch down it slowly well actually QUICKLY inclined back to STOCK!
then the rest is SLIGHTLY ported just to clean off the old surface..then polished to look fully ported...

a job like that takes maybe 1-2hours to do TOPS. polishing is dirt easy. any i ended up PORTING it MYSELF over his.

i contacted him said i didnt like it...he swore it was 65mm port so i said ok...and the volcano'ing?

i wont even give his answer on that because it makes NO SENSE something about better flow or w.e


so i said ok w/e maybe the lower intake will be better.
i was WRONG
another volcano but WORSE the lower intake is a little harder on the more oval shaped runners because where it meets the head theres a lot of porting to be done to open up the space to match the gasket...
nooo not this one. maybe 1/8!! of it is ported, its on such an angle its like 3 angle port...
then polished...
im currently re-porting this one as well now!!

prices are dirt cheap but your getting basically a polished intake!!
i highly dont recommend his porting $90 for an upper intake that maybe took 2 hours...$45 an hour?

then the throttle body...first claims it can be ported to 65mm..there HAS to be a gap on the butterfly valve if he's doing that because its an extra 1mm around it its a TRUE port which im sure is volcano'd

then he says it can be portd to 70mm
i SWEAR TO YOU, the 99-04 THROTTLE bodys CANNOT meet a 70mm PORT. my 65mm almost eats that thing. i've ported to 70+mm on obdnanr's intake and the throttle body will fit in it...


sorry harrison but what your doing is NOT RIGHT

[BWAL]

is he a member here?

[BWAL]

and not to sound like an asshole, but if you're capable of porting, then why didn't you do it all yourself?

[itschristorres8]

Originally Posted by BWAL09 and not to sound like an asshole, but if you're capable of porting, then why didn't you do it all yourself?

yes is he a member on here, not a local shop or anything

im limited on time, im backed up on 2 lower intake i need to do. plus this was before i cared for how i ported. i like the way my intakes come out now and i trust my work. the intakes were meant for my car but i ended up re-porting them now.