[jtillery]

I accumulated a bunch of stuff during my project and it is time to clear out the garage. Some of the large stuff would need to be picked up, but I can ship most of hit. If there is anything you need that isn't listed there is a good chance that I have it.

92 LX Hatchback, burgundy. Cleanest fox I have ever seen, any rust is very minor surface rust and is hard to find. Burgundy with red interior. Complete minus the engine and tranny (was 4 cyl auto) $1200

Steeda Triax Shifter - $100

Nitrous Works 50-175 Nitrous Kit - New 70mm throttle plate $400

NX Genx2 Accessory Kit - New $150

BNM Racing Nitrous Windows Switch w/ lockout - New $100

BBK Cold Air Intake Mass Air 5.0- New $75

Another Cold Air Intake Mass Air 5.0 - $50

Autometer Nitrous Pressure Gauge - Procomp Ultralite

Mass Air Conversion - A9M computer, Superchips Chip, Mass Air Sensor, Harness $175

ADS Speed Density Chip for 5.0 $25

Cervini 4 Piece LX Body Kit - Never Mounted, front and rear bumpers and sideskirts. $400

Non-Airbag (87-89) 140 MPH gauges with new white gauge faces $100

OEM Taillights in like new condition $150 for the pair

Brand new replacement floor pans $100 per side.

Driver and Passenger doors with glass- good shape need minor repair, minor surface rust. Car had manual windows, locks, and mirrors. $50 each or $75 for the pair.

Passenger door with glass - power windows and locks. Nice shape, no rust. $75.

Hatch with glass - has some rust by courtesy lights, could be patched easily or used as is, better condition than most. Glass has rear defrost and is in excellent shape. $50

Hatch with glass - has minor surface rust by courtesy lights. One of the best looking hatches I have seen. Glass has rear defrost and is in excellent shape. Power trunk release. $150

(2) Factory LX Spoilers - Both are in nice shape. $25 each or $15 each with hatch.

Factory Hood- very nice shape $50

Front Bumper - brand new with headlight panel $125

Front Bumper - nice shape with headlight panel $75

Front Fenders - nice shape no rust. 1 is new aftermarket, 1 is oem $50 each $80 for the pair

Rear bumper - nice shape $50

Full interior from 91 Convertible. Premium interior, red. Will seperate, most pieces are good.

Full interior from a 87 Hatchback. Grey, will seperate, all pieces are good.

Door Panels and Armrests (Power windows, locks and mirrors) blue. $100

[jtillery]

[Stangzilla]

Can you show pics? I am interested in the center console if its a manual, the front and rear kick panels and the plastic door sil pieces. Also the front door speaker grill covers.. Can you post pics and prices?

[jtillery]

Originally Posted by Stangzilla Can you show pics? I am interested in the center console if its a manual, the front and rear kick panels and the plastic door sil pieces. Also the front door speaker grill covers.. Can you post pics and prices?

What color do you need? Red or Grey?

[jtillery]

Mass Air Conversion and Speed Density Chip are Sold.

[Stangzilla]

Originally Posted by jtillery Originally Posted by Stangzilla Can you show pics? I am interested in the center console if its a manual, the front and rear kick panels and the plastic door sil pieces. Also the front door speaker grill covers.. Can you post pics and prices? What color do you need? Red or Grey?

Gray..

[5.0]

How much for the hood in the pics, and can I get a better picture of it?

[jtillery]

Originally Posted by Stangzilla Originally Posted by jtillery Originally Posted by Stangzilla Can you show pics? I am interested in the center console if its a manual, the front and rear kick panels and the plastic door sil pieces. Also the front door speaker grill covers.. Can you post pics and prices? What color do you need? Red or Grey? Gray..

Of course you pick the one that is the hardest to get to I have the grey interior packed away in the basement, I will try to get it out tomorrow night to take some pictures.

[Stangzilla]

Originally Posted by jtillery Originally Posted by Stangzilla Originally Posted by jtillery Originally Posted by Stangzilla Can you show pics? I am interested in the center console if its a manual, the front and rear kick panels and the plastic door sil pieces. Also the front door speaker grill covers.. Can you post pics and prices? What color do you need? Red or Grey? Gray.. Of course you pick the one that is the hardest to get to I have the grey interior packed away in the basement, I will try to get it out tomorrow night to take some pictures.

Thanks man...I'll be waiting...

[Steves LX]

I am interested in the cold air intake. I currently have a BBK 75MM TB with the factory intake on it and then A C&L MAF and A K&N mounted on the C&L. Will the cold air intake you have work with the 75MM TB? If so can you post pics or PM me with them?

[jtillery]

Originally Posted by 5.0 How much for the hood in the pics, and can I get a better picture of it?

I don't know if I really want to sell it seperate... There are more pictures of hte car at www.hothotdealz.com Let me know if you are interested in it, and in the meantime, I will try to decide if I want to sell it seperate.

[jtillery]

Originally Posted by Steves LX I am interested in the cold air intake. I currently have a BBK 75MM TB with the factory intake on it and then A C&L MAF and A K&N mounted on the C&L. Will the cold air intake you have work with the 75MM TB? If so can you post pics or PM me with them?

Which cold air intake are you interested in (new or used)? I am pretty sure the cold air intake will work on a 75mm throttle body. I don't have any of finding out for sure though... I do have a 70mm throttle body I can try it on and see how tight of fit it is. We should be able to make a good guess if it will fit or not.

[jtillery]

I put the 92 roller up on eBay. Here is the link to the auction if you are interested http://cgi.ebay.com/ebaymotors/ws/eB...m=280095905843

[jtillery]

Updates:

Sale Pending on Steeda Triax

Stangzilla, I haven't forgotten about you, I have just been slammed at work this week and haven't been able to get the stuff out to take pictures. Hopefully I can get it tonight.

92 roller ends tomorrow early afternoon. Opening bid is $700 buy it now $1000, it is a real nice car for the money.

[Stangzilla]

Originally Posted by jtillery Updates: Sale Pending on Steeda Triax Stangzilla, I haven't forgotten about you, I have just been slammed at work this week and haven't been able to get the stuff out to take pictures. Hopefully I can get it tonight. 92 roller ends tomorrow early afternoon. Opening bid is $700 buy it now $1000, it is a real nice car for the money.

Ok man thanks I'll be waiting....

[Stangzilla]

Originally Posted by Stangzilla Originally Posted by jtillery Updates: Sale Pending on Steeda Triax Stangzilla, I haven't forgotten about you, I have just been slammed at work this week and haven't been able to get the stuff out to take pictures. Hopefully I can get it tonight. 92 roller ends tomorrow early afternoon. Opening bid is $700 buy it now $1000, it is a real nice car for the money. Ok man thanks I'll be waiting....

Hey bro not trying to be a pain but its gettin warmer here and I am lookin to put my interior back together and was wonderin if you dug out that stuff yet?

[jtillery]

Originally Posted by Stangzilla Hey bro not trying to be a pain but its gettin warmer here and I am lookin to put my interior back together and was wonderin if you dug out that stuff yet?

Sorry about that, I definitely haven't forgotten about you, I just have been working 90-100 hour weeks so I haven't had the time to get them out. I have a ton of parts stacked in front of them since I wasn't planning on pulling them out until spring, it will probably take 2 hours to get to it. I know I can do it Sunday, but I may be able to get to it today (just depends on what time I can get out of work).

[jtillery]

Update - Steeda Triax and 92 Hatchback roller are sold.

[Stangzilla]

Originally Posted by jtillery Update - Steeda Triax and 92 Hatchback roller are sold.

90-100 hour weeks. damn bro take a fuckin break!! Ok Like I said I'll be waiting. I wont bother you since I know for sure you did not forget me.. Thanx man...

[jtillery]

Originally Posted by Stangzilla 90-100 hour weeks. damn bro take a fuckin break!! Ok Like I said I'll be waiting. I wont bother you since I know for sure you did not forget me.. Thanx man...

It has been rough, I have been doing to for 4 months now. My normaly work week is 60-65 hours, hopefully I can get back to that soon...

I still didn't get to the parts... I was going to do it Sunday, but forgot my wife was having a baby shower for my cousin at our house and I wasn't "allowed" to get them out... I did take some pics of the interior when I first bought the car, it was dirty in them, but I cleaned it up. It is in real good shape. I also fixed the ash tray lid since the pics, the arm just popped out of the hole, it wasn't broken.
http://www.5.0stang.net/before.htm