[86GT50]

Meziere #WP311 (Blue)
im selling a Blue Meziere Electric Water Pump #WP311, bought it used a few months ago & never installed it on my car. Pump comes with the inlet tube for the thermostat. Pump brand new is over $450.00 from several online performance shops. I just want what I paid for it, $300.00, save some money & get a great deal. Here is the info from the Meziere website for the pump;

The WP311 is designed to be higher performing and easier to install. The flow rate (55 GPM) is higher than all other small block Ford pumps. The motor is raised to allow more clearance for balancers, pulleys, and crank triggers. This pump is ideal for racers and street performance cars. The pump kit includes everything you need for the installation, including heater and lower hose connections.

Features:

* Designed specifically for high horsepower small block Fords.
* These pumps have a 3000 + hour life expectancy.
* Fully polished or anodized in your choice of 4 colors (Black,Blue,Red,Natural).
* Chrome upgrade available.
* All stainless steel hardware included.
* One piece main body fully CNC machined.
* Inlet fitting included.
* Heater and bypass fittings included.
* Plugs for heater and bypass ports also included.
* 55 GPM free flow rating.
* No back plate required.

Applications:

* WP311 - Idler pump for standard 1993 and down 5.0 engine.
* WP373 - Idler pump for 1994-95 short pump front cover. Also for motorsports front cover.See WP373 page here.

Belt drives:
When using the "Danny B"/ Yates belt drive system, spacers must be purchased from Danny B to clear the belt and drive components.

Inlet Configurations: All Ford pump bodies are ported on both the driver and the passenger sides. The lower radiator hose can come from either side. A plug is supplied to block the side not being used.

Completing the Pump:
Pump is supplied complete with stainless hardware, fittings and gaskets. The supplied inlet fitting is for a 1.5 dia hose and the heater / bypass fittings should also match the stock configuration. If your lower radiator hose or other connections are other than stock you may purchase alternate fittings. Please call for details.

Amperage draw:
Under normal use the standard pump will draw 11-12 amps.

Weight:
The WP311 pump weighs 8.6 Lbs.

16 volt systems: When purchasing a pump for a 16 volt system we recommend the 16 volt optional motor on our pump. The 12 volt pump will work for limited use applications.

Picture below is just for reference only, I am selling a Blue one with the correct hose fittings already attatched.

[86GT50]

sold
sold
sold