[jony51999]

I have a 289/302 not really long block (no cylinder heads, but oil pump and Fox body double sump pan are included). It is a 78 302 block with the 8.206 deck height that is .040 over with a Hi-Po 289 rotating assembly, making the total displacement 294. It has forged L2305F .068 dished pistons which will yield about 9:1 comp ratio with a 60CC head and std. .039 gasket, plasma-moly rings, K-code Hi-Po rods and crank, which is the high nodular crank. If you put some aluminum heads and a 150 shot or a supercharger on this, it will run in the 10's all day long in a fox body mustang. This engine was assembled about 5 years ago and never needed to be used, it was a back up. I did use hylomar spray on it which has kept it from rusting at all. The engine is yellow. It was freshly machined by A&A machine shop in Davison before assembly. Make me an offer, a reasonable one... Would be interested in trading for rims/tires for an Audi A4 or other Audi A4 performance stuff.
I have photos but they were too large to upload, e-mail me at jony51999@aol.com and I can send them to you.