Track Day - Beech Bend Raceway KY 9/18/10

JohnC · September 1st, 2010, 09:44 PM

A local forum is having a track day. I was hoping some of the Mustangs and Fords here would like to show up to run. I will be there in my slow 13.5 sec GT if anyone wants to get an automatic win.

Info below...

TENNESSPEED DAY 2010 - Tickets are now on sale! $10 off by ordering in advance!
Tennesspeed Day 2010
Saturday, September 18th 2010
Beech Bend Raceway - Bowling Green, KY

Tickets are now available at a discounted rate for advance purchase. These tickets will be available for advance purchase until Saturday, September 11th -- one week before the event. After that time they will only be available at the gate, for full price.

Tickets ARE transferable. If you cannot make it, you are allowed to sell your ticket to someone else.

Tickets for racing are per driver. If you are bringing more than one vehicle, you are covered. If more than one driver will be racing a vehicle, each driver must have a ticket.

Advance Price: $30.00
At The Gate: $40.00

Please note that a $1.00 charge for postage and and handling will be added to your order. Ticket purchases are non-refundable but are transferable. Track date will be rescheduled in the event of weather. Ticket purchases are typically mailed out once a week. Paypal is the only method by which advance purchase will be offered; sorry.

Spectator admission will be $10 (cash) at the gate. Admission is free for children ages 12 and under.

JohnC · September 9th, 2010, 12:40 PM

I think there will be some quick cars showing up again this year....

Official Tennesspeed Day 2010 Call-out Thread

Originally Posted by qwkpuhkr

Tentatively we plan on being there in the 91GT. The car is still in the operating room getting the new bullet put in. Only thing left is getting the hot side made for the turbo and dyno tuning it. And to answer the last question, this motor made just under 2700 hp with a 106mm on a mustang dyno. You do the math!!!! LOL. Would be happy with 2500 and being able to turn it down for some 4.80's in the 1/8th (on 275's that is).

Mark

JohnC · September 9th, 2010, 12:40 PM

Anyone here want to run me at Beech Bend?

JohnC · September 10th, 2010, 01:10 PM

Track website:

Dragstrip

Beech Bend
798 Beech Bend Road
Bowling Green, KY 42101
Phone (270) 781-7634
Fax (270) 781-0524

JohnC · September 10th, 2010, 08:04 PM

Updated with flyer...

JohnC · September 12th, 2010, 02:22 PM

Time is up for discounted prepaid tickets. Ya got to pay at the gate now.

JohnC · September 13th, 2010, 12:39 PM

More info... they'll have a pro tree for those that care.

JohnC · September 14th, 2010, 11:25 AM

This guy is coming...

Originally Posted by qwkpuhkr

Tentatively we plan on being there. The car is still in the operating room getting the new bullet put in. Only thing left is getting the hot side made for the turbo and dyno tuning it. And to answer the last question, this motor made just under 2700 hp with a 106mm on a mustang dyno. You do the math!!!! LOL. Would be happy with 2500 and being able to turn it down for some 4.80's in the 1/8th (on 275's that is).

Mark

Old vid I found of his car...

Tennesspeed Day 2008 :: Mark87150.flv video by dragon9742 - Photobucket

Originally Posted by qwkpuhkr

Motor fired tonight. Two revs and it lit. Still not sure if we are going tomake it, but trying. Have to get the headers and crossover made for the turbo and then to the dyno.

Mark

JohnC · September 15th, 2010, 01:36 PM

n/m Mark can't make it out.

Originally Posted by qwkpuhkr

I regret to inform everyone that we will not be able to make it up there saturday. Car just wont be ready. We had to order hot parts for the turbo and they are delaying us getting it built.

I do hope everyone has a safe, fun time. Want to see pictures, videos, etc of the action. I will be wishing I could be there running with everyone and HATE that I will be missing the last time TS Day will be held at BG.

Mark

JohnC · September 17th, 2010, 02:24 PM

For those going, see ya'll at the track!!!!!!

6ER THEN I 8ER! · September 17th, 2010, 03:04 PM

I think most mustang guys will be at Nashville Super Speedway that day for the All Ford Car Show and track event

At least the TN Mustang Club will be going again this year...we have to try and beat the Saleen Club again...

Hope you enjoy your track day though

JohnC · September 17th, 2010, 10:59 PM

Originally Posted by 6er_w/a_Vengance

I think most mustang guys will be at Nashville Super Speedway that day for the All Ford Car Show and track event

At least the TN Mustang Club will be going again this year...we have to try and beat the Saleen Club again...

Hope you enjoy your track day though

Makes it better for me! No crowd and I can lap the 1/4 mile to work on my launch and a 1/4 mile best!

Last bump! Come out and have some fun for 7hrs on an uncrowded 1/4 mile track!

Cya there if you come!

JTs03v6 · September 17th, 2010, 11:02 PM

Good luck man. Get some video if ya can. Always like to see stangs go down the track.

JohnC · September 18th, 2010, 12:59 AM

Originally Posted by JTs03v6

Good luck man. Get some video if ya can. Always like to see stangs go down the track.

Thanks, bro.

I know I'll get pics, but not sure how much video we'll get since we're SD card limited and the wife will have to shoot it in 720p HD on a Nikon D90.

I have a video cam, but bringing all that will be too much for her to carry around and guard while I'm racing. :\

September 9th, 2010, 12:40 PM	#3
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	Anyone here want to run me at Beech Bend? __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 10th, 2010, 01:10 PM	#4
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	Track website: Dragstrip Beech Bend 798 Beech Bend Road Bowling Green, KY 42101 Phone (270) 781-7634 Fax (270) 781-0524 __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 10th, 2010, 08:04 PM	#5
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	Updated with flyer... __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 12th, 2010, 02:22 PM	#6
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	Time is up for discounted prepaid tickets. Ya got to pay at the gate now. __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 13th, 2010, 12:39 PM	#7
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	More info... they'll have a pro tree for those that care. __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 17th, 2010, 02:24 PM	#10
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 889 iTrader: 1 reviews	For those going, see ya'll at the track!!!!!! __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

September 17th, 2010, 03:04 PM	#11
6ER THEN I 8ER! Banned Join Date: Apr 2007 Location: Portland, TN Posts: 17,515 iTrader: 3 reviews	I think most mustang guys will be at Nashville Super Speedway that day for the All Ford Car Show and track event At least the TN Mustang Club will be going again this year...we have to try and beat the Saleen Club again... Hope you enjoy your track day though

September 17th, 2010, 11:02 PM	#13
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Good luck man. Get some video if ya can. Always like to see stangs go down the track. __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Track Day - Beech Bend Raceway KY 9/18/10
Thread	Thread Starter	Forum	Replies	Last Post
2009 Track Day Schedule - MVP Track Time	Feffman	Autocross	8	December 31st, 2009 10:58 AM
Atco Raceway Track rental, April 9th	Snipes	Northeast	3	April 8th, 2009 06:53 AM
JDM Engineering day, 11-14-08, Raceway Park NJ	njstang	Northeast	7	December 11th, 2008 02:36 PM
Mustang Day @ Silver Dollar Raceway	RIDIN5.0	Southeast	1	September 20th, 2008 10:06 PM
Track day at Beech Bend in KY!	JohnC	Southeast	0	September 3rd, 2008 05:10 AM

All times are GMT -4. The time now is 06:29 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.