throughin the car sideways

Mikes88 · June 26th, 2007, 10:29 PM

I have a panhard bar on the rear. When i pop the clutch and shift into second the car shoots to the right. People say shitty tires and i need to adjust the panhard bar. An expert opinion would be great. Thanks for looking!

TurboLX · June 27th, 2007, 03:20 PM

it will always do that, its a thing called Torque and torque is good with a posi, making it fun to get sideways

92Rideagain · June 28th, 2007, 01:24 AM

Do you have any other mods to the rear end? If all you have is the bar, you will have to make other mods as well. Better shocks, replace the upper and lower control arms, as well the springs. The 86-93 was probably the worst handling Mustang ever built but you can correct this problem. Look at http://www.griggsracing.com/index.php http://www.maximummotorsports.com/ both companies make great products for your car. You have to know if you want to make a drag or road race car and then but the pieces that make it behave the way you want it to. Good luck.

Baneful · July 1st, 2007, 09:15 PM

I am not sure what phb you have, but this might help you determin if it needs to be adjusted.

http://www.griggsracing.com/pdfFiles/mpb1200.pdf

Wouldn't subframe connecters help as well?

June 26th, 2007, 10:29 PM	#1
Mikes88 Newbie Join Date: Oct 2006 Posts: 24	throughin the car sideways I have a panhard bar on the rear. When i pop the clutch and shift into second the car shoots to the right. People say shitty tires and i need to adjust the panhard bar. An expert opinion would be great. Thanks for looking!

June 27th, 2007, 03:20 PM	#2
TurboLX IT'S TURBO TIME 1990 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,651	it will always do that, its a thing called Torque and torque is good with a posi, making it fun to get sideways __________________ *Put up, Shut up, Line Up And Get Beat Up!!!*

July 1st, 2007, 09:15 PM	#4
Baneful Regular Join Date: Feb 2007 Location: Las Vegas Posts: 118	I am not sure what phb you have, but this might help you determin if it needs to be adjusted. http://www.griggsracing.com/pdfFiles/mpb1200.pdf Wouldn't subframe connecters help as well? __________________ K&N fipk2 CAI, flowmaster 40 cat back, accufab 70mm tb/p, xcal2, 3.73 frpp gears, Steeda Tri-ax, Mach grill del. 255rwhp 295rwtq Needing more

Threads Similar to: throughin the car sideways
Thread	Thread Starter	Forum	Replies	Last Post
SIDEWAYS @ 150 mph in a KA-T powered 240sx vs a T/A on Spray	Mellon	Videos	6	December 20th, 2006 01:01 AM

June 28th, 2007, 01:24 AM	#3
92Rideagain Regular Join Date: Jun 2007 Location: Al Qa'im Iraq Posts: 56	Do you have any other mods to the rear end? If all you have is the bar, you will have to make other mods as well. Better shocks, replace the upper and lower control arms, as well the springs. The 86-93 was probably the worst handling Mustang ever built but you can correct this problem. Look at http://www.griggsracing.com/index.php http://www.maximummotorsports.com/ both companies make great products for your car. You have to know if you want to make a drag or road race car and then but the pieces that make it behave the way you want it to. Good luck.

All times are GMT -4. The time now is 04:32 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.