Whats a good welder to get to weld my Roll Cage?

noyz25 · March 4th, 2008, 09:58 PM

Just was wondering whats a good but not too costly welder to get to weld up my roll cage?

05stanggta · March 5th, 2008, 11:26 PM

are you wanting to MIG weld it or TIG weld it? also what kind of tubing are you using for your roll cage? if you are using chromoly tubing, you will want to TIG weld it. if you are using DOM or HREW tubing, MIG would work just fine. if you go to Welding Mart - Your Superstore for Lincoln welding equipment and supplies! they have some good deals on some small Lincoln welders. Lincoln is a very good and highly respected brand. any welder that you go with will cost a few hundred dollars. i have seen a light duty lincoln TIG welder for about 700 dollars. and a light duty MIG for about 530 dollars. also just a suggestion, it wouldnt hurt to invest in a good welder for future use. hope this helps.

March 4th, 2008, 09:58 PM	#1
noyz25 Regular Join Date: Jul 2007 Posts: 82	Whats a good welder to get to weld my Roll Cage? Just was wondering whats a good but not too costly welder to get to weld up my roll cage?

March 5th, 2008, 11:26 PM	#2
05stanggta Regular 2005 Mustang GT Join Date: Dec 2007 Location: Twin Falls, ID Posts: 165	are you wanting to MIG weld it or TIG weld it? also what kind of tubing are you using for your roll cage? if you are using chromoly tubing, you will want to TIG weld it. if you are using DOM or HREW tubing, MIG would work just fine. if you go to Welding Mart - Your Superstore for Lincoln welding equipment and supplies! they have some good deals on some small Lincoln welders. Lincoln is a very good and highly respected brand. any welder that you go with will cost a few hundred dollars. i have seen a light duty lincoln TIG welder for about 700 dollars. and a light duty MIG for about 530 dollars. also just a suggestion, it wouldnt hurt to invest in a good welder for future use. hope this helps. __________________ http://www.myspace.com/05stanggta

Threads Similar to: Whats a good welder to get to weld my Roll Cage?
Thread	Thread Starter	Forum	Replies	Last Post
Roll cage???	flamed 98 gt	5.0 Mustangs	25	February 15th, 2008 05:13 PM
roll bar/cage	SWEET2KSTANG	99-04	40	January 29th, 2008 04:52 AM
FS Competition Eng. Roll cage.	Stangzilla	For Sale	1	January 8th, 2008 12:22 AM
roll cage install	ttop5.0	Drag	12	September 7th, 2007 04:31 PM
what speed do you need a roll cage?	jessy_is_rad	Drag	12	April 8th, 2007 02:09 AM

All times are GMT -4. The time now is 07:46 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.