Suspension Rattle

gixxerkidd1 · March 26th, 2008, 02:08 PM

I have a 03 GT with H&R Supersports and 3-bolt Caster/Camber Kits with bumpsteer kit. Since I installed all the suspension parts I have a rattle in the front shock tower, the left does it a little but mostly on the right side...the noise sounds high in the tower. Has anyone ever had this problem before? It is bugging the crap out of me, every time I hit a bump and the suspension bounds it pops. I checked, double checked, and triple checked all the bolts, looked for rub spots on paint and cant come up with anything...SOMEONE PLEASE HELP, ITS DRIVING ME NUTS.

Blainestang · March 26th, 2008, 02:36 PM

Originally Posted by gixxerkidd1

I have a 03 GT with H&R Supersports and 3-bolt Caster/Camber Kits with bumpsteer kit. Since I installed all the suspension parts I have a rattle in the front shock tower, the left does it a little but mostly on the right side...the noise sounds high in the tower. Has anyone ever had this problem before? It is bugging the crap out of me, every time I hit a bump and the suspension bounds it pops. I checked, double checked, and triple checked all the bolts, looked for rub spots on paint and cant come up with anything...SOMEONE PLEASE HELP, ITS DRIVING ME NUTS.

-Rattle
-High in the tower
- Bolts are tight
- Not rubbing

Sounds like it could be a bad bearing. The cheaper 3-bolt kits are notorious for this, although it happens to the best of them.

gixxerkidd1 · March 26th, 2008, 08:10 PM

Sweet!!! That is what I was thinking, I just didnt know what else it could be, and the 3-bolt kit is nearly brand new. Do you have a suggestion for a good 4-bolt? I would spend a thousand dollars on a set right now just for that pop/rattle to go away!!! Thanks alot Blaine.

Also, is it normal for the cheaper 3-bolts to not correct the camber back to factory? The ones I got are still 2 degrees from center after pulling them all the way to the outside :-( 150 bucks down the drain.

Blainestang · March 27th, 2008, 09:20 AM

Originally Posted by gixxerkidd1

Sweet!!! That is what I was thinking, I just didnt know what else it could be, and the 3-bolt kit is nearly brand new. Do you have a suggestion for a good 4-bolt? I would spend a thousand dollars on a set right now just for that pop/rattle to go away!!! Thanks alot Blaine.

Also, is it normal for the cheaper 3-bolts to not correct the camber back to factory? The ones I got are still 2 degrees from center after pulling them all the way to the outside :-( 150 bucks down the drain.

Maximum Motorsports 4-bolt plates are by far the most recommended ones, and I would personally recommend them as I have a set (on my Fox) that have taken a beating and still work great. Every once in a while, even the MM ones have problems, but in my experience, at a much lower rate than the other brands.

And yes, I've heard of problems like yours with the cheaper 3-bolt plates fairly regularly. I would contact the manufacturer and see if they might give you a refund or replace them so you can sell a NEW set and buy some MM ones

Just to be clear, obviously I don't KNOW that the bearing is the problem, but it SOUNDS like that's probably the case

gixxerkidd1 · March 29th, 2008, 01:21 AM

Cool, well either way your help is greatly appreciated!!! Ill give it a shot and post back the results! Thanks again.

haines3rh · May 1st, 2008, 01:53 AM

.

Averlus · May 12th, 2008, 07:06 AM

I'm having a similiar problem. I hear a thunk noise whenever I apply the brakes. It's coming from the front right side. Also when I turn the wheel either way a lot I can hear a strange noise. Not quite sure how to describe it, but I can feel the feedback through the steering wheel. I'm wondering if I failed to sufficiently tighten some bolts or maybe too tight or something...

goren420 · June 4th, 2008, 01:09 PM

I just recently put MM caster/camber plates on and after the first test drive heard similar noises ... the thunking. Originally I thought it was the springs settling in which I had just put on at the same time. Come to find out after getting it back in the garage that the struts were too high and hitting the underside of the hood. The MM plates come with spacers which are easily adjusted from top to bottom and I fixed the problem.

Just maybe check this out before you go returning/replacing any parts, don't know if other brands use the same spacer system but it's worth a look.

March 26th, 2008, 02:08 PM	#1
gixxerkidd1 Newbie 2003 Mustang GT Join Date: Nov 2007 Location: Warner Robins, Georgia Posts: 14	Suspension Rattle I have a 03 GT with H&R Supersports and 3-bolt Caster/Camber Kits with bumpsteer kit. Since I installed all the suspension parts I have a rattle in the front shock tower, the left does it a little but mostly on the right side...the noise sounds high in the tower. Has anyone ever had this problem before? It is bugging the crap out of me, every time I hit a bump and the suspension bounds it pops. I checked, double checked, and triple checked all the bolts, looked for rub spots on paint and cant come up with anything...SOMEONE PLEASE HELP, ITS DRIVING ME NUTS.

May 12th, 2008, 07:06 AM	#7
Averlus Regular 2007 4.0 slow Join Date: Nov 2007 Location: Schofield Barracks, HI Posts: 276	I'm having a similiar problem. I hear a thunk noise whenever I apply the brakes. It's coming from the front right side. Also when I turn the wheel either way a lot I can hear a strange noise. Not quite sure how to describe it, but I can feel the feedback through the steering wheel. I'm wondering if I failed to sufficiently tighten some bolts or maybe too tight or something... __________________ E-bay CAI H-pipe/flowmasters40's/3" slant-cut tips http://www.veoh.com/videos/v4150679NMr4r4n6

Threads Similar to: Suspension Rattle
Thread	Thread Starter	Forum	Replies	Last Post
rattle	OneBoredGuy	4V / SVT	5	February 29th, 2008 08:41 PM
rattle	Nameless122	V6 Mustangs	3	August 11th, 2007 04:38 PM
Rattle.....	BrentS16	V6 Mustangs	8	July 18th, 2007 07:42 PM
rattle rattle	mu5t4ng	96-98	14	January 5th, 2007 06:20 PM
Rattle	JRubin2000	99-04	12	September 11th, 2006 05:52 PM

March 26th, 2008, 08:10 PM	#3
gixxerkidd1 Newbie 2003 Mustang GT Join Date: Nov 2007 Location: Warner Robins, Georgia Posts: 14	Sweet!!! That is what I was thinking, I just didnt know what else it could be, and the 3-bolt kit is nearly brand new. Do you have a suggestion for a good 4-bolt? I would spend a thousand dollars on a set right now just for that pop/rattle to go away!!! Thanks alot Blaine. Also, is it normal for the cheaper 3-bolts to not correct the camber back to factory? The ones I got are still 2 degrees from center after pulling them all the way to the outside :-( 150 bucks down the drain.

March 29th, 2008, 01:21 AM	#5
gixxerkidd1 Newbie 2003 Mustang GT Join Date: Nov 2007 Location: Warner Robins, Georgia Posts: 14	Cool, well either way your help is greatly appreciated!!! Ill give it a shot and post back the results! Thanks again.

May 1st, 2008, 01:53 AM	#6
haines3rh Newbie Join Date: May 2008 Posts: 11	.

June 4th, 2008, 01:09 PM	#8
goren420 Regular '00 3.8L Join Date: Apr 2008 Location: Odessa, FL Posts: 52	I just recently put MM caster/camber plates on and after the first test drive heard similar noises ... the thunking. Originally I thought it was the springs settling in which I had just put on at the same time. Come to find out after getting it back in the garage that the struts were too high and hitting the underside of the hood. The MM plates come with spacers which are easily adjusted from top to bottom and I fixed the problem. Just maybe check this out before you go returning/replacing any parts, don't know if other brands use the same spacer system but it's worth a look.

All times are GMT -4. The time now is 10:46 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.