SVO Parts List

quikstang2 · August 20th, 2006, 10:55 PM

I don't have an SVO, but I wish I did. I do have an '84 coupe that I'm restoring and I haven't begun on the exterior yet. I personally like the coupes better than the hatchbacks, but I like the SVO more than the other Mustangs so I figured I'd try and get the best of both worlds and slap as much '84 SVO exterior on my coupe as possible.
Recently I've seen headlight rings, fiberglass hood, hood scoop insert, turn lights, parking lights, front bumper, emblems, decals and side rubber strip.
A while back I saw a fiberglass headlight reinforcement panel and the side skirt (flares) but I can't find them anymore.
I haven't seen the sail panel or spoiler, which wouldn't work on a coupe anyways. I'll have to fab those up on my own or do something else.
What else would I need? And where can I get this stuff?
I'd really like to use as much aftermarket or non-original stuff as I can because I'd like to leave the original stuff for the real SVOs. I'm considering learning how to fiberglass so I can make more of this stuff so other people can make clones or put their original stuff in a safe place so it doesn't get wrecked.
thanks,
mike

quikstang2 · August 22nd, 2006, 07:17 PM

Just to make it clear, because I've run into issues on another forum, I AM NOT attempting to part out any real SVOs or use any original SVO parts. I'm trying to use only aftermarket reproduction parts. If I need a real part to make a mold so I can make more after market parts, then I'll do that and resell the original part to someone with a real SVO. If I run into anyone parting out an SVO, I will report them and/or try to buy the entire car to save it.
I also learned that making clones is discouraged. Aside from liking the looks I would like to show it to as many people as possible in attempt to make the SVO more popular so that reproduction parts might be manufactured once more.
I'm a fan of the SVO and I only have good intentions with my project. If anyone feels that I am doing more harm than good, let me know and I will reconsider my project (I'm going out of my way to do it anyways).

WVSNS& · September 15th, 2006, 08:10 AM

I have a driveshaft that came from an 86 svo. Cannot throw it away.

john

quikstang2 · September 15th, 2006, 05:49 PM

I was really just looking for exterior parts.
I'm pretty sure the drive shaft is the same as the other ones, if not check with SVOCA and see if anyone else could use it.

thanks anyways.

Darrellx14 · December 11th, 2006, 04:40 PM

I have an original '84 SVO hood, and a factory rear SVO bumper, SVO wheels, SVO dash with 140mph speedo.

quikstang2 · December 11th, 2006, 07:42 PM

I'm kinda strapped for cash at the moment as I'm trying to sell off my drums for a new set, but how much are you looking to get for the individual parts?
I could use them to make molds.

TurboLX · December 29th, 2006, 03:27 PM

there was this body shop down the street from my shop that has an svo they tore completly down
they have the louvers an fenders still but im not sure what else they have

quikstang2 · December 29th, 2006, 09:50 PM

That's a shame.
Do you know their number or anything? Just send me a PM.
thanks.

TurboLX · January 25th, 2007, 09:15 AM

i will get some info

August 20th, 2006, 10:55 PM	#1
quikstang2 Newbie Join Date: Jul 2006 Location: Pompano Beach, FL Posts: 17	SVO Parts List I don't have an SVO, but I wish I did. I do have an '84 coupe that I'm restoring and I haven't begun on the exterior yet. I personally like the coupes better than the hatchbacks, but I like the SVO more than the other Mustangs so I figured I'd try and get the best of both worlds and slap as much '84 SVO exterior on my coupe as possible. Recently I've seen headlight rings, fiberglass hood, hood scoop insert, turn lights, parking lights, front bumper, emblems, decals and side rubber strip. A while back I saw a fiberglass headlight reinforcement panel and the side skirt (flares) but I can't find them anymore. I haven't seen the sail panel or spoiler, which wouldn't work on a coupe anyways. I'll have to fab those up on my own or do something else. What else would I need? And where can I get this stuff? I'd really like to use as much aftermarket or non-original stuff as I can because I'd like to leave the original stuff for the real SVOs. I'm considering learning how to fiberglass so I can make more of this stuff so other people can make clones or put their original stuff in a safe place so it doesn't get wrecked. thanks, mike __________________ 2000 Ranger XLT 2.5L WANTED: '79-93 Mustang notch 2.3L 5-speed

August 22nd, 2006, 07:17 PM	#2
quikstang2 Newbie Join Date: Jul 2006 Location: Pompano Beach, FL Posts: 17	Just to make it clear, because I've run into issues on another forum, I AM NOT attempting to part out any real SVOs or use any original SVO parts. I'm trying to use only aftermarket reproduction parts. If I need a real part to make a mold so I can make more after market parts, then I'll do that and resell the original part to someone with a real SVO. If I run into anyone parting out an SVO, I will report them and/or try to buy the entire car to save it. I also learned that making clones is discouraged. Aside from liking the looks I would like to show it to as many people as possible in attempt to make the SVO more popular so that reproduction parts might be manufactured once more. I'm a fan of the SVO and I only have good intentions with my project. If anyone feels that I am doing more harm than good, let me know and I will reconsider my project (I'm going out of my way to do it anyways). __________________ 2000 Ranger XLT 2.5L WANTED: '79-93 Mustang notch 2.3L 5-speed

September 15th, 2006, 08:10 AM	#3
WVSNS& Regular 2001 Mustang Cobra Join Date: Dec 2005 Location: va beach Posts: 188	svo parts I have a driveshaft that came from an 86 svo. Cannot throw it away. john __________________ 01 Cobra Jlt Cai,BBk Lt's/cut- outs,mids/cats,magnaflows. Twin 65tb.

September 15th, 2006, 05:49 PM	#4
quikstang2 Newbie Join Date: Jul 2006 Location: Pompano Beach, FL Posts: 17	I was really just looking for exterior parts. I'm pretty sure the drive shaft is the same as the other ones, if not check with SVOCA and see if anyone else could use it. thanks anyways. __________________ 2000 Ranger XLT 2.5L WANTED: '79-93 Mustang notch 2.3L 5-speed

December 11th, 2006, 04:40 PM	#5
Darrellx14 Regular Join Date: Jul 2006 Posts: 82	I have an original '84 SVO hood, and a factory rear SVO bumper, SVO wheels, SVO dash with 140mph speedo. __________________ '87 Mustang 5.0 T5 Coupe New motor I/P: stock shortblock Edelbrock heads Typhoon Intake 70mm TB 80mm MAF 24lbers 1.7 rr B303 cam. Shooting for 300rwhp?

December 11th, 2006, 07:42 PM	#6
quikstang2 Newbie Join Date: Jul 2006 Location: Pompano Beach, FL Posts: 17	I'm kinda strapped for cash at the moment as I'm trying to sell off my drums for a new set, but how much are you looking to get for the individual parts? I could use them to make molds. __________________ 2000 Ranger XLT 2.5L WANTED: '79-93 Mustang notch 2.3L 5-speed

December 29th, 2006, 03:27 PM	#7
TurboLX MM Ninjas! 1990 Mustang LX Turbo 8.675 @ 165.91 Join Date: Oct 2006 Location: New York Posts: 7,899	there was this body shop down the street from my shop that has an svo they tore completly down they have the louvers an fenders still but im not sure what else they have __________________ (Wiring Diagrams For ALL Mustangs And OBDII/Generic DTC Available. PM For Info) FORD 2.3 FORUMS

December 29th, 2006, 09:50 PM	#8
quikstang2 Newbie Join Date: Jul 2006 Location: Pompano Beach, FL Posts: 17	That's a shame. Do you know their number or anything? Just send me a PM. thanks. __________________ 2000 Ranger XLT 2.5L WANTED: '79-93 Mustang notch 2.3L 5-speed

January 25th, 2007, 09:15 AM	#9
TurboLX MM Ninjas! 1990 Mustang LX Turbo 8.675 @ 165.91 Join Date: Oct 2006 Location: New York Posts: 7,899	i will get some info __________________ (Wiring Diagrams For ALL Mustangs And OBDII/Generic DTC Available. PM For Info) FORD 2.3 FORUMS

Threads Similar to: SVO Parts List
Thread	Thread Starter	Forum	Replies	Last Post
$1700 parts list	motorhead6776	V6 Mustangs	24	October 6th, 2007 05:37 PM
LIST OF PARTS IN ORDER	marcfiebka	99-04	3	July 15th, 2007 09:01 PM
Parts List	jblood37	99-04	8	April 14th, 2007 05:53 PM
parts suggestions list	laserstang2	96-98	3	February 10th, 2007 11:44 PM
My Performance Parts List	Chris02	99-04	14	November 1st, 2006 06:10 PM

All times are GMT -4. The time now is 05:48 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

SVO Parts List

SVO Parts List

svo parts