| ![]() | ||||||||||||
| |||||||||||||
|
|||||||
Discussing New Product- Upper Control Arm Spacers in the UMI Performance Forum. This spacer kit manufactured by UMI Performance is designed to fix the oversized hole problem ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
|
|
#1 |
|
Authorized Vendor
![]() Join Date: Sep 2009
Posts: 32
|
New Product- Upper Control Arm Spacers
This spacer kit manufactured by UMI Performance is designed to fix the oversized hole problem with the factory rear upper control arm mount. Where the rear upper control arm mounts to the chassis Ford uses a 14mm bolt and a 14mm hole in the upper control arm, however the hole in the chassis mount is 16mm. This stepped spacer set is designed to take up this slop and eliminate noise and clunks from the upper control arm area. This is done by reducing the hole size from 16mm to 14mm which does not allow the bolt to shift during acceleration and braking. The spacer kit slides into the upper mount and steps the hole size down to the correct diameter of 14mm, this allows for a tighter fit and no more clunking!
Price at only $7.99 If you have any questions please ask. Thanks! Ryan 2005-2010 Ford Mustang Upper Control Arm Mount Stepped Spacers [1058] - $7.99 : UMI Performance, Inc. ![]()
__________________
Ryan UMI Performance Inc www.umiperformance.com ryan@umiperformance.com 814.857.5400 |
| Sponsored Links | Remove Advertisements |
| Forums at Modded Mustangs Advertisement |
|
|
#2 |
|
Newbie
Join Date: Dec 2009
Posts: 21
|
why would ford do something that stupid ?
|
![]() |
| Thread Tools | |
|
|
Threads Similar to: New Product- Upper Control Arm Spacers
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Product- Control Arm Relocation Brackets | UMI Performance | UMI Performance | 0 | September 11th, 2009 10:10 AM |
| Upper Control Arm | usafimj | 2005 - 2009 | 36 | October 1st, 2008 09:35 PM |
| Upper Control Arm Install | ThreeHonks302 | 5.0 Mustangs | 10 | August 11th, 2008 10:35 PM |
| Install Upper control arm.. | 2006greyGT | 2005 - 2009 | 7 | March 23rd, 2008 08:28 PM |
| Should I Replace My Upper Control Arm | Faulconer | 2005 - 2009 | 6 | June 13th, 2007 11:59 PM |