[330CubeGt]

1996 V6 Beater
I have About $300 to play with and wanted to do a lil somthing to my daily driver since my other car is just about done.

Im getting ready to have the windows tinted and i got a new door for the pass side that got hit.
Im getting a Stock 99+ at back from a buddie for cheap so im going to have to fab hangers for the rear and my own h pipe from the looks of it.then the $300 i wanted to spend to make it run a lil better and look better so i was thinking some wheel spacers to offset the 05 gt wheels and give it that wider stance.A nice Set of headlights,I was also thinking a nice coil pack with some nice wires and NGK Plugs Possibly even a Ebay cold air,What would be Cheap But good Ignition setup for it?also thinking about lowering it what is a nice rideing cheap spring. I was looking at some Tenso R progressive rates for 130 shipped but dont know if there anygood.

Been out of the V6 loop for a while so just wondering your guys opinion and thoughts on what you would do to help guide my decision.

[itschristorres8]

ebay intake and just throw the rest in suspension.
any 79-04 suspension is MOSTLY all compatible

[Onemanzu]

buy some beer and have a party. 300 wont get you anywhere on your stang that will make you happy

[graystang01]

300 will get you a decent exhaust. thats all i paid for mine

[stangcharger]

Originally Posted by itschristorres8 ebay intake and just throw the rest in suspension. any 79-04 suspension is MOSTLY all compatible

+1

300 wont get you far enough to matter hp wise. but could do some nice suspension if you do it yourself.

[330CubeGt]

Lol you guys are to much .All my money is tied up in my 98 5.4 car.Im just about done with it so i want somthing for the Beater Car now i only paid 900 for it and although its clean im not looking for Power by no means i just figured i have a Almost complete dual exhaust for it that i got for Next to nothing and it needs some things like a tune up and headlights but i was thinking of lowering it im not trying to make it a AutoCross car so Cheap springs are ideal i just dont want to get a cheap spring and have it bouncing down the road.Mabye some rear wheel spacers so the wheels fit flush mabye Windows will be tinted shortly after x-mas i hope when i install the new door.
And i dont want to change the gears or anything i like my gas mileage lol.

[330CubeGt]

This is what the car look like .

[stangcharger]

Ford Racing Springs (C-Springs) at AmericanMuscle.com - Free Shipping!

C-springs are what i have on mine and i love them.

[330CubeGt]

I was thinking C springs but i dont know if ill have that cash.

I have 250 Ish right now
Headlights are like 70 shipped
I need both side view mirrors 60 shipped
And i think im getting the 1inch or 1-1/4 rear wheel spacers there $60-$70 shipped.
As far as the exhaust im getting a 99+ complete cat back for $20 of a Friend and im going to try and use that stock Gt h pipe back half to join the y ipe and the h pipe to make it work as cheap as possible.

So for right now im going to have 50 left And i am leaning twards Ngk Plugs New Wires And a Oil change etc.

then im thinking about cuttin a half a coil off the stock springs or possibly cutting the stock gt springs i have and puttin them in. I only want to lower it a little bit. so idk what to do just yet.Mabye ill just have to get a little more together and get the C springs.

Any one sell i good aftermarket coil pack?

[stangdriven]

300 dollars, better just save some more money, but suspensio wise, i went with tockico struts and shocks, and i like em, went with h&r springs and i love that setup, made the car look nasty and handles great....xcal2 will definitely be worth the money, id get gears in the rear with a posi, dont go ford tlock for the 7.5 i blew mine already and wears down way to fast....get like a detroit tru trac, there amazing...gears, auto 410's / 5spd 373's....if you want to know more just the small things that added up with me let me know, cause i was able to take down gt's left and right.....