Forums at Modded Mustangs
Home Register FAQ Members List Calendar Blogs Garage Gallery Search Today's Posts Mark Forums Read


Go Back   Forums at Modded Mustangs > Mustang Forums > V6 Mustangs
Reload this Page

Spoiler Delete


Discussing Spoiler Delete in the V6 Mustangs Forum. ... thiers no one spot thats 100% safe... the only thing i can say is try ...

       

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

Page 2 of 4 < 1 2 34 >
 
LinkBack Thread Tools
Old January 8th, 2007, 11:01 PM   #21
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
... thiers no one spot thats 100% safe... the only thing i can say is try and mount them on plexi glass and then mount that to your car... kinda like a skid plate...

also the tint thing differs from state to state... personally go down to the HQ and ask for a policeofficer that isn't busy and might now about tints and street glow's ... they should be happy to help you... cuz they are getting paid either way...
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:01 PM   #22
Enthusiast
 
 
Join Date: Jan 2007
Location: Manhattan, Kansas
Posts: 760
Default
i meant if its illegal to black them out in kansas..my bad
__________________
If you aren't first.....your last!

http://i148.photobucket.com/albums/s...7_19/Bsig2.jpg
 
Old January 8th, 2007, 11:03 PM   #23
Enthusiast
 
 
Join Date: Jan 2007
Location: Manhattan, Kansas
Posts: 760
Default
u mean like wrap them around the plexiglass kinda sorta???
 
Old January 8th, 2007, 11:08 PM   #24
Hardcore Enthusiast
 
2000 V6
 
Join Date: Jan 2007
Location: Albuquerque
Posts: 2,410
Default
You would probably be ok with tinting the head and tails, just not too dark
__________________
2000 V6
Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive crank pulley, SCT tune,
and a buncha cosmetic mods
 
Old January 8th, 2007, 11:11 PM   #25
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
like i said go ask the local PD...

and i think only on the bottom would be allright.. it might be a lot of fabin up but if you don't want them to break that might be your safest bet... on a dirt road... thiers a bit of room between the frame rain and the spare jack lip ... you might be able to fab something to go in their
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:11 PM   #26
Regular
 
baron's Avatar
 
92 Mustang LX
 
Join Date: Nov 2006
Location: 405
Posts: 117
Default
Originally Posted by Onemanzu
hell fuckin kill you dude... don't fuck with him... hell cut you in the throat... gut you like a fuckin pig...

plus its not nice to say dude... your fuckin wrong... on something that is 100% opinion...

ass
dude i eat kids like you for breakfast lol
 
Old January 8th, 2007, 11:14 PM   #27
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
... dude your nuts i was tryin to back u... but go ahead shot your self in the fuckin foot...

dude v6smoker is back
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:16 PM   #28
Enthusiast
 
 
Join Date: Jan 2007
Location: Manhattan, Kansas
Posts: 760
Default
maybe i'll just mount them normal and go extra slow on gravel roads....i live in the middle of no where..but i dont take gravel ALL that much..so i might be able to do it...
__________________
If you aren't first.....your last!

http://i148.photobucket.com/albums/s...7_19/Bsig2.jpg
 
Old January 8th, 2007, 11:18 PM   #29
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
aight good luck...
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:26 PM   #30
Regular
 
2003 Mustang GT
 
Join Date: Oct 2006
Location: chesterfield, VA
Posts: 248
Default
for the spoiler delete go to lowes and get some metal screen and mount it to the inside of the trunk anf then sand down the paint near the holes to metal and be sure to scuff the metal a little so the bondo has something to grab on to then sand it all flush prime it and paint it and your done
__________________
70mm t/b, plenum, cast intake manifold, full magnaflow exhaust, JLT cai, FRPP c springs, anti roll kit, steeda upper control arms, custom tune, subframe connectors, HID headlights, mach 1 chin spoiler
 
Old January 8th, 2007, 11:27 PM   #31
Enthusiast
 
 
Join Date: Jan 2007
Location: Manhattan, Kansas
Posts: 760
Default
i gotta nother ? on exhausts..sorry man i've been wondering alotta stuff...i gotta lotta time on my hands during school to think of stuff to do to it...if i get dual flowmasters....my bumper wont be right...so would i jsut got ot a junk yard and ask them for one....but then i come to the problem if its the wrong color i have to have that painted..and thats gonna cost...some money....or would it be easier to run them out to the side...i've seen it done and it dont look too bad...but then my bumper would be dumb anyones cuz i'll have one exhaust hole cut...and their wont be a pipe there...so im stuck there too!
__________________
If you aren't first.....your last!

http://i148.photobucket.com/albums/s...7_19/Bsig2.jpg
 
Old January 8th, 2007, 11:31 PM   #32
Regular
 
2003 Mustang GT
 
Join Date: Oct 2006
Location: chesterfield, VA
Posts: 248
Default
actuall most exhaust kits for the v6 dont have clearnace issues with the bumper so you should be fine unless you are trying to make it look like a gt then yes you will need to get the new bumper and have it painted to match if it isnt the same color already
__________________
70mm t/b, plenum, cast intake manifold, full magnaflow exhaust, JLT cai, FRPP c springs, anti roll kit, steeda upper control arms, custom tune, subframe connectors, HID headlights, mach 1 chin spoiler
 
Old January 8th, 2007, 11:32 PM   #33
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
... you could go to a junk yard...

you could try and find a template and try to cut out the other side

you could get side exit exhaust or pre axle dumps... that just trun down right behind the mufflers and before the axel... thats what ima end up doing and keeping the stock tip... that way it looks like a sleeper
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:34 PM   #34
Regular
 
2003 Mustang GT
 
Join Date: Oct 2006
Location: chesterfield, VA
Posts: 248
Default
yeah but it wont pass inspection
__________________
70mm t/b, plenum, cast intake manifold, full magnaflow exhaust, JLT cai, FRPP c springs, anti roll kit, steeda upper control arms, custom tune, subframe connectors, HID headlights, mach 1 chin spoiler
 
Old January 8th, 2007, 11:35 PM   #35
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
... what year stang do you have... the 99 and up have a different rear bumper...

thats what the only difference is... and ... do you have inspections in kansas?? i don't here in nebraska soo
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Old January 8th, 2007, 11:36 PM   #36
Hardcore Enthusiast
 
2000 V6
 
Join Date: Jan 2007
Location: Albuquerque
Posts: 2,410
Default
How would it not pass...
__________________
2000 V6
Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive crank pulley, SCT tune,
and a buncha cosmetic mods
 
Old January 8th, 2007, 11:38 PM   #37
Regular
 
2003 Mustang GT
 
Join Date: Oct 2006
Location: chesterfield, VA
Posts: 248
Default
because in pretty much every state your exhaust has to come past the rear axle........... trust me i just got a ticket for it
__________________
70mm t/b, plenum, cast intake manifold, full magnaflow exhaust, JLT cai, FRPP c springs, anti roll kit, steeda upper control arms, custom tune, subframe connectors, HID headlights, mach 1 chin spoiler
 
Old January 8th, 2007, 11:42 PM   #38
Hardcore Enthusiast
 
2000 V6
 
Join Date: Jan 2007
Location: Albuquerque
Posts: 2,410
Default
I have never heard of that law before
__________________
2000 V6
Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive crank pulley, SCT tune,
and a buncha cosmetic mods
 
Old January 8th, 2007, 11:43 PM   #39
Enthusiast
 
 
Join Date: Jan 2007
Location: Manhattan, Kansas
Posts: 760
Default
uhh..i got an 2003 mustang.....i want duals...but i dont want to have to go through all that work...would it sound alot different if i just had a single and did what your talking..keeping the factory exhaust tip and doing the pre exhaust dumps or whatever...
__________________
If you aren't first.....your last!

http://i148.photobucket.com/albums/s...7_19/Bsig2.jpg
 
Old January 8th, 2007, 11:44 PM   #40
MM Phantom
 
Onemanzu's Avatar
 
 
Join Date: Oct 2006
Location: looking for free hand jobs in poland springs nebraska... silly gooses
Posts: 11,163
Default
... well im not gonna get pulled over then... theirs this stang that works down the road from me that has side exit exhaust...

call roush or who ever sells it and they could tell you what states its legal in...

uhh... speaking of the stang down the street... it doesn't have any gt or cobra badges on the fender up front just a stang with the three bars behind it...
__________________
Back for brotherly love. My thoughts are with you Bubba!! [9-23-08]

Originally Posted by omz
 
Reply
Page 2 of 4 < 1 2 34 >



Thread Tools


Threads Similar to: Spoiler Delete
Thread Thread Starter Forum Replies Last Post
grille delete and chin spoiler Nick_Rapitis Crazylegs Racing 1 August 30th, 2007 07:11 PM
spoiler delete 00GT Visual 7 July 27th, 2007 03:24 AM
sorry but i need some spoiler delete help! adamo41188 99-04 9 February 10th, 2007 02:43 AM
Spoiler Delete ThePonyExpress V6 Mustangs 54 February 1st, 2007 12:34 PM
Spoiler Delete MySallyMI 99-04 17 September 17th, 2006 10:31 PM


All times are GMT -4. The time now is 05:28 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company.
Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.