Erm speed regulater...?

Powernewb1 · April 7th, 2009, 02:26 AM

So i was in a Freeway race the other day with a 300zx after puting in my gears ad tlok and a new clutch and short shifter we sarted from the light and went up the entrance i smoked himm basicaly the hole way... but then my regulater kicked in at about 130 or so and he ended up passing me at high end speed... BAH!

very frustrating any ideas on how i should go about removing this?

ByPopularDemand · April 7th, 2009, 02:34 AM

I think you mean the govenor, which kicks in at 118 on our sixers. It can be removed with a chip or tuner.

Powernewb1 · April 7th, 2009, 02:40 AM

yes thats what i was meaning the govenor, but ok so a chip or tuner ah i know i can a tuner online right but is the chip less expensive and also where would i go to get this done just a basic automotive place?

WLJohnson05 · April 7th, 2009, 02:52 AM

to remove your governor u can use a chip or a tuner, but here on the forums we do not allow illegal street racing to be discussed here, thread closed.

April 7th, 2009, 02:26 AM	#1
Powernewb1 Newbie Join Date: Mar 2009 Posts: 18 iTrader: 0 reviews	Erm speed regulater...? So i was in a Freeway race the other day with a 300zx after puting in my gears ad tlok and a new clutch and short shifter we sarted from the light and went up the entrance i smoked himm basicaly the hole way... but then my regulater kicked in at about 130 or so and he ended up passing me at high end speed... BAH! very frustrating any ideas on how i should go about removing this?

April 7th, 2009, 02:34 AM	#2
ByPopularDemand Hardcore Enthusiast 2000 V6 Join Date: Jan 2007 Location: Albuquerque Posts: 2,670 iTrader: 0 reviews	I think you mean the govenor, which kicks in at 118 on our sixers. It can be removed with a chip or tuner. __________________ 2000 V6 vert Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive pulley(r.i.p), SCT tune, 8.8 rear and 4.10 gears.

April 7th, 2009, 02:52 AM	#4
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,106 iTrader: 8 reviews	to remove your governor u can use a chip or a tuner, but here on the forums we do not allow illegal street racing to be discussed here, thread closed. __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: Kenwood Head Unit $155 SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

Threads Similar to: Erm speed regulater...?
Thread	Thread Starter	Forum	Replies	Last Post
1966, 289 with 3 speed trans. . wand to upgrade to 4 or 5 speed, any suggestions??	HORSMEN1995	Classic Mustangs	6	February 20th, 2009 03:23 PM
6 speed for 89 gt	cburns	5.0 Mustangs	13	November 30th, 2008 10:25 AM
i see how it is speed	gooberhead320	The Clubhouse	4	November 19th, 2008 12:36 AM
six speed for 5.0	White Thunder	5.0 Mustangs	14	October 24th, 2007 03:02 PM
6 speed	Mustang RacR94	V6 Mustangs	6	September 29th, 2007 11:57 AM

April 7th, 2009, 02:40 AM	#3
Powernewb1 Newbie Join Date: Mar 2009 Posts: 18 iTrader: 0 reviews	yes thats what i was meaning the govenor, but ok so a chip or tuner ah i know i can a tuner online right but is the chip less expensive and also where would i go to get this done just a basic automotive place?

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 06:59 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.