[horizontalkev]

I'm going to sea foam my mustang and I'm not exact sure where the vacuum hose is on my 2000 mustang, engines stock....
Can someone please give me in detail, where this hose is?

[2002 BLK GT]

Put it on the pcv hose..... it will be better than putting it on the gas tank etc.

[horizontalkev]

Where and what is the pvc hose? Is this the hose that people on youtube put it into?

[2002 BLK GT]

If they say its the pcv hose then yes, lay try to find a pic for ya...

[mooses]

Originally Posted by horizontalkev Where and what is the pvc hose? Is this the hose that people on youtube put it into?

Find the black hose running from the driver side valve cover to the top of the intake manifold. There's only 1 hose on the valve cover, so it shouldn't be hard to find. Pull it out of the valve cover and suck the seafoam in slowly while the engine is running.

[horizontalkev]

When I tried to first sea foam my mustang I put it in a different hose...
The hose I put it in was on the passanger side, it was a hose coming from the upper air intake to like the bottom part of the engine.. I just slipped off the hose on the air intake side and it was a 'vacuum' and I put 1/3 sea foam there, the engine didn't do a lot of wanting to die and I shut it off and when I started it 5 minutes later barely any smoke came out.. so which tube did i put it into?

[ESG-642T]

Originally Posted by Big Daddys Stang Put it on the pcv hose..... it will be better than putting it on the gas tank etc.

Please explain.

[Redux]

BDS, do you seriously feel like getting owned again? The last time we went through this it ended with you putting that stupid ass rep excuse in your sig.....

[2002 BLK GT]

Originally Posted by ESG-642T Please explain.

Do some research dude I'm not explaining nothing to you, if the op ask then I will, and if you already know good for you... Now Redux you really make me lol each time sstang post something against me you come up quickly to the rescue..

But either way arguing over the internet is like that Olympic race you will be retarded anyways. I will if I listen to both of you. I'm just gonna keep both on the ignore list. Now if something is gonna get off topic again I'm gonna pm a mod. UNLESS is DONE by PMS.

[Redux]

First off why did you delete your post? I knew I should have quoted it.

And secondly, I wasnt "coming to the rescue" you tool. We were chatting on gchat and he had to show me what a dumbshit you were being again. I rarely get into any type of conflict with anyone on this forum but you seem to just can't help yourself from trying to act like you know everything. Your a post whore and it annoys me.

[ESG-642T]

Why would I research anything, I know what the hell I'm talking about big dumbass stang.

You pour 1/3 of it or 33.3% repeating, into your

1.) gas take
2.) oil
3.) vacuum lines

[horizontalkev]

Will someone please tell me where I ended up putting the sea foam?
Lol I appeciate big daddy stang atleast saying which hose it is.
So redux, I would like you to tell me what hose I put it into since you feel people have to give more detail

Ps: redux I'm just playing with you no hard feelings

And ESG no need for the name calling man

[Redux]

You can put the seafoam in any vacuum hose that leads to the upper intake manifold. To be sure you have a vacuum hose, pull one off and put your finger on the end of it, if it sucks then its probably a vacuum hose. Be careful though because your brake booster will do the same thing.

EDIT: No hard feelings man I understand that it seems like were dogging BDS for no reason, but trust us....He deserves it.

[horizontalkev]

Your brake booster doesn't connect to the air intake does it?
If that's not the brake booster what exactly did I put it into??

[ESG-642T]

Originally Posted by horizontalkev Your brake booster doesn't connect to the air intake does it? If that's not the brake booster what exactly did I put it into??

Yes sir it does.

[Redux]

Here is a picture of the brake booster line.

[horizontalkev]

Originally Posted by ESG-642T Yes sir it does.

Uh oh, what's this mean then?
My brakes don't seem to be affected really, will it ruin my brakes?

[ESG-642T]

Originally Posted by horizontalkev Uh oh, what's this mean then? My brakes don't seem to be affected really, will it ruin my brakes?

No, Just don't pour it into that hose because if I remember correctly it only feeds half of the cylinders. Where as a vacuum hose will feed them all.

[WLJohnson05]

Originally Posted by ESG-642T No, Just don't pour it into that hose because if I remember correctly it only feeds half of the cylinders. Where as a vacuum hose will feed them all.

exactly.
the point of using the vacuum hose that comes out the driver side cover is because it goes into the top and spreads throughout all the cylinders.

by the way the instructions for seafoam are right on the can...its pretty straightforward

[horizontalkev]

Is there a thread with a picture showing the exact picture of the tube I HAVE to put it in? One said to put it into the PCV located on drivers side by mainifold and so on but then the picture shows where the brake booster is, in the same area the PCV was explained to be..
Sorry I'm not very familiar with engines, and there are a lot of hoses big and small.
Thanks for all helping