Is a CAI hard to install?

Compy386 · January 29th, 2007, 06:30 PM

Also about how much should one cost? I saw one for 80 bucks but that seemed kinda cheap to me

It doesn't seem hard to put in but nothing is idiot proof with me :B

C MY 4D · January 29th, 2007, 06:32 PM

If you know how to use a screwdriver you'll be fine.

232stang · January 29th, 2007, 06:36 PM

you can get the shipped from ebay for about $45. i just ordered one last saturday, should be here tommorow. i bought from this guy.
http://cgi.ebay.com/ebaymotors/99-03...QQcmdZViewItem
he told me he would email me instructions, so i said ok why not. i could do it anyways without em its pretty simple. but instead he sent me pictures of it installed -_-
no biggie though. if you want to wait till tommorow ill tell you if i get it and what condition its in. because hes pretty good to deal with. if i email him, he emails me back that day or next. pretty fast shipping too. about a week and a half. he ships out in 3 business days so try to get it done early in the week. but ummm other than that, its a real simple install.

GreenFaleen · January 29th, 2007, 06:36 PM

don't pay over 60 for one and if you can start your car you can install it.

scubasteve041186 · January 29th, 2007, 09:48 PM

simple simple just look at the pieces.. pre assemble it and have an idea where evrything goes... and then go from there.. most likely you'll get some instructions. and from personal experience start with the fender well and work your way up doing the piping.

also in the big black air box you need to take out your MAF and use it with the new CAI its usually the black piece inbetween all the metal piping.
just measures air flow for your engine.

AndyG47 · January 29th, 2007, 09:57 PM

EBAY no more than $45. Maybe $50.

Mine didn't come with instructions. :mad But if you got to UPR's site you can read the instructions on theirs because it's basicly the same.

You need a flat head screwdriver and a socket set.

Oh a microwave. I had to heat one of my rubber connectors to fit it over the MAF.

DSEZ · January 29th, 2007, 10:00 PM

CAI? whats that

cars and indians?
coke and ingrediants?
chrome air induction?
cars are ignarant?
clear alumiunum interrior?

Compy386 · January 29th, 2007, 10:07 PM

Originally Posted by DSEZ

CAI? whats that

cars and indians?
coke and ingrediants?
chrome air induction?
cars are ignarant?
clear alumiunum interrior?

Cozy And Inviting

DSEZ · January 29th, 2007, 10:10 PM

thanks compy ur always a great help

i just searched ebay and all i got was gay azn porn when i typed in cozy and inviting?

itschristorres8 · January 29th, 2007, 10:13 PM

cold air intake

Compy386 · January 29th, 2007, 10:35 PM

Originally Posted by DSEZ

thanks compy ur always a great help

i just searched ebay and all i got was gay azn porn when i typed in cozy and inviting?

Lt_Crazy · January 30th, 2007, 12:10 AM

pff

I think I just pissed myself!!!!

xxrals22xx · January 30th, 2007, 12:14 AM

i got my intake for like 40 bucks shipping and all

Lt_Crazy · January 30th, 2007, 12:16 AM

fawk ure lucky i cant seem to find anything under 150$$$ Stupid borders!~!!!

xxrals22xx · January 30th, 2007, 12:17 AM

did u look on ebay

Lt_Crazy · January 30th, 2007, 12:21 AM

yup, its the shipping that cost a shit load and the duty fees once it crosses the border!!! but What do u want somethings are worth it some arn't!!!

DSEZ · January 30th, 2007, 12:24 AM

crazy ur are crazy here is a link to a guy that ships to canada for an extra 10 dollars

$23 USD buy now and $30 USD shipping to canada

http://cgi.ebay.com/ebaymotors/99-03...QQcmdZViewItem

Lt_Crazy · January 30th, 2007, 12:40 AM

hey thanks for the link!!!!!

DSEZ · January 30th, 2007, 12:41 AM

no problem ive been looking for juggalo for about a week and stumbled on it

Luvdmustang · January 30th, 2007, 05:20 AM

cold air intakes are simple to me. yup

January 29th, 2007, 06:30 PM	#1
Compy386 Regular Join Date: Jan 2007 Location: Griffin, GA Posts: 186	Is a CAI hard to install? Also about how much should one cost? I saw one for 80 bucks but that seemed kinda cheap to me It doesn't seem hard to put in but nothing is idiot proof with me :B __________________ http://img409.imageshack.us/img409/5932/siggyrm0qh2.jpg

January 29th, 2007, 06:32 PM	#2
C MY 4D Black Mamba w/ a New Box. Yeah Baby. 2003 Cobra 11.14@124.36 Join Date: Aug 2006 Location: Hampton, VA Posts: 2,878	If you know how to use a screwdriver you'll be fine. __________________ MM Cobra Club Hater Club Founder..... Need work done to your car for a great price in Hampton Roads? Shoot me a PM.

January 29th, 2007, 06:36 PM	#4
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.9@103/8.9@81 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,786	don't pay over 60 for one and if you can start your car you can install it. __________________ Scion Tc-going turbo MM 4 Banger club: Senior Ricer buy my nitrous http://www.moddedmustangs.com/forums...-kit-sale.html "Horsepower sells cars, torque wins races." -Carroll Shelby

January 29th, 2007, 09:57 PM	#6
AndyG47 Regular Join Date: Jan 2007 Location: J-Town, NJ Posts: 88	EBAY no more than $45. Maybe $50. Mine didn't come with instructions. :mad But if you got to UPR's site you can read the instructions on theirs because it's basicly the same. You need a flat head screwdriver and a socket set. Oh a microwave. I had to heat one of my rubber connectors to fit it over the MAF. __________________ 1997 F-150 4.6 V8 - Gibson headers, Flowmaster catback, Airaid intake and throttle spacer 2002 Mustang 3.8L V6 Auto - Ebay CAI with Green Performance filter, BBK Shorties, Pypes X, GT duals, Sony amp and 12" sub SEE IT HERE! Updated Nov 2007

January 29th, 2007, 10:13 PM	#10
itschristorres8 V-SICKS 00 V6 & 09 GT 13.55@103mph--stock GT Join Date: Aug 2006 Location: south florida Posts: 15,593	cold air intake __________________ The Devil & The Daily Daily-13.551@103.37mph V6- 497rwhp & 508rwtq 15psi pump

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

January 29th, 2007, 09:48 PM	#5
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,389	simple simple just look at the pieces.. pre assemble it and have an idea where evrything goes... and then go from there.. most likely you'll get some instructions. and from personal experience start with the fender well and work your way up doing the piping. also in the big black air box you need to take out your MAF and use it with the new CAI its usually the black piece inbetween all the metal piping. just measures air flow for your engine.

January 30th, 2007, 12:10 AM	#12
Lt_Crazy Enthusiast Join Date: Dec 2006 Location: Montreal, Canada Posts: 691	pff I think I just pissed myself!!!! __________________ The difference between Fiction and Reality??? Fiction has to make sense. -Tom Clancy

January 30th, 2007, 12:14 AM	#13
xxrals22xx Regular Join Date: Dec 2006 Location: saco, ME Posts: 429	i got my intake for like 40 bucks shipping and all __________________ http://i153.photobucket.com/albums/s...tattoos_-1.jpg

January 30th, 2007, 12:16 AM	#14
Lt_Crazy Enthusiast Join Date: Dec 2006 Location: Montreal, Canada Posts: 691	fawk ure lucky i cant seem to find anything under 150$$$ Stupid borders!~!!! __________________ The difference between Fiction and Reality??? Fiction has to make sense. -Tom Clancy

January 30th, 2007, 12:17 AM	#15
xxrals22xx Regular Join Date: Dec 2006 Location: saco, ME Posts: 429	did u look on ebay __________________ http://i153.photobucket.com/albums/s...tattoos_-1.jpg

January 30th, 2007, 12:21 AM	#16
Lt_Crazy Enthusiast Join Date: Dec 2006 Location: Montreal, Canada Posts: 691	yup, its the shipping that cost a shit load and the duty fees once it crosses the border!!! but What do u want somethings are worth it some arn't!!! __________________ The difference between Fiction and Reality??? Fiction has to make sense. -Tom Clancy

January 30th, 2007, 12:40 AM	#18
Lt_Crazy Enthusiast Join Date: Dec 2006 Location: Montreal, Canada Posts: 691	hey thanks for the link!!!!! __________________ The difference between Fiction and Reality??? Fiction has to make sense. -Tom Clancy

January 30th, 2007, 05:20 AM	#20
Luvdmustang Hardcore Enthusiast Join Date: Nov 2006 Location: silent hill Posts: 1,286	cold air intakes are simple to me. yup __________________ http://i179.photobucket.com/albums/w...llcardcopy.jpg

Threads Similar to: Is a CAI hard to install?
Thread	Thread Starter	Forum	Replies	Last Post
How hard?	D-Brow	Suspension	8	November 4th, 2007 01:29 AM
It was so hard lol	Timm10221	The Clubhouse	16	October 22nd, 2007 06:16 PM
how hard would it be?	AFtriathlete	99-04	13	September 19th, 2007 05:14 PM
How hard would this be?	Cricket	99-04	10	May 30th, 2007 02:08 PM
91 GT DOWN HARD	SALEEN525	5.0 Mustangs	3	April 25th, 2007 12:26 AM

All times are GMT -4. The time now is 10:40 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.