JBA headers and Pypes dual exhaust

DaemonJ · January 29th, 2007, 07:52 PM

Is any one familiar with JBA headers and Pypes dual exhaust?

I'm considering the purchase of the exhaust kit displayed at the bottom of this page. I like the fact that I can gain some power and still be legal.

I'm just curious about how loud the system is (e.g. louder than Flowmaster 40s?) and if there are any other suggestions for headers.

itschristorres8 · January 29th, 2007, 07:56 PM

so you know you will not see those hp numbers
and that exhaust wont sound like a flowmaster
mac or flowmaster 40s are the best way to go sound wise for the s197 models which im guessing is you car (05+) since that site you have is for a s197 v6

rppmoutlet has many misunderstood claims that really pisses me off. those numbers MIGHT be seen with a high hp output car. such as a s/c or turboed car. lik how it says that exhaust will give you 35RWHP. i'd be impressed if you saw 15BHP not een 15rwhp.

and for max performance long tubes will be better then the short tube headers also known as shorties

04musclestang · January 29th, 2007, 08:01 PM

Originally Posted by itschristorres8

so you know you will not see those hp numbers
and that exhaust wont sound like a flowmaster
mac or flowmaster 40s are the best way to go sound wise for the s197 models which im guessing is you car (05+) since that site you have is for a s197 v6

rppmoutlet has many misunderstood claims that really pisses me off. those numbers MIGHT be seen with a high hp output car. such as a s/c or turboed car. lik how it says that exhaust will give you 35RWHP. i'd be impressed if you saw 15BHP not een 15rwhp.

and for max performance long tubes will be better then the short tube headers also known as shorties

Longtubes are the only way youll notice any power from your exhaust other wise its all in your head the gain is too minor

DaemonJ · January 29th, 2007, 08:04 PM

Thanks for all of the info!

I had set my mind to get dual exhaust with the flowmaster 40s but no headers until I noticed that kit and the numbers it was claiming. I thought they were too good to be true and figured that someone here would know.

Again, thanks for the clarification.

Cricket · January 30th, 2007, 12:21 AM

Hey now don't knock JBA. They have some serious quality parts. As does MAC. I really wouldn't go with pypes since I really only see x-pipes from them, and also there cat backs won't give you that sound that you are really looking for. I would mix it up with JBA and MAC to be honest.

232stang · January 30th, 2007, 01:23 AM

pypes sounds extremely ricey to me.

gtg8920 · January 30th, 2007, 01:39 AM

i was going to get a pypes too but i changed my mind and im going mac

ScreaminYellow05 · January 30th, 2007, 03:22 AM

I'm a retard....BHP?

Luvdmustang · January 30th, 2007, 05:25 AM

Originally Posted by ScreaminYellow05

I'm a retard....BHP?

B.H.P stands for big horse patty

GreenFaleen · January 30th, 2007, 08:47 AM

lol
it is base horse power what the engine can produce not what it puts to the ground.

Cricket · January 30th, 2007, 11:22 AM

Originally Posted by GreenFaleen

lol
it is base horse power what the engine can produce not what it puts to the ground.

or in other words how much horsepower your car makes to the crank...engine horsepower, not wheel horsepower.

DaemonJ · January 30th, 2007, 08:35 PM

When dealing with x-pipes and h-pipes what is the difference between the off-road versions and the non off-road versions?

GreenFaleen · January 30th, 2007, 09:00 PM

off road means no cats non off road has the connection for your cats.

DaemonJ · January 30th, 2007, 09:26 PM

Is it possible to run off-road and still pass emission tests or are they for the states that do not have emission tests?

GreenFaleen · January 30th, 2007, 09:28 PM

well they are for non street legal cars like drag cars for track only or states with out emissions of course you fail without cats.

DaemonJ · January 30th, 2007, 10:19 PM

Thanks!

I'm going to owe you a few beers or steaks if you keep this up!

LOL

GreenFaleen · January 30th, 2007, 10:20 PM

hey I'm not gonna argue with that.

January 29th, 2007, 07:52 PM	#1
DaemonJ Enthusiast Join Date: Jan 2007 Location: Cookeville, TN Posts: 531 iTrader: 0 reviews	JBA headers and Pypes dual exhaust Is any one familiar with JBA headers and Pypes dual exhaust? I'm considering the purchase of the exhaust kit displayed at the bottom of this page. I like the fact that I can gain some power and still be legal. I'm just curious about how loud the system is (e.g. louder than Flowmaster 40s?) and if there are any other suggestions for headers.

January 29th, 2007, 07:56 PM	#2
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,859 iTrader: 2 reviews	so you know you will not see those hp numbers and that exhaust wont sound like a flowmaster mac or flowmaster 40s are the best way to go sound wise for the s197 models which im guessing is you car (05+) since that site you have is for a s197 v6 rppmoutlet has many misunderstood claims that really pisses me off. those numbers MIGHT be seen with a high hp output car. such as a s/c or turboed car. lik how it says that exhaust will give you 35RWHP. i'd be impressed if you saw 15BHP not een 15rwhp. and for max performance long tubes will be better then the short tube headers also known as shorties __________________ [SIGPIC][/SIGPIC] Acmillr loves me

January 30th, 2007, 03:22 AM	#8
ScreaminYellow05 Regular 2005 Ford Mustang v6 29.99@too slow Join Date: Dec 2006 Location: Waxhaw, NC Posts: 498 iTrader: 0 reviews	I'm a retard....BHP? __________________ http://www.myspace.com/waxhawwarrior

January 30th, 2007, 08:47 AM	#10
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	lol it is base horse power what the engine can produce not what it puts to the ground. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

January 30th, 2007, 09:00 PM	#13
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	off road means no cats non off road has the connection for your cats. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

January 29th, 2007, 08:04 PM	#4
DaemonJ Enthusiast Join Date: Jan 2007 Location: Cookeville, TN Posts: 531 iTrader: 0 reviews	Thanks for all of the info! I had set my mind to get dual exhaust with the flowmaster 40s but no headers until I noticed that kit and the numbers it was claiming. I thought they were too good to be true and figured that someone here would know. Again, thanks for the clarification.

January 30th, 2007, 01:39 AM	#7
gtg8920 Regular 2003 Mustang v6 vert Join Date: Dec 2006 Posts: 91 iTrader: 0 reviews	i was going to get a pypes too but i changed my mind and im going mac

January 30th, 2007, 08:35 PM	#12
DaemonJ Enthusiast Join Date: Jan 2007 Location: Cookeville, TN Posts: 531 iTrader: 0 reviews	When dealing with x-pipes and h-pipes what is the difference between the off-road versions and the non off-road versions?

January 30th, 2007, 09:26 PM	#14
DaemonJ Enthusiast Join Date: Jan 2007 Location: Cookeville, TN Posts: 531 iTrader: 0 reviews	Is it possible to run off-road and still pass emission tests or are they for the states that do not have emission tests?

January 30th, 2007, 09:28 PM	#15
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	well they are for non street legal cars like drag cars for track only or states with out emissions of course you fail without cats. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

January 30th, 2007, 10:19 PM	#16
DaemonJ Enthusiast Join Date: Jan 2007 Location: Cookeville, TN Posts: 531 iTrader: 0 reviews	Thanks! I'm going to owe you a few beers or steaks if you keep this up! LOL

January 30th, 2007, 10:20 PM	#17
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	hey I'm not gonna argue with that. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: JBA headers and Pypes dual exhaust
Thread	Thread Starter	Forum	Replies	Last Post
Question about pypes dual exhaust (2001 v6)	xSxTxAxNxGx	V6 Mustangs	2	September 22nd, 2007 10:01 PM
pypes TRUE DUAL cat back	emgjsdk1	V6 Mustangs	21	August 21st, 2007 01:00 PM
Pypes exhaust on 3.8 V6	CJRando	General Tech	12	August 13th, 2007 11:43 AM
Pypes Exhaust	acehogg69	2005 - 2010	10	July 15th, 2007 09:57 PM
Pypes Exhaust	dakooler1	General Tech	11	March 9th, 2007 06:18 PM

All times are GMT -4. The time now is 10:41 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.