BBK 70mm Throttle body

Teamsterjohn · October 27th, 2009, 05:39 PM

Is the 70mm BBK throttle body worth the price. Any better performance?

04stang123456789 · October 27th, 2009, 05:53 PM

I do not have one, but I decided not to get one because it will give you a very monimal power increase, if anything. You are better off with something like UD pullies for the price.

Teamsterjohn · October 27th, 2009, 05:54 PM

Thanks for the reply

pyschopath76 · October 27th, 2009, 06:18 PM

i have a Accufab T/B & Plenum setup and i absolutely love it. it sounds delicious sucking in all that air, and it gives me a snappier throttle response. i cant tell you about the BBK but im sure you will get the same results.

NASTY03GT · October 27th, 2009, 06:23 PM

BBK 70MM TB is really good. I know alot of people that love them on their 05+ V6s.

itschristorres8 · October 27th, 2009, 06:45 PM

they no longer make BBK 70s you have to get accufab...i wouldnt spend $300 on a TB if your all motor or even on a stock motor period

LAStang1234 · October 27th, 2009, 08:06 PM

Originally Posted by 04stang123456789

I do not have one, but I decided not to get one because it will give you a very monimal power increase, if anything. You are better off with something like UD pullies for the price.

Yea u should def take the UD pulleys over getting the new TB. Steeda has some great ones!
Steeda Underdrive Pulley System - 05-09 Ford Mustang

xXsmokinaceXx · October 31st, 2009, 01:00 PM

UDP over a throttle body for sure

ewells2420 · October 31st, 2009, 01:34 PM

On a stock motor V6 you will see now gains in a bigger TB for the most part. That is because your stock flows fine for the stock intakes. If you have ported intakes then you might see a marginal gain.

Long story short dont get it.

Teamsterjohn · October 31st, 2009, 03:45 PM

Thanks for all the help.

October 27th, 2009, 05:39 PM	#1
Teamsterjohn Newbie 2005 Mustang V6 Join Date: Oct 2009 Location: NY Posts: 23	BBK 70mm Throttle body Is the 70mm BBK throttle body worth the price. Any better performance?

October 27th, 2009, 06:18 PM	#4
pyschopath76 Regular 2004 Mustang GT slow as sin.... Join Date: Aug 2009 Location: Yokosuka, Japan Posts: 405	i have a Accufab T/B & Plenum setup and i absolutely love it. it sounds delicious sucking in all that air, and it gives me a snappier throttle response. i cant tell you about the BBK but im sure you will get the same results. __________________ JLT Ram Air Intake/Accufab 70mm Throttle Body & Upper Plenum/SLP Longtube Headers/SLP Catted X-pipe/SLP LM1/4.10 gears Military Crew - AZ2(AW) Black Stang Member #6 Mustang Tat Member #2

October 27th, 2009, 06:23 PM	#5
NASTY03GT Regular 2003 GT, 1995 GT vert 13.460@101.74 Join Date: Oct 2009 Location: Wayne Posts: 116	BBK 70MM TB is really good. I know alot of people that love them on their 05+ V6s. __________________

October 27th, 2009, 06:45 PM	#6
itschristorres8 V-SICKS 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,657	they no longer make BBK 70s you have to get accufab...i wouldnt spend $300 on a TB if your all motor or even on a stock motor period __________________ The Devil & The Daily Daily-13.37@104.4mph V6- Stock bottom-439rwhp & 402rwtq 12psi 100oct built motor-497rwhp & 508rwtq 15psi pump

October 31st, 2009, 01:00 PM	#8
xXsmokinaceXx Regular 2006 mustang v6 Join Date: Oct 2007 Location: Granbury, TX Posts: 138	UDP over a throttle body for sure __________________ S&B CAI Helix worthless throttle body spacer BBK headers Pypes Hi-Flo Cats Custom dual flowmaster set up SCT X3 4:10 with T-lok

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

October 27th, 2009, 05:53 PM	#2
04stang123456789 Regular 2004 Mustang V6 Coupe Join Date: Mar 2008 Location: Everywhere Posts: 265	I do not have one, but I decided not to get one because it will give you a very monimal power increase, if anything. You are better off with something like UD pullies for the price.

October 27th, 2009, 05:54 PM	#3
Teamsterjohn Newbie 2005 Mustang V6 Join Date: Oct 2009 Location: NY Posts: 23	Thanks for the reply

October 31st, 2009, 01:34 PM	#9
ewells2420 Regular 2003 V6 Mustang 15.1 @ 91 Join Date: Jun 2008 Location: NC Posts: 439	On a stock motor V6 you will see now gains in a bigger TB for the most part. That is because your stock flows fine for the stock intakes. If you have ported intakes then you might see a marginal gain. Long story short dont get it. __________________ MAC LTs, BBK Shorty H, MAC Catback, BBK CAI, Xcal3 93 octane tune, SFCs, Rear Seat Delete, 8.8 Rear w/4.10 gears, Tokico shocks/struts, Eibach Pro Kit, Steeda 3 bolt CC plates, Steeda bumpsteer kit, 25% ASP Underdrive pulley (crank)

October 31st, 2009, 03:45 PM	#10
Teamsterjohn Newbie 2005 Mustang V6 Join Date: Oct 2009 Location: NY Posts: 23	Thanks for all the help.

Threads Similar to: BBK 70mm Throttle body
Thread	Thread Starter	Forum	Replies	Last Post
70MM throttle Body $50.oo	330CubeGt	Air/Fuel	12	December 29th, 2008 03:02 AM
BBK 70mm Throttle Body install	rudi01	4.0L 2005+	28	November 13th, 2008 12:00 PM
FT: BBK 70mm Throttle Body and a few other stuff.	andres0286	Trade	1	March 6th, 2008 11:54 PM
70mm throttle body??	FaStStAnG5-0	Power Adders	1	October 17th, 2006 12:21 PM

All times are GMT -4. The time now is 06:01 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.