[MicronXD]

eh... my mustang was smokin.... and i was just doin my usual abusive 'pedal-to-the-floor' driving..... I'm havin trouble believing that the mustang is in good condition when i bought it 9 months ago... the warranty is just about up.... I'll be damned if it craps out on me after!!!!

[MicronXD]

any idea what it might b?

[GreenFaleen]

where is the smoke coming from?

[Juggalo_X]

and what color

[97stanger]

Originally Posted by MicronXD eh... my mustang was smokin.... and i was just doin my usual abusive 'pedal-to-the-floor' driving..... I'm havin trouble believing that the mustang is in good condition when i bought it 9 months ago... the warranty is just about up.... I'll be damned if it craps out on me after!!!!

By "usual pedal to the floor driving", do you mean that you always drive it as hard as you can? If so, you should stop. No car is made to ALWAYS be pushed to its maximum. Your putting a lot of strain on your engine. It kills power and performance. Only hit it when you need to. The smoke could be coming from your radiator(by pushing your car so hard, it is possible that you cracked your radiator). It could be coming from your block also (possible that your intake manifold gasket went bad). Could be a million places. Where was it coming from? Under the hood, tranny, or exhaust?

[Juggalo_X]

Originally Posted by 97stanger Originally Posted by MicronXD eh... my mustang was smokin.... and i was just doin my usual abusive 'pedal-to-the-floor' driving..... I'm havin trouble believing that the mustang is in good condition when i bought it 9 months ago... the warranty is just about up.... I'll be damned if it craps out on me after!!!! By "usual pedal to the floor driving", do you mean that you always drive it as hard as you can? If so, you should stop. No car is made to ALWAYS be pushed to its maximum. Your putting a lot of strain on your engine. It kills power and performance. Only hit it when you need to. The smoke could be coming from your radiator(by pushing your car so hard, it is possible that you cracked your radiator). It could be coming from your block also (possible that your intake manifold gasket went bad). Could be a million places. Where was it coming from? Under the hood, tranny, or exhaust?

i cringe when i hear people gun a cold engine gahd damn it gives me shivvers

[97stanger]

Originally Posted by Juggalo_X i cringe when i hear people gun a cold engine gahd damn it gives me shivvers

yeah, i know. its just stupid. you NEVER punch the gas on a cold motor. Its just Stupid.

[punkafi888]

i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

[Juggalo_X]

Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

ive blown a rod not by gunning a cold engine tho ive also detonated 2 pistons lmao

[punkafi888]

my sister blow her oil pump, threw 2 rod 4 valves, and a WHOLE piston! and she called me to ask me to come give her a jump. lol

[MUSTANG]

Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

One advice from me: never drive unless you heat up the engine for at least 5 min.

[MUSTANG]

Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

Hondas suck. My friend owns one and I can beat that thing 24/7 with my 1997 Mustand(completely stock)

[MUSTANG]

Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

It's pointless to race Hondas. Their engine is like 1.8 L that's like a can of coke.

[punkafi888]

dont multiple post to get you posts up.

[HMUSN]

Originally Posted by Juggalo_X Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol ive blown a rod not by gunning a cold engine tho ive also detonated 2 pistons lmao

now how exactly do you BLOW a rod?

i kinda thought you THROW them

[Juggalo_X]

Originally Posted by HMUSN Originally Posted by Juggalo_X Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol ive blown a rod not by gunning a cold engine tho ive also detonated 2 pistons lmao now how exactly do you BLOW a rod? i kinda thought you THROW them

no blow lmao mine blew out the bottom of the block deflected and hit my starter and intake too and smashed the intake to bits lol i think that merits the term blow in this case, ntm where i broke down was literally 3 houses down from the guy who kicked my car mirror off for taking a picture of his hoarse chillin by a trampoline with my cell lol long ass story

[97stanger]

Originally Posted by punkafi888 i could not imagne throughing out a bearing, or rod, or blowing a ring. i had to punch the engine cold this morning though. i was mrging into an intersection and this laydy in a black honda changed lanes right in the middle of the intersection while i was merging. thank you god for 220hp ti the tires! i think the laydy almost pi$$#d in her honda. lol

yeah, but one time isnt going to hurt you unless its like 2 degrees outside. Always doing it screws with your engine.

[Juggalo_X]

this guy must not be in a hurry to get help where is he? lol

[BWAL09]

Originally Posted by punkafi888 my sister blow her oil pump, threw 2 rod 4 valves, and a WHOLE piston! and she called me to ask me to come give her a jump. lol

LMAO.. thats funny as hell.. most chicks dont know anything about cars.. thats fine, but the problem is that they dont even care to learn..

the other day my sister called me to pick her up cause her car wouldnt crank and she SWORE that her battery was dead.. she even bet money on it.. turns out she ran out of gas


oh and the other day me and my girlfriend were in my mustang and she blew my rod.. my car wasnt even cranked.. God, i love life