[WLJohnson05]

Originally Posted by mcqueen Unless the previous owner cut the connectors out, they should be in there. They're just hiding from normal view. If you open the center arm rest, remove the 2 rubber stops, remove the 2 screws, then remove the "pocket" (I guess you could call it) then you'll be able to see inside the center console. In there are 2 connectors that completely stock V6s have no use for. One of them is for a fog light switch. The OEM fog light switches are exactly the same size as the coin holders and it just so happens the connector is located right by the coin holders. Pop a coin holder out, pop the OEM switch in, connect the fog light connector and it'll look like the car came straight from the factory with fog lights.

actually if she has an 04, all the switch wiring should be right in front of the shifter.

[mp4 player]

Originally Posted by WLJohnson05 actually if she has an 04, all the switch wiring should be right in front of the shifter.

Yes, that's correct. It doesn't look like anyone noticed it was an 01+.

In that case you need the 01-04 switch that goes in a different spot in front of your shifter.

[whitestang04]

Originally Posted by Safi There is no reason to drill into the firewall at all Just pass the line through the grommet already in place for the stock wiring

thats what i was thinking haha, i just ran mine off a sepearate switch too so i can just turn them on and off whenever i want