Aftermarket Intake Manifold

Garman91 · April 4th, 2007, 10:28 AM

Does anyone know if it's possible to order an upper intake manifold that's already been ported/polished? Preferebly w/ a 70mm TB port? I can't find any...

02ponypackage · April 4th, 2007, 10:30 AM

no but theres places you can send it out to which im sure you already know...

ESG-642T · April 4th, 2007, 10:40 AM

Yes their are...

SuperSixMotorsports is one of them....

02ponypackage · April 4th, 2007, 10:45 AM

but at SSM dont you send in your parts?

Garman91 · April 4th, 2007, 10:57 AM

I wanted to do it myself or buy one pre ported/polished. Can't find them already done and can't afford the downtime to send mine in. A USED one is $110 which seems a bit pricey to me. None of the junk yards carry 02's yet around me. Bummer! Anyone know where I can order a upper for less than $110?

Thanks for the replies guys

02ponypackage · April 4th, 2007, 10:59 AM

Ive seen used ones on forums for 40$s i dont know where your looking

Garman91 · April 4th, 2007, 11:01 AM

Please, give me a link. The locals want $110 - $150 and that's crazy, I just wanna port out the TB hole to 70mm w/o spending $200. LoL

02ponypackage · April 4th, 2007, 11:07 AM

corral.net has a V6 part section try them out u hafta sign up and their site is a pain in the ass on memberships tho its free...it may sa yur not a member tho u signed up and can re do it unless u have a 2nd email

ESG-642T · April 4th, 2007, 11:10 AM

www.supersixmotorsports.com

you can get one their already p/p & with 70mm tb

02ponypackage · April 4th, 2007, 11:14 AM

I wouldnt mind doing it myself....gotta learn some where

Cricket · April 4th, 2007, 11:40 AM

www.supersixmotorsports.com

www.rpm-mustangs.com (I have dealt with them, and wasn't too happy, but have heard other people having good dealings with them.)

ByPopularDemand · April 4th, 2007, 12:44 PM

How much power do you think that would bring in...wht a bigger tb

Cricket · April 4th, 2007, 01:00 PM

well with just the plenum ported to match...maybe 1-3, but with a fully ported, polished upper and lower intake manifold ported to match your tb...I really couldn't guess, but it would be noticeable.

WLJohnson05 · April 4th, 2007, 01:06 PM

does anyone have the step by step on doing this???

Cricket · April 4th, 2007, 01:13 PM

on doing what?
Porting and polishing?
Installing?

WLJohnson05 · April 4th, 2007, 01:38 PM

all of it, anything to offer to the project

Garman91 · April 4th, 2007, 01:50 PM

Only thing I'm looking to do is eliminate the TB spacer cause it's a pain in the ass. The TB butterfly hits the manifold if the spacer isn't there so I'm porting out the TB hole for butterfly clearance. Other than that, I don't care for the gains, I'll p/p the whole thing later on down the line...

Cricket · April 4th, 2007, 02:04 PM

If you want to the do the p&p yourself snag yourself another upper intake manifold from a junkyard mustang, and p&p so your car doesn't have any down time.

Oh here is the site for porting and polishing.

http://www.miracerros.com/mustang/port_intakes.htm

ByPopularDemand · April 5th, 2007, 03:05 PM

where is the lower intake

April 4th, 2007, 10:28 AM	#1
Garman91 Regular 02 Mustang V6 13.605 @ 101.60 Join Date: Jan 2007 Location: Brandon, FL Posts: 336 iTrader: 6 reviews	Aftermarket Intake Manifold Does anyone know if it's possible to order an upper intake manifold that's already been ported/polished? Preferebly w/ a 70mm TB port? I can't find any... __________________ BBK Intake, BBK 70MM Throttle Body w/ Port Matched Upper Intake, BBK Shorty Headers, Magnaflow Exhaust, GT Tips, Eibach Sportline Springs, EGR Delete, Aluminum DS, 7.5 T-Lok w/ 3.73's, Centerforce Clutch, ZEX 75 Shot, Sniper Tuned

April 4th, 2007, 10:30 AM	#2
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	no but theres places you can send it out to which im sure you already know... __________________ just a V6 with a bad belt slip under the hood

April 4th, 2007, 10:40 AM	#3
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	Yes their are... SuperSixMotorsports is one of them.... __________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

April 4th, 2007, 10:45 AM	#4
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	but at SSM dont you send in your parts? __________________ just a V6 with a bad belt slip under the hood

April 4th, 2007, 10:57 AM	#5
Garman91 Regular 02 Mustang V6 13.605 @ 101.60 Join Date: Jan 2007 Location: Brandon, FL Posts: 336 iTrader: 6 reviews	I wanted to do it myself or buy one pre ported/polished. Can't find them already done and can't afford the downtime to send mine in. A USED one is $110 which seems a bit pricey to me. None of the junk yards carry 02's yet around me. Bummer! Anyone know where I can order a upper for less than $110? Thanks for the replies guys __________________ BBK Intake, BBK 70MM Throttle Body w/ Port Matched Upper Intake, BBK Shorty Headers, Magnaflow Exhaust, GT Tips, Eibach Sportline Springs, EGR Delete, Aluminum DS, 7.5 T-Lok w/ 3.73's, Centerforce Clutch, ZEX 75 Shot, Sniper Tuned

April 4th, 2007, 10:59 AM	#6
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	Ive seen used ones on forums for 40$s i dont know where your looking __________________ just a V6 with a bad belt slip under the hood

April 4th, 2007, 11:01 AM	#7
Garman91 Regular 02 Mustang V6 13.605 @ 101.60 Join Date: Jan 2007 Location: Brandon, FL Posts: 336 iTrader: 6 reviews	Please, give me a link. The locals want $110 - $150 and that's crazy, I just wanna port out the TB hole to 70mm w/o spending $200. LoL __________________ BBK Intake, BBK 70MM Throttle Body w/ Port Matched Upper Intake, BBK Shorty Headers, Magnaflow Exhaust, GT Tips, Eibach Sportline Springs, EGR Delete, Aluminum DS, 7.5 T-Lok w/ 3.73's, Centerforce Clutch, ZEX 75 Shot, Sniper Tuned

April 4th, 2007, 11:07 AM	#8
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	corral.net has a V6 part section try them out u hafta sign up and their site is a pain in the ass on memberships tho its free...it may sa yur not a member tho u signed up and can re do it unless u have a 2nd email __________________ just a V6 with a bad belt slip under the hood

April 4th, 2007, 11:10 AM	#9
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	www.supersixmotorsports.com you can get one their already p/p & with 70mm tb __________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

April 4th, 2007, 11:14 AM	#10
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	I wouldnt mind doing it myself....gotta learn some where __________________ just a V6 with a bad belt slip under the hood

April 4th, 2007, 12:44 PM	#12
ByPopularDemand Hardcore Enthusiast 2000 V6 Join Date: Jan 2007 Location: Albuquerque Posts: 2,666 iTrader: 0 reviews	How much power do you think that would bring in...wht a bigger tb __________________ 2000 V6 vert Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive pulley(r.i.p), SCT tune, 8.8 rear and 4.10 gears.

April 4th, 2007, 01:06 PM	#14
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	does anyone have the step by step on doing this??? __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

April 4th, 2007, 01:38 PM	#16
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	all of it, anything to offer to the project __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

April 4th, 2007, 01:50 PM	#17
Garman91 Regular 02 Mustang V6 13.605 @ 101.60 Join Date: Jan 2007 Location: Brandon, FL Posts: 336 iTrader: 6 reviews	Only thing I'm looking to do is eliminate the TB spacer cause it's a pain in the ass. The TB butterfly hits the manifold if the spacer isn't there so I'm porting out the TB hole for butterfly clearance. Other than that, I don't care for the gains, I'll p/p the whole thing later on down the line... __________________ BBK Intake, BBK 70MM Throttle Body w/ Port Matched Upper Intake, BBK Shorty Headers, Magnaflow Exhaust, GT Tips, Eibach Sportline Springs, EGR Delete, Aluminum DS, 7.5 T-Lok w/ 3.73's, Centerforce Clutch, ZEX 75 Shot, Sniper Tuned

April 5th, 2007, 03:05 PM	#19
ByPopularDemand Hardcore Enthusiast 2000 V6 Join Date: Jan 2007 Location: Albuquerque Posts: 2,666 iTrader: 0 reviews	where is the lower intake __________________ 2000 V6 vert Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive pulley(r.i.p), SCT tune, 8.8 rear and 4.10 gears.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Aftermarket Intake Manifold
Thread	Thread Starter	Forum	Replies	Last Post
Swapping a 98 V6 intake manifold with for a 99 V6 manifold	98mustang	V6 Mustangs	6	November 20th, 2010 11:20 PM
Aftermarket intake vs Cobra intake...	Brent Russell	5.0 Mustangs	11	April 27th, 2008 10:35 PM
Intake Manifold	KLance221	96-98	19	April 11th, 2007 01:16 PM
intake manifold	ayyubam2002	General Tech	2	July 9th, 2006 12:13 PM

All times are GMT -4. The time now is 11:26 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.