Heads

lwhitetrash88l · April 5th, 2007, 11:13 PM

so heres the question, do I either take my heads in to a machine shop in the process of changing hte head gasket just to be safe and check them for warpage and have them grinded down or whatever if need, buy new heads, or just not worry about it at all?

lwhitetrash88l · April 5th, 2007, 11:14 PM

oh and also roughly how much do you think it costs to get them machined or whatever?

THSCO08 · April 5th, 2007, 11:17 PM

im in the same friggin boat. dude. really it depends on how much money you have.

THSCO08 · April 5th, 2007, 11:19 PM

it cost around 80 or so to have them pressure tested. depending on whether or not they are cracked/warped your lookin at about as much as it cost to buy new ones. around 500 bucks i think.

lwhitetrash88l · April 5th, 2007, 11:22 PM

thats fucking nuts, i def dont have that type of money....im thinking maybe just try some of that sealer shit you dump in the engine its called like BARRS LEAKS or some shit. pour a few bottles in it and go trade the bitch in

THSCO08 · April 5th, 2007, 11:24 PM

yep, i have the same problem. im taking my heads off myself bc labor for a mechanic to do it is like 300, you might as well put a used engine in it.

lwhitetrash88l · April 5th, 2007, 11:28 PM

yeah im tackling it myself man. my first time doing anything liek this. im changing my head gaskets. any tips or words of advice? lol

THSCO08 · April 5th, 2007, 11:33 PM

lol, im doing the same thing. i took my upper intake manifold off today. and im workin on the rest of it later this weekend. be careful. its a big pain in the ass. have all the right tools. know what your taking off and how to put it back together.

El_Cangri · April 6th, 2007, 12:27 AM

wait for chris or GF maybe they can help

Cricket · April 6th, 2007, 12:45 AM

What I would do is snag them from a junkyard stang, and them send em in somewhere so your car doesnt have any down time.

itschristorres8 · April 6th, 2007, 01:03 AM

im lost....are you looking for heads?

lwhitetrash88l · April 6th, 2007, 01:59 AM

nah man i have a blown head gasket

April 5th, 2007, 11:13 PM	#1
lwhitetrash88l Enthusiast 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 536 iTrader: 0 reviews	Heads so heres the question, do I either take my heads in to a machine shop in the process of changing hte head gasket just to be safe and check them for warpage and have them grinded down or whatever if need, buy new heads, or just not worry about it at all?

April 6th, 2007, 01:03 AM	#11
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,859 iTrader: 2 reviews	im lost....are you looking for heads? __________________ [SIGPIC][/SIGPIC] Acmillr loves me

Threads Similar to: Heads
Thread	Thread Starter	Forum	Replies	Last Post
GT 40 X Heads. Need Help Deciding On These Heads, Or AFR`s	BillR1970	Parts	8	May 12th, 2009 10:01 PM
GT40 heads vs GTP heads	99TurboV6Stang	5.0 Mustangs	9	September 18th, 2007 10:34 PM
RHS heads , are they good cylinder heads?	hitorx	5.0 Mustangs	25	May 12th, 2007 10:55 PM
289 Heads	ezra27	General Tech	0	December 31st, 2006 12:09 AM
Boss 302 Heads Same As Cleveland Heads?	ken5_0	Classic Mustangs	8	September 25th, 2006 04:18 PM

April 5th, 2007, 11:14 PM	#2
lwhitetrash88l Enthusiast 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 536 iTrader: 0 reviews	oh and also roughly how much do you think it costs to get them machined or whatever?

April 5th, 2007, 11:17 PM	#3
THSCO08 Newbie Join Date: Feb 2007 Posts: 15 iTrader: 0 reviews	im in the same friggin boat. dude. really it depends on how much money you have.

April 5th, 2007, 11:19 PM	#4
THSCO08 Newbie Join Date: Feb 2007 Posts: 15 iTrader: 0 reviews	it cost around 80 or so to have them pressure tested. depending on whether or not they are cracked/warped your lookin at about as much as it cost to buy new ones. around 500 bucks i think.

April 5th, 2007, 11:22 PM	#5
lwhitetrash88l Enthusiast 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 536 iTrader: 0 reviews	thats fucking nuts, i def dont have that type of money....im thinking maybe just try some of that sealer shit you dump in the engine its called like BARRS LEAKS or some shit. pour a few bottles in it and go trade the bitch in

April 5th, 2007, 11:24 PM	#6
THSCO08 Newbie Join Date: Feb 2007 Posts: 15 iTrader: 0 reviews	yep, i have the same problem. im taking my heads off myself bc labor for a mechanic to do it is like 300, you might as well put a used engine in it.

April 5th, 2007, 11:28 PM	#7
lwhitetrash88l Enthusiast 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 536 iTrader: 0 reviews	yeah im tackling it myself man. my first time doing anything liek this. im changing my head gaskets. any tips or words of advice? lol

April 5th, 2007, 11:33 PM	#8
THSCO08 Newbie Join Date: Feb 2007 Posts: 15 iTrader: 0 reviews	lol, im doing the same thing. i took my upper intake manifold off today. and im workin on the rest of it later this weekend. be careful. its a big pain in the ass. have all the right tools. know what your taking off and how to put it back together.

April 6th, 2007, 01:59 AM	#12
lwhitetrash88l Enthusiast 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 536 iTrader: 0 reviews	nah man i have a blown head gasket

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 09:43 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.