My first exterior 'mod'

Paniflo · November 15th, 2010, 04:01 PM

EDIT: New pics of the finished product(These photos were not taken in the bathroom after a hot,steamy shower)

v6kid · November 15th, 2010, 04:05 PM

Get mandrel bent and see about losing the cats.

Matt. · November 15th, 2010, 04:05 PM

Option 2, but I would see if you can get a fabbed H pipe in there too

03blackmach1 · November 15th, 2010, 04:10 PM

Go with option 2, but see if the shop can fab up your piping for you. All you need is the flowmasters and the tips you want, then they will charge around 75 to fab up some pipe. You can get it done for around 300 total

2000stallion · November 15th, 2010, 04:28 PM

option 2

6ER THEN I 8ER! · November 15th, 2010, 04:28 PM

mandrel bent is worth the $50

RZNCAIN · November 15th, 2010, 04:32 PM

Nice pics. Did you take them in the bathroom after a hot steamy shower!?

Bigg_Nate · November 15th, 2010, 04:54 PM

Like the hood and i would go with option 2

Paniflo · November 15th, 2010, 05:35 PM

Originally Posted by 6er_w/a_Vengance

mandrel bent is worth the $50

What do the mandrels do that the regulars don't? I'm a little lost on that part.

RZNCAIN · November 15th, 2010, 07:48 PM

Thanks for the neg rep douchebag! I was just kidding.

ag11hockey · November 15th, 2010, 07:53 PM

^^ rofl

v6kid · November 15th, 2010, 07:54 PM

Mandrel bends flow better, because they are smooth... The other option is crush bent the inside of the bend will be rippled.

khaos · November 15th, 2010, 08:00 PM

Not addressed as far as I can tell... Look on ebay for that small cover. You'll probably find it. Unless you don't know how to ebay, then that would suck!

Or you could even, if you like spam, post in your local craigslist auto parts want/sale section.

v6kid · November 15th, 2010, 08:02 PM

Originally Posted by khaos

Not addressed as far as I can tell... Look on ebay for that small cover. You'll probably find it. Unless you don't know how to ebay, then that would suck!

Or you could even, if you like spam, post in your local craigslist auto parts want/sale section.

I see your Ebay and Craigslist, and I raise you one Ford Stealership.

clidefr0g · November 15th, 2010, 08:05 PM

Originally Posted by michschi

Thanks for the neg rep douchebag! I was just kidding.

the v6 forum is very sensitive, please dont hurt our feelings, but seriously whoever negged him is a douchehole.

id get mandrel bends as everyone else is suggesting, and im betting a junk yard or ford dealership for the center-cap, and nice hood.

khaos · November 15th, 2010, 08:15 PM

Originally Posted by michschi

Nice pics. Did you take them in the bathroom after a hot steamy shower!?

Goodness, wouldn't you? I think half of us here would bring the whole car with us if we could!

Originally Posted by v6kid

I see your Ebay and Craigslist, and I raise you one Ford Stealership.

Foiled!

khaos · November 15th, 2010, 08:16 PM

Originally Posted by clidefr0g

the v6 forum is very sensitive, please dont hurt our feelings, but seriously whoever negged him is a douchehole.

id get mandrel bends as everyone else is suggesting, and im betting a junk yard or ford dealership for the center-cap, and nice hood.

+1

(I forget that junk yards exist..)

RZNCAIN · November 15th, 2010, 08:16 PM

^

bottled2v · November 15th, 2010, 09:04 PM

just go steal one back from someone, and keep the chain going.

. joking! scrap yard would be my first choice, if not ebay.

Barricade81 · November 16th, 2010, 01:49 AM

Originally Posted by michschi

Nice pics. Did you take them in the bathroom after a hot steamy shower!?

November 15th, 2010, 04:01 PM	#1
Paniflo Newbie Join Date: Nov 2010 Posts: 28 iTrader: 0 reviews	My first exterior 'mod' EDIT: New pics of the finished product(These photos were not taken in the bathroom after a hot,steamy shower) __________________ 2004 40th Anniversary V6 Mustang Screaming Yellow Last edited by Paniflo; November 21st, 2010 at 10:48 PM.

November 15th, 2010, 04:05 PM	#2
v6kid Hardcore Enthusiast 1999 Mustang v6 Join Date: May 2010 Location: Clearwater, FL Posts: 1,725 iTrader: 0 reviews	Get mandrel bent and see about losing the cats. __________________ I went to school to be a mechanic, so I know what I'm talking about most of the time. mods in the garage, slowly getting peppier. 6ershootout.com summer of 2012... Be There

November 15th, 2010, 04:05 PM	#3
Matt. Hardcore Enthusiast 2002 Nitrous Injected V6 12's? Join Date: Oct 2009 Location: Chester County, PA Posts: 2,414 iTrader: 0 reviews	Option 2, but I would see if you can get a fabbed H pipe in there too __________________ Project Red Magic -Full Intake, Full Exhuast,Geared, Tune, Sprayed, Dropped- -18 Inch Hypercoated Saleens wrapped in Nittos-

November 15th, 2010, 04:28 PM	#5
2000stallion Hardcore Enthusiast 2000 Mustang slow@slow Join Date: Oct 2009 Location: Kansas Posts: 2,000 iTrader: 1 reviews	option 2 __________________ For Sale: 99-04 smoked tail light covers 2000stallions Build Thread

November 15th, 2010, 04:32 PM	#7
RZNCAIN Shelby's Minion 2007 Mustang Shelby GT (Mach1) Sept. '10 ROTM Join Date: Jul 2010 Location: WI Posts: 11,490 iTrader: 2 reviews	Nice pics. Did you take them in the bathroom after a hot steamy shower!? __________________ Sponsored by Specialty Coatings Car Salesman Club- Founder -------------------------- 2007 Shelby GT- Hardparked 2003 Mach 1- Hardparked 1988 LX 5.0- Umm...Driver?

November 15th, 2010, 04:10 PM	#4
03blackmach1 Regular 2003 mustang mach 1 Join Date: Sep 2010 Location: pei Posts: 178 iTrader: 0 reviews	Go with option 2, but see if the shop can fab up your piping for you. All you need is the flowmasters and the tips you want, then they will charge around 75 to fab up some pipe. You can get it done for around 300 total

November 15th, 2010, 04:28 PM	#6
6ER THEN I 8ER! Banned Join Date: Apr 2007 Location: Portland, TN Posts: 17,515 iTrader: 3 reviews	mandrel bent is worth the $50

November 15th, 2010, 04:54 PM	#8
Bigg_Nate Regular 2000 Mustang V6 Join Date: Sep 2007 Location: Dothan,AL Posts: 126 iTrader: 0 reviews	Like the hood and i would go with option 2 __________________ 2000 full duel flowmaster 40 series with H pipe, roush stage 2 kit, 18'' ruff racing rims, k and n intake, sequential tails, and more

November 15th, 2010, 07:48 PM	#10
RZNCAIN Shelby's Minion 2007 Mustang Shelby GT (Mach1) Sept. '10 ROTM Join Date: Jul 2010 Location: WI Posts: 11,490 iTrader: 2 reviews	Thanks for the neg rep douchebag! I was just kidding. __________________ Sponsored by Specialty Coatings Car Salesman Club- Founder -------------------------- 2007 Shelby GT- Hardparked 2003 Mach 1- Hardparked 1988 LX 5.0- Umm...Driver?

November 15th, 2010, 07:53 PM	#11
ag11hockey Enthusiast 1999 Mustang V6 Join Date: May 2010 Location: Rochester NY Posts: 654 iTrader: 0 reviews	^^ rofl

November 15th, 2010, 07:54 PM	#12
v6kid Hardcore Enthusiast 1999 Mustang v6 Join Date: May 2010 Location: Clearwater, FL Posts: 1,725 iTrader: 0 reviews	Mandrel bends flow better, because they are smooth... The other option is crush bent the inside of the bend will be rippled. __________________ I went to school to be a mechanic, so I know what I'm talking about most of the time. mods in the garage, slowly getting peppier. 6ershootout.com summer of 2012... Be There

November 15th, 2010, 08:16 PM	#18
RZNCAIN Shelby's Minion 2007 Mustang Shelby GT (Mach1) Sept. '10 ROTM Join Date: Jul 2010 Location: WI Posts: 11,490 iTrader: 2 reviews	^ __________________ Sponsored by Specialty Coatings Car Salesman Club- Founder -------------------------- 2007 Shelby GT- Hardparked 2003 Mach 1- Hardparked 1988 LX 5.0- Umm...Driver?

November 15th, 2010, 09:04 PM	#19
bottled2v Hardcore Enthusiast '00 gt, '95 gt, '83 lx 11.85@116 Join Date: Oct 2010 Location: Saginaw, mi Posts: 2,434 iTrader: 0 reviews	just go steal one back from someone, and keep the chain going. . joking! scrap yard would be my first choice, if not ebay. __________________ '00 GT, hp 292's, full bolt ons, built/stalled auto, 4.10's, 150 shot-new times to come. '95 GT, 347, tko, etc-11.8@116-sold. WTT-my mildly built 4r70 for t56/tko.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: My first exterior 'mod'
Thread	Thread Starter	Forum	Replies	Last Post
Exterior	AshRacing	V6 Mustangs	4	May 2nd, 2010 05:29 PM
Need help with exterior!	acarter25	2005 - 2010	13	July 9th, 2009 03:52 PM
Very cool Exterior Mod link..	Finegan	2005 - 2010	8	March 29th, 2007 09:46 AM
Looking for a specific exterior mod for my v6	whtpny	Visual	25	February 15th, 2007 11:07 PM

All times are GMT -4. The time now is 09:56 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.