Which Exhaust tips?

v6 stunna · April 4th, 2011, 11:57 AM

getting my exhaust put out the rear tomorrow. i was planning on going with 3.5 in slanted rolled cut. but now ive been thinking about the straight cutt rolled edge but 4" instead of 3.5'? i havent had my exhaust out the back on my mustang before so will i notice and change in tone or anything. and does the tip change the exhaust sound at all? i havent experimented with tips b4 so that why i have some weird and stupid ?'s. but thanks for the reply's

Thanks Andy

Ninjawafers! · April 4th, 2011, 12:27 PM

are you keeping the v6 rear bumper or upgrading to the GT? if you are keeing it, get the smaller ones, if switching to the GT rear, then get the 4 inchers

tips wont really change the tone unless you have VERY LONG tips, but it will change the appearance. there will be a sound change also from going from dumped to pipes out the rear.

v6 stunna · April 4th, 2011, 12:29 PM

i didnt have dumps. i had side exhaust. i cut holes out in my v6 bumper..looks good. ill post a vid of how the holes turned out. and the exhaust tomorrow. but what tips will oook better? slanted or straight cut?

Ninjawafers! · April 4th, 2011, 12:31 PM

i prefer slanted cut. if you are having them out the rear with cutouts in your bumper, then i would go with 4 inch slanted if you can get them... if not, then get the 3.5 slanted.

v6 stunna · April 4th, 2011, 12:36 PM

i would go 4' but the shop's biggest ROLLED tips are 3.5. and i want rolled. it looks 100% better IMO

Ninjawafers! · April 4th, 2011, 12:43 PM

then get the 3.5... they will still look really good. 3.5 inch tips are most common ones you see

v6 stunna · April 4th, 2011, 01:24 PM

ya..i like them but like 4" too. but would slanted or straight cutt look better

Ninjawafers! · April 4th, 2011, 01:27 PM

i like slanted cut better

SlowSix · April 4th, 2011, 01:53 PM

I have 3.5" rolled 15* slant magnaflow tips...and they look awesome

02Sandstorm · April 4th, 2011, 08:44 PM

how did you cut the holes in your bumper...jw, b/c i wanna do the same thing

v6 stunna · April 4th, 2011, 09:30 PM

youll laugh but i used a box knife. is cuts great. doesnt take turns well but as long as you cut inside your lines you can sand

...but i would recommend a drimel tool

April 4th, 2011, 11:57 AM	#1
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	Which Exhaust tips? getting my exhaust put out the rear tomorrow. i was planning on going with 3.5 in slanted rolled cut. but now ive been thinking about the straight cutt rolled edge but 4" instead of 3.5'? i havent had my exhaust out the back on my mustang before so will i notice and change in tone or anything. and does the tip change the exhaust sound at all? i havent experimented with tips b4 so that why i have some weird and stupid ?'s. but thanks for the reply's Thanks Andy

April 4th, 2011, 12:27 PM	#2
Ninjawafers! muneris pro ego 97 5.0 Exploder AWD snow has nuthin on me Join Date: Aug 2006 Location: Kodiak, AK Posts: 7,379 iTrader: 1 reviews	are you keeping the v6 rear bumper or upgrading to the GT? if you are keeing it, get the smaller ones, if switching to the GT rear, then get the 4 inchers tips wont really change the tone unless you have VERY LONG tips, but it will change the appearance. there will be a sound change also from going from dumped to pipes out the rear. __________________ Buy my M90 Kit and my Gears and T-Loc! MM ZDC - Alaska Base Commander MM+ Cleavage Club #24 MM Cares Crew / Military Crew M2C2 President / USCG - OS2

April 4th, 2011, 12:31 PM	#4
Ninjawafers! muneris pro ego 97 5.0 Exploder AWD snow has nuthin on me Join Date: Aug 2006 Location: Kodiak, AK Posts: 7,379 iTrader: 1 reviews	i prefer slanted cut. if you are having them out the rear with cutouts in your bumper, then i would go with 4 inch slanted if you can get them... if not, then get the 3.5 slanted. __________________ Buy my M90 Kit and my Gears and T-Loc! MM ZDC - Alaska Base Commander MM+ Cleavage Club #24 MM Cares Crew / Military Crew M2C2 President / USCG - OS2

April 4th, 2011, 12:43 PM	#6
Ninjawafers! muneris pro ego 97 5.0 Exploder AWD snow has nuthin on me Join Date: Aug 2006 Location: Kodiak, AK Posts: 7,379 iTrader: 1 reviews	then get the 3.5... they will still look really good. 3.5 inch tips are most common ones you see __________________ Buy my M90 Kit and my Gears and T-Loc! MM ZDC - Alaska Base Commander MM+ Cleavage Club #24 MM Cares Crew / Military Crew M2C2 President / USCG - OS2

April 4th, 2011, 01:27 PM	#8
Ninjawafers! muneris pro ego 97 5.0 Exploder AWD snow has nuthin on me Join Date: Aug 2006 Location: Kodiak, AK Posts: 7,379 iTrader: 1 reviews	i like slanted cut better __________________ Buy my M90 Kit and my Gears and T-Loc! MM ZDC - Alaska Base Commander MM+ Cleavage Club #24 MM Cares Crew / Military Crew M2C2 President / USCG - OS2

April 4th, 2011, 12:29 PM	#3
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	i didnt have dumps. i had side exhaust. i cut holes out in my v6 bumper..looks good. ill post a vid of how the holes turned out. and the exhaust tomorrow. but what tips will oook better? slanted or straight cut?

April 4th, 2011, 12:36 PM	#5
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	i would go 4' but the shop's biggest ROLLED tips are 3.5. and i want rolled. it looks 100% better IMO

April 4th, 2011, 01:24 PM	#7
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	ya..i like them but like 4" too. but would slanted or straight cutt look better

April 4th, 2011, 01:53 PM	#9
SlowSix Formerly 01silversixer 2001 V6 15.47@89.57 Join Date: May 2010 Location: Pittsburgh, PA Posts: 3,471 iTrader: 1 reviews	I have 3.5" rolled 15* slant magnaflow tips...and they look awesome __________________ Build Thread

April 4th, 2011, 08:44 PM	#10
02Sandstorm Regular 03 Mach 1 Join Date: Mar 2011 Location: Concord, North Carolina Posts: 143 iTrader: 0 reviews	how did you cut the holes in your bumper...jw, b/c i wanna do the same thing

April 4th, 2011, 09:30 PM	#11
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	youll laugh but i used a box knife. is cuts great. doesnt take turns well but as long as you cut inside your lines you can sand ...but i would recommend a drimel tool

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Which Exhaust tips?
Thread	Thread Starter	Forum	Replies	Last Post
exhaust tips	BossOfDaRich	V6 Mustangs	15	March 6th, 2010 09:56 PM
exhaust tips for V6?	lkirtley23	General Tech	1	May 17th, 2007 03:09 AM
Exhaust tips	2000Mustang	V6 Mustangs	28	December 14th, 2006 08:00 PM

All times are GMT -4. The time now is 01:36 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.