the time has arrived....

Arch_Angel · May 9th, 2007, 10:38 PM

to rebuild my engine!!! w00t any advice on what parts to use?

GreenFaleen · May 9th, 2007, 10:46 PM

what all you wanna do rebuild to stock or upgrade?

Arch_Angel · May 9th, 2007, 10:56 PM

upgrade

get some extra HP out of her and get her ready for forced induction

GreenFaleen · May 9th, 2007, 11:02 PM

get a 4.2l drop from precision 97stanger just got a stage3 ready for a s/c with 300 hp for about what a full overhaul would run you

Arch_Angel · May 9th, 2007, 11:08 PM

well that 300 sounds really nice got a site?

Vendetta · May 9th, 2007, 11:12 PM

http://www.precisionengine.com/rebui...nes/index.html

there ya go... look for, 4.2L Stroker (3,8L) Super Coupe-Mustang Crate Engine with 250 horsepower and 285 ft-lbs of torque, under description. i believe you can get more power out of it too if you tell them what you would like.

GreenFaleen · May 9th, 2007, 11:16 PM

yeah that is a stock NA replacement on that page just email or call them and tell them what you want

Arch_Angel · May 9th, 2007, 11:23 PM

sweet thanks alot again guys! I was kinda looking forward to rebuilding the engine seeing how I will be going to collage for things of that nature but like I said that HP sounds good

JSapit · May 9th, 2007, 11:37 PM

I'm planning on getting the 4.2L Stroker, too. But my friend told me that stroked engines can't have a turbocharger on them. Is this true?

Also, if I swapped out the stock engine, would having the 4.2 still make my engine a V6? I want a sleeper ._.

GreenFaleen · May 9th, 2007, 11:46 PM

Originally Posted by JSapit

I'm planning on getting the 4.2L Stroker, too. But my friend told me that stroked engines can't have a turbocharger on them. Is this true?

Also, if I swapped out the stock engine, would having the 4.2 still make my engine a V6? I want a sleeper ._.

your friend is stupid hit him with a fish, and if you get a 4.2 stroker motor it is the same motor you have now with a bigger crank so it is still a v6 and a direct replacement engine.

Onemanzu · May 9th, 2007, 11:59 PM

well take your old one apart... then rebuild it with new rings nd bearings and such then sell it on ebay... totally clean it up and make it look like it was hardcore rebuilt and sell it for a lil over a grand

Arch_Angel · May 10th, 2007, 12:28 AM

lol that does sound good and would cover half of the new engine cost you and green are teh rock!

justinsstang · May 10th, 2007, 01:25 AM

sure do wish i had the money for a 4.2 stroker.

Breakout · May 10th, 2007, 07:55 AM

fa show

Onemanzu · May 10th, 2007, 07:11 PM

yuppers... the only thing is your gonna have too put about $200 into the old engine when you rebuild it just cuz thats all the clean up new parts and beer money

Arch_Angel · May 10th, 2007, 07:21 PM

lol cant forget about the beer money. but I started to tear down the old engine .....errm engine components Im not to the engine yet....and Im kinda early on the tear down but the A-holes that had it before me messed up the front fascia so I took that off and noticed my fenders where so right so I took them off....and so on and so on so now Im getting her ready for her new heart and it is uber fun doing it I never really tore down an engine before Ive helped my dad do it somewhat. Im going to be taking it slow and watch what I do while Im doing it and my new enine will be in soon!! wish me luck my friends

Onemanzu · May 10th, 2007, 07:23 PM

GL dude... take some pics can't forget that

Arch_Angel · May 10th, 2007, 07:28 PM

I will be sure too Ill post them in this thread or should I start a new one....wait there is a place for pics so Ill post them there lol and post the link here Ill more than likely have some up tomorrow oh btw have you noticed when you take off the front end of a SN95 lights and all they look like the S195 lol thought I would share that

Onemanzu · May 10th, 2007, 07:31 PM

well w.e you do post sumtin up here we like pics ... and if you have some pics of your sister throw those up too... you know which ones im talkin about

Arch_Angel · May 10th, 2007, 07:32 PM

Originally Posted by Onemanzu

well w.e you do post sumtin up here we like pics ... and if you have some pics of your sister throw those up too... you know which ones im talkin about

O.O whoa how did you know about those? lol jk

May 9th, 2007, 10:38 PM	#1
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	the time has arrived.... to rebuild my engine!!! w00t any advice on what parts to use?

May 9th, 2007, 10:46 PM	#2
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	what all you wanna do rebuild to stock or upgrade? __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

May 9th, 2007, 11:02 PM	#4
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	get a 4.2l drop from precision 97stanger just got a stage3 ready for a s/c with 300 hp for about what a full overhaul would run you __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

May 9th, 2007, 11:12 PM	#6
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102 iTrader: 0 reviews	http://www.precisionengine.com/rebui...nes/index.html there ya go... look for, 4.2L Stroker (3,8L) Super Coupe-Mustang Crate Engine with 250 horsepower and 285 ft-lbs of torque, under description. i believe you can get more power out of it too if you tell them what you would like. __________________ -mustang is a way of life...so buckle up

May 9th, 2007, 11:16 PM	#7
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	yeah that is a stock NA replacement on that page just email or call them and tell them what you want __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

May 9th, 2007, 10:56 PM	#3
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	upgrade get some extra HP out of her and get her ready for forced induction

May 9th, 2007, 11:08 PM	#5
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	well that 300 sounds really nice got a site?

May 9th, 2007, 11:23 PM	#8
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	sweet thanks alot again guys! I was kinda looking forward to rebuilding the engine seeing how I will be going to collage for things of that nature but like I said that HP sounds good

May 9th, 2007, 11:37 PM	#9
JSapit Regular Join Date: Mar 2007 Posts: 166 iTrader: 0 reviews	I'm planning on getting the 4.2L Stroker, too. But my friend told me that stroked engines can't have a turbocharger on them. Is this true? Also, if I swapped out the stock engine, would having the 4.2 still make my engine a V6? I want a sleeper ._.

May 9th, 2007, 11:59 PM	#11
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,514 Blog Entries: 1 iTrader: 0 reviews	well take your old one apart... then rebuild it with new rings nd bearings and such then sell it on ebay... totally clean it up and make it look like it was hardcore rebuilt and sell it for a lil over a grand __________________ My Foz

May 10th, 2007, 12:28 AM	#12
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	lol that does sound good and would cover half of the new engine cost you and green are teh rock!

May 10th, 2007, 01:25 AM	#13
justinsstang Enthusiast 1998 Mustang v6 Join Date: Feb 2007 Location: Poplar Bluff, Missouri Posts: 862 iTrader: 0 reviews	sure do wish i had the money for a 4.2 stroker. __________________ Red '98 Mustang. Custom Dual Exhaust w/ fabbed X pipe. CAI. 17in Black Rims w/ Aluminum Lip. Alpine Head Unit and Type-S speakers in doors and decklid. 600w Bridged BOSS amp to two 12" Audio Bahn Blue Flame Series Subs.

May 10th, 2007, 07:55 AM	#14
Breakout Tree Fiddy Z 2006 Nissan 350Z Join Date: Dec 2006 Location: Central Florida Posts: 2,031 iTrader: 0 reviews	fa show

May 10th, 2007, 07:11 PM	#15
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,514 Blog Entries: 1 iTrader: 0 reviews	yuppers... the only thing is your gonna have too put about $200 into the old engine when you rebuild it just cuz thats all the clean up new parts and beer money __________________ My Foz

May 10th, 2007, 07:21 PM	#16
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	lol cant forget about the beer money. but I started to tear down the old engine .....errm engine components Im not to the engine yet....and Im kinda early on the tear down but the A-holes that had it before me messed up the front fascia so I took that off and noticed my fenders where so right so I took them off....and so on and so on so now Im getting her ready for her new heart and it is uber fun doing it I never really tore down an engine before Ive helped my dad do it somewhat. Im going to be taking it slow and watch what I do while Im doing it and my new enine will be in soon!! wish me luck my friends

May 10th, 2007, 07:23 PM	#17
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,514 Blog Entries: 1 iTrader: 0 reviews	GL dude... take some pics can't forget that __________________ My Foz

May 10th, 2007, 07:28 PM	#18
Arch_Angel Regular Join Date: Feb 2007 Location: Belton,Tx Posts: 58 iTrader: 0 reviews	I will be sure too Ill post them in this thread or should I start a new one....wait there is a place for pics so Ill post them there lol and post the link here Ill more than likely have some up tomorrow oh btw have you noticed when you take off the front end of a SN95 lights and all they look like the S195 lol thought I would share that

May 10th, 2007, 07:31 PM	#19
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,514 Blog Entries: 1 iTrader: 0 reviews	well w.e you do post sumtin up here we like pics ... and if you have some pics of your sister throw those up too... you know which ones im talkin about __________________ My Foz

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: the time has arrived....
Thread	Thread Starter	Forum	Replies	Last Post
Arrived!	MSO	The Clubhouse	81	September 9th, 2007 03:10 PM
MGW Shifter arrived today... WOW!	Taboo	2005 - 2010	36	August 19th, 2007 03:21 PM
My DSS 331 arrived today :)	Fastpitchdad	5.0 Mustangs	22	March 7th, 2007 09:44 PM
The KB has arrived.	L33T	2005 - 2010	72	September 21st, 2006 10:06 PM
Nitrous Arrived Today	03 R Code	99-04	18	September 10th, 2006 06:11 PM

All times are GMT -4. The time now is 02:41 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.