[4U2C]

Originally Posted by Skargon Aww, I was planning on Seafoaming soon. Now I'm afraid of wasting money. Lol Was gonna do 1/3 Gas 1/3 Intake, and 1/3 Oil. "But the Oil would wait untill the next oil change so I can do it about a week before the Change." I've heard its bad to keep it in the oil?

i always used stp complete the grey bottle. Works better if you ask me. i been using that stuff for years now

[mcqueen]

Originally Posted by 4U2C uhm i thought that oil was from your kn filter as you stated in my thread? figured it was bs just to discredit kn..lol

I don't use K&N. Way too pricey for no gains over any other CAI. I just have a basic AM CAI (which I believe is Stack Racing) with a cotton filter All of that oil is from the PCV letting oil into the engine. My point was just that oil going into the engine is a bad thing because it will gunk up in the intakes/heads.



Painted it white/black because chrome just didn't fit the black/white theme I've got going. Rest of the engine will get painted black when it goes back together (or new engine will get painted black).

[4U2C]

Originally Posted by mcqueen Pull the PCV line off the the driver side valve cover while the engine is running, have 1/3 of the can of Seafoam in a cup, and put the PCV line right down next to the Seafoam. Don't dunk it in or the engine will stall, just let it slowly suck it in (the engine creates a vacuum after the throttle body and it should be strong enough to suck the liquid in if the PCV line is within a few millimeters of the Seafoam). Some people will tell you to use the brake booster line but don't listen to that, it only feeds a few of the intake runners and you want it to get to all of the runners. I like using more words

thanks i was just going to ask the same questiom

[4U2C]

Originally Posted by mp4 player If I recall correctly our drivers side valve cover has a problem with allowing oil through the PCV valve into our intake. This was fixed with a different valve cover in 01+ or you can modify the inside of the cover itself. Here's some more info on it if you're interested. My upper intake looked pretty much the same when I last had it off. 99-00 3.8L Mustang Driver's Side Valve Cover Fix

repped