99-04 door panels?

Dj1123 · May 15th, 2007, 10:34 AM

Does anyone know who makes a replacement or even an aftermarket door panel for 99-04 (or even 94-04) stangs. I've been looking everywhere. I'd rather not get them used from ebay if I can get them new from somewhere. Sometimes the mounting tabs are snapped off.

Cricket · May 15th, 2007, 10:44 AM

http://www.50resto.com/ They pretty much have it all.

direct link to them
http://www.50resto.com/products.aspx?category=M1DRPANEL

Dj1123 · May 15th, 2007, 11:04 AM

Nope. It stops at '93.

Cricket · May 15th, 2007, 11:18 AM

you may have to go with some ebay ones, or order them from ford.

Dj1123 · May 15th, 2007, 11:22 AM

Thats what I was afraid of... I don't think Ford makes them anymore and if they do they'll be outrageously expensive. I'll snoop around ebay some more.

GreenFaleen · May 15th, 2007, 12:23 PM

they make them but they are hard to find, my dash I just go replaced and I got the only new one left in america, and it is 2 tone, but it looks good, but go to a body shop and see if they know anyone you can call.

JASonic · May 15th, 2007, 01:04 PM

Those tabs suck. Mine snapped off. I have it glued on their now. I am real close to carefully running a small screw into the thing to hold it in place. Im tired of the panel coming off when I go to close the door.

GreenFaleen · May 15th, 2007, 01:09 PM

you get get replacement tabs that snap in.

1REASUN · May 15th, 2007, 01:15 PM

50 resto is a great site. try emailing them personally, and they can prob help you find or recommened where to go for the part you need if they dont have it.

Dj1123 · May 15th, 2007, 04:48 PM

interesting stuff... someone with some time and money could get rich by making those replacement panels... GF where can you get those snap in tabs?

Nick_Rapitis · May 15th, 2007, 05:21 PM

GF, where did you get your dash and how much?

scubasteve041186 · May 15th, 2007, 05:37 PM

check junk yards too buddy i bet you'll find some door panels no problem.

1REASUN · May 15th, 2007, 06:43 PM

i've checked some junkyards...i often don't see mustangs...but goodluck! maybe your places are better than mine(hopefully)

Dj1123 · May 16th, 2007, 09:53 AM

My response from 50resto.com:

Because those cars are so plentiful, your best bet is to find a good used set in a wrecking yard. They are WAY to expensive new.

Thank You,

Your friend at Latemodel Restoration Supply,
Brad Taylor
Advertising and Research Manager

I think the only problem is that the cars are so plentiful that I'm not the only one in my area looking for them. Its not too often I see 99-04 stangs in the junk yards around here anyway.

Anyone know if it'd be a good idea to get the covered with leather or something? Anyone have pics or know of a place?

GreenFaleen · May 16th, 2007, 10:02 AM

Originally Posted by Nick_Rapitis

GF, where did you get your dash and how much?

ordered new from ford, they can ship you one in from Australia, but there aren't any new ones left in america, mine was 1860

02ponypackage · May 16th, 2007, 10:14 AM

call the cops...he got robbed^.....i seen ones for the 99-04s that were made for the fitment of cages inside...was completely smooth and has a little square with the buttons and handle...but thats when you have a cage and dont want ur existing panels hitting...and they arent the most attractive thing...but not many have it...i saw it on a 03 Cobra...and it only comes in black from what i understand....i forgot the company who made it though

GreenFaleen · May 16th, 2007, 10:32 AM

Originally Posted by 02ponypackage

call the cops...he got robbed^.....i seen ones for the 99-04s that were made for the fitment of cages inside...was completely smooth and has a little square with the buttons and handle...but thats when you have a cage and dont want ur existing panels hitting...and they arent the most attractive thing...but not many have it...i saw it on a 03 Cobra...and it only comes in black from what i understand....i forgot the company who made it though

lol no insurance got robbed and it was all because the little plastic pieces on the dash that the screws in the ac bezel screw into were cracked off when my HU was stolen

May 15th, 2007, 10:34 AM	#1
Dj1123 The man with the plan 2013 Mustang GT Premium Join Date: Apr 2007 Location: Ewing, NJ Posts: 161 iTrader: 0 reviews	99-04 door panels? Does anyone know who makes a replacement or even an aftermarket door panel for 99-04 (or even 94-04) stangs. I've been looking everywhere. I'd rather not get them used from ebay if I can get them new from somewhere. Sometimes the mounting tabs are snapped off.

May 15th, 2007, 11:04 AM	#3
Dj1123 The man with the plan 2013 Mustang GT Premium Join Date: Apr 2007 Location: Ewing, NJ Posts: 161 iTrader: 0 reviews	Nope. It stops at '93. __________________ Dj1123 MILITARY CREW E5 U.S. Army Cavalry Brand new 2013 GT

May 15th, 2007, 11:22 AM	#5
Dj1123 The man with the plan 2013 Mustang GT Premium Join Date: Apr 2007 Location: Ewing, NJ Posts: 161 iTrader: 0 reviews	Thats what I was afraid of... I don't think Ford makes them anymore and if they do they'll be outrageously expensive. I'll snoop around ebay some more. __________________ Dj1123 MILITARY CREW E5 U.S. Army Cavalry Brand new 2013 GT

May 15th, 2007, 12:23 PM	#6
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	they make them but they are hard to find, my dash I just go replaced and I got the only new one left in america, and it is 2 tone, but it looks good, but go to a body shop and see if they know anyone you can call. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

May 15th, 2007, 01:09 PM	#8
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	you get get replacement tabs that snap in. __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

May 15th, 2007, 01:04 PM	#7
JASonic The George Forman of Keepers Join Date: Feb 2007 Posts: 2,385 iTrader: 20 reviews	Those tabs suck. Mine snapped off. I have it glued on their now. I am real close to carefully running a small screw into the thing to hold it in place. Im tired of the panel coming off when I go to close the door.

May 15th, 2007, 01:15 PM	#9
1REASUN Regular 99 stang Join Date: Apr 2007 Location: MN Posts: 189 iTrader: 0 reviews	50 resto is a great site. try emailing them personally, and they can prob help you find or recommened where to go for the part you need if they dont have it. __________________ 1999 Auto V6 3.8L 35th Anniversary CAI + True Duals Exhaust 17inch SVT rims, mach1grille delete, 8inch shorty antenna, 35% tint hopefully's: Tuner, UDP's, possibly 4.10 Gears, lighter driveshaft

May 15th, 2007, 04:48 PM	#10
Dj1123 The man with the plan 2013 Mustang GT Premium Join Date: Apr 2007 Location: Ewing, NJ Posts: 161 iTrader: 0 reviews	interesting stuff... someone with some time and money could get rich by making those replacement panels... GF where can you get those snap in tabs? __________________ Dj1123 MILITARY CREW E5 U.S. Army Cavalry Brand new 2013 GT

May 15th, 2007, 05:21 PM	#11
Nick_Rapitis Hardcore Enthusiast 2000 Mustang Convertible Join Date: Mar 2007 Location: 20 minutes east of cleveland ohio Posts: 1,168 iTrader: 0 reviews	GF, where did you get your dash and how much? __________________ Click The Picture!

May 15th, 2007, 05:37 PM	#12
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,382 iTrader: 0 reviews	check junk yards too buddy i bet you'll find some door panels no problem.

May 15th, 2007, 06:43 PM	#13
1REASUN Regular 99 stang Join Date: Apr 2007 Location: MN Posts: 189 iTrader: 0 reviews	i've checked some junkyards...i often don't see mustangs...but goodluck! maybe your places are better than mine(hopefully) __________________ 1999 Auto V6 3.8L 35th Anniversary CAI + True Duals Exhaust 17inch SVT rims, mach1grille delete, 8inch shorty antenna, 35% tint hopefully's: Tuner, UDP's, possibly 4.10 Gears, lighter driveshaft

May 16th, 2007, 09:53 AM	#14
Dj1123 The man with the plan 2013 Mustang GT Premium Join Date: Apr 2007 Location: Ewing, NJ Posts: 161 iTrader: 0 reviews	My response from 50resto.com: Because those cars are so plentiful, your best bet is to find a good used set in a wrecking yard. They are WAY to expensive new. Thank You, Your friend at Latemodel Restoration Supply, Brad Taylor Advertising and Research Manager I think the only problem is that the cars are so plentiful that I'm not the only one in my area looking for them. Its not too often I see 99-04 stangs in the junk yards around here anyway. Anyone know if it'd be a good idea to get the covered with leather or something? Anyone have pics or know of a place? __________________ Dj1123 MILITARY CREW E5 U.S. Army Cavalry Brand new 2013 GT

May 16th, 2007, 10:14 AM	#16
02ponypackage MM Fanatic Join Date: Oct 2006 Location: Central FL Posts: 3,405 iTrader: 0 reviews	call the cops...he got robbed^.....i seen ones for the 99-04s that were made for the fitment of cages inside...was completely smooth and has a little square with the buttons and handle...but thats when you have a cage and dont want ur existing panels hitting...and they arent the most attractive thing...but not many have it...i saw it on a 03 Cobra...and it only comes in black from what i understand....i forgot the company who made it though __________________ just a V6 with a bad belt slip under the hood

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 99-04 door panels?
Thread	Thread Starter	Forum	Replies	Last Post
Interior door panels	hopper	5.0 Mustangs	2	October 5th, 2007 01:24 PM
86 door panels	hopper	5.0 Mustangs	4	September 1st, 2007 10:14 AM
SN door panels in FOX	RaceRelated	5.0 Mustangs	1	August 16th, 2007 10:14 PM
door panels...	tnee_97stang	V6 Mustangs	2	January 13th, 2007 05:44 PM

All times are GMT -4. The time now is 11:36 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.