Hmm tryed sumtin but it didnt match up. help :S

Timmano · May 15th, 2007, 05:05 PM

i did the test where u turn your wheel and count how many times your drive shaft turns. and i did it vise versa. what i found weired i was 1:1, for one turn on the wheel my drive shaft turnt one rotation.

MustanG_guy17 · May 15th, 2007, 05:13 PM

and this means?

Timmano · May 15th, 2007, 05:16 PM

this is how u check for gear ratio.
is suppose to be 3:73(3.73 turns of drive shaft per tuern of wheel)
or 4:10.

ByPopularDemand · May 15th, 2007, 05:31 PM

Ok...??? I'm lost

97stanger · May 15th, 2007, 05:48 PM

Originally Posted by ByPopularDemand

Ok...??? I'm lost

what he is saying is this::

with 2.73 gears (which is what he has) means that your driveshaft is going to turn 2.73 times to make your wheel turn once.

with 3.73, the driveshaft turns 3.73 times for one rotation of the wheels

with 4.10, the driveshaft turns 4.10 times for one rotation of the wheel

97stanger · May 15th, 2007, 05:49 PM

Originally Posted by Timmano

this is how u check for gear ratio.
is suppose to be 3:73(3.73 turns of drive shaft per tuern of wheel)
or 4:10.

you actually have 2.73 gears. and you missed a turn. it turns 2.73 times for each rotation of the wheel

Timmano · May 15th, 2007, 05:52 PM

kk lmao....
to cheat your Gear Ratio. most people mark the tire and drive shaft. Then Turn the tire one FULL rotation. in that rotation u check how many times your drive shaft turns. most of our cars will turn 3.73 times. 4.10 times if u got 4:10 gears. But when i did the test i was 1:1. meaning my driveshaft turned ONE time per ONE rotation of my tire. that means i got 1:1 gears but thatas impossable. lol unless i did the test wrong.

97stanger · May 15th, 2007, 05:53 PM

Originally Posted by Timmano

kk lmao....
to cheat your Gear Ratio. most people mark the tire and drive shaft. Then Turn the tire one FULL rotation. in that rotation u check how many times your drive shaft turns. most of our cars will turn 3.73 times. 4.10 times if u got 4:10 gears. But when i did the test i was 1:1. meaning my driveshaft turned ONE time per ONE rotation of my tire. that means i got 1:1 gears but thatas impossable. lol unless i did the test wrong.

yeah, you did something wrong. lol. and you have 2.73 gears if your stock

Timmano · May 15th, 2007, 05:54 PM

nope i turnt the drive shaft aswell as the tirs to make sure. once and it turnt my wheel once. well to be accurate it was 1 and 1/4. i figues i had 4:10 since in 1st im at 5000rpms at 80k/mph(48.5mph)

97stanger · May 15th, 2007, 06:05 PM

Originally Posted by Timmano

nope i turnt the drive shaft aswell as the tirs to make sure. once and it turnt my wheel once. well to be accurate it was 1 and 1/4. i figues i had 4:10 since in 1st im at 5000rpms at 80k/mph(48.5mph)

...you shouldnt be going past your redline. 48.5 seems unbelievably fast in 1st gear. are you positive that your going that fast?

Timmano · May 15th, 2007, 06:07 PM

my car ant stock the guy said his son did alot of modding to it,

97stanger · May 15th, 2007, 06:08 PM

Originally Posted by Timmano

my car ant stock the guy said his son did alot of modding to it,

..he forgot to do rims. lol

Timmano · May 15th, 2007, 06:09 PM

yes. i have a auto aswell.

MustanG_guy17 · May 15th, 2007, 06:24 PM

Originally Posted by 97stanger

Originally Posted by Timmano

my car ant stock the guy said his son did alot of modding to it,

..he forgot to do rims. lol

Cesar2cool · May 16th, 2007, 12:34 PM

LOL!!

GreenFaleen · May 16th, 2007, 01:26 PM

if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph

Juggalo_X · May 16th, 2007, 01:30 PM

Originally Posted by GreenFaleen

if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph

stock gears in a 1995 are 2.73 bro.

GreenFaleen · May 16th, 2007, 01:49 PM

Originally Posted by Juggalo_X

Originally Posted by GreenFaleen

if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph

stock gears in a 1995 are 2.73 bro.

I was close just got the numbers confused lol

Juggalo_X · May 16th, 2007, 01:51 PM

Originally Posted by GreenFaleen

Originally Posted by Juggalo_X

Originally Posted by GreenFaleen

if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph

stock gears in a 1995 are 2.73 bro.

I was close just got the numbers confused lol

i do it all the time lol

97stanger · May 16th, 2007, 03:06 PM

Originally Posted by GreenFaleen

if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph

didnt i tell ya 2 months ago sn95 are 2.73? OPEN YUOR EARS!!!! lol. Just fucking wit ya man.

May 15th, 2007, 05:05 PM	#1
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	Hmm tryed sumtin but it didnt match up. help :S i did the test where u turn your wheel and count how many times your drive shaft turns. and i did it vise versa. what i found weired i was 1:1, for one turn on the wheel my drive shaft turnt one rotation. __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 15th, 2007, 05:16 PM	#3
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	this is how u check for gear ratio. is suppose to be 3:73(3.73 turns of drive shaft per tuern of wheel) or 4:10. __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 15th, 2007, 05:31 PM	#4
ByPopularDemand Hardcore Enthusiast 2000 V6 Join Date: Jan 2007 Location: Albuquerque Posts: 2,670 iTrader: 0 reviews	Ok...??? I'm lost __________________ 2000 V6 vert Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive pulley(r.i.p), SCT tune, 8.8 rear and 4.10 gears.

May 15th, 2007, 05:52 PM	#7
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	kk lmao.... to cheat your Gear Ratio. most people mark the tire and drive shaft. Then Turn the tire one FULL rotation. in that rotation u check how many times your drive shaft turns. most of our cars will turn 3.73 times. 4.10 times if u got 4:10 gears. But when i did the test i was 1:1. meaning my driveshaft turned ONE time per ONE rotation of my tire. that means i got 1:1 gears but thatas impossable. lol unless i did the test wrong. __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 15th, 2007, 05:54 PM	#9
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	nope i turnt the drive shaft aswell as the tirs to make sure. once and it turnt my wheel once. well to be accurate it was 1 and 1/4. i figues i had 4:10 since in 1st im at 5000rpms at 80k/mph(48.5mph) __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 15th, 2007, 05:13 PM	#2
MustanG_guy17 Hardcore Enthusiast 2007 Mustang GT/CS Join Date: Mar 2007 Location: Milton,Florida Posts: 1,867 iTrader: 0 reviews	and this means?

May 15th, 2007, 06:07 PM	#11
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	my car ant stock the guy said his son did alot of modding to it, __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 15th, 2007, 06:09 PM	#13
Timmano Regular 1995 Mustang V6 15.8@90.31 Join Date: Jan 2007 Location: Canada Posts: 385 iTrader: 0 reviews	yes. i have a auto aswell. __________________ Mods: BBK UD Pulleys Headers Magnaflow with H pipe 85mm Spark plug wires. K&N Air Filter.

May 16th, 2007, 01:26 PM	#16
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,906 Blog Entries: 2 iTrader: 1 reviews	if your doing 48mph in first you have stock gears which are 3.27 I think, with 4.10's you would only get to like 25mph __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Hmm tryed sumtin but it didnt match up. help :S
Thread	Thread Starter	Forum	Replies	Last Post
I didnt know this was possible?	energiesource	99-04	64	March 13th, 2008 12:58 PM
will an 02 gt motor match up to 99 components?	a_calm_victim	99-04	7	July 11th, 2007 06:59 PM
Need an alarm which one? Someone tryed to get in my mustang.	1911A1	Audio/Video	15	June 20th, 2007 02:58 PM
i tryed searching.......somebody help	83five0	5.0 Mustangs	5	February 19th, 2007 10:58 PM
didnt think i would see this	xxrals22xx	V6 Mustangs	11	February 7th, 2007 01:16 AM

All times are GMT -4. The time now is 11:34 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.